Attachment - Statement of Work.pdf
PDF 464 KB Posted
- Solicitation number
- N68335-24-Q-0166
About this file
This document is a Statement of Work (SOW) for a federal contract opportunity solicitation. The SOW is for the procurement of AMS-S-6758 forging in accordance with AMS-F-7190, Grade C, in support of the ILLLV Program. The required quantities and dimensions are specified, along with material specifications, testing requirements, and government inspection and acceptance procedures. The related federal contract opportunity is a firm-fixed-price solicitation issued as a Request for Quote (RFQ) under Solicitation Number N68335-24-Q-0166 by the Department of the Navy Naval Air Systems Command. This is a small business set-aside with a NAICS code of 331110. The award will be made to the technically acceptable offeror with the lowest price. Proposals are due by 2:00pm EDT on June 12, 2024 and must meet all requirements outlined in the attached SOW.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work for
AMS-S-6758. Forging in accordance with AMS-F-7190, Grade C.
a) SCOPE
This statement of work (SOW) is for the Firm Fixed Price procurement of AMS-S-6758, Forging in accordance with AMS-F-7190, Grade C in support of ILLLV Program. In accordance with the specifications and dimensions provided herein. This procurement includes all associated certifications and test reports.
b) REQUIREMENTS
2.1 General
The contractor shall provide the following quantities and sizes:
QTY 5) 8.750” x 28” x 50”
The following certifications are required:
a) Raw material certification:
1) Material and original mill certifications are required and must be in English
2) Material must be DFARS Compliant.
2.2 Specifications
a) Material:
1) Material to be in accordance with AMS-S-6758. Forging process shall be in accordance with
AMS-F-7190, Grade C.
2) The following physical properties shall apply: Ultimate Tensile strength: 90,000 PSI(min)
Yield Strength: 60,000 (min) Elongation in two inches (min): 18 percent reduction of area
(min): 30 percent Brinell Hardness 187 to 241. Test specimen shall be taken from a prolongation of the forging.
3) Material shall be 100% Magnetic Particle Inspected, in accordance with ASTM-
E1444/E1444M, Performed by both Circular and Longitudinal Methods. The wet process shall be used. Material shall meet the requirements of MIL-STD-2035 except no indications greater than .062 inch are acceptable.
2.3 Government Inspection and Acceptance
Government Inspection and Acceptance of all units shall be accomplished at the destination.
3.0 PACKAGING, PRESERVATION AND SHIPPING
Packaging and preservation for shipping shall be in accordance with best commercial practices.
Shipments shall be packaged and transported (FOB Destination) via safe, secure, reliable, and traceable means of transportation and provide protection from normal climatic/weather conditions and incidental mishandling during shipping to prevent any damage or loss during shipment. All shipments under this contract shall be addressed to the NAVAIR Lakehurst Staging Facility as indicated below:
Naval Air Warfare Center, Aircraft Division
Highway Route 547
Building 148
Joint Base MDL, New Jersey 08733
ATTN: To be provided at award
4.0 POINTS OF CONTACT
Technical Point of Contact:
To be provided at award
Naval Air Warfare Center, Aircraft Division
Highway 547, Building 148
Joint Base MDL, NJ 08733-5104
Telephone: To be provided at award
E-Mail Address: To be provided at award
File details come from the government source that posted it. Updated .