Attch 01 - NPTU Fiber Optic Cable Specifications_ Salient Characteristics.pdf
PDF 147 KB Posted
- Solicitation number
- FA441824Q0033
About this file
This document is a combined synopsis/solicitation for a Request for Quote (RFQ) related to the procurement of a fiber optic cable to support the Joint Base Charleston Nuclear Power Training Unit (NPTU). The solicitation is a 100% Small Business Set-Aside with NAICS code 335921 and a size standard of 1,000 employees.
The key requirements include providing 180 feet of 24-strand single-mode fiber optic cable with specific Amphenol connectors and labeling. The cable must be tested for continuity and attenuation to meet fiber DB loss standards, with test results provided. Offerors must submit a quote using the attached RFQ form, including the cost of shipping FOB Destination. The government will award a contract to the responsible offeror submitting the lowest priced technically acceptable offer. Quotes are due by June 26, 2024, at 2:00 PM EST. The solicitation incorporates various FAR and DFARS clauses, including restrictions on certain foreign purchases and requirements related to the Supplier Performance Risk System.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attch 02 - JB CHS NPTU Fiber Optic Cable Request for Quote.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NPTU Fiber Op�c Cable Specifica�ons/Salient Characteris�cs
The Specifications for the Single Mode Fiber Cable is as Follows:
a. 180 feet 24 strands single mode Fiber cable rated for outdoor weather with the following amphenol connections:
i. on end 1 – P/N M28876/8F11P1 (connector plug, environmental, conductive, 31 channel key-1, inline with 45 degree backshell);
ii. on end 2 – P/N M28876/8F11P2 (connector plug, environmental, conductive, 31 channel key-2, inline with 45 degree backshell),
b. Both ends of cable will have the following amphenol:
i. P/NM28876/10FC (Plug cover, with chain conductive);
ii. P/N M29504/14-4141C (2.0MM SM 126 MICRON TERMINI, Ceramic
PIN, W/CS),
iii. P/N M29504/03-4038 (Dummy pin termini for M28876); and
iv. approx. 6” to 8” from both ends will have a Brady P/N M6-19-427 (Self-
Laminating Vinyl Lables, 1.0”Hight X 1.0”Wide, white).
c. The Amphenol pinout will be pinned 1-24 and match connections on both ends.
d. Cable must be tested for continuity and attenuation for verification of being within Fiber
Db loss standards for a single cable and test results shipped with cable.
File details come from the government source that posted it. Updated .