Attachment J.1 - Attachment Lab Test Procedures.pdf

ATTACHMENT J.1

LABORATORY TEST PROCEDURES AS FOLLOWS:

TP-110T-03* “Tire Selection and Rims for Motor Vehicles with a GVWR of 4,536 Kilograms or Less (For Light Truck Type Vehicles Only)”

TP-111-SB0 “Rearview mirrors (school buses)” TP-111-V-01 “Rearview visibility” TP120-03 “Tire selection and rims – vehicles other than passenger cars” TP-131-SB1 pt1 “School Bus Pedestrian Safety Devices – School Bus Test” TP-217-06 “School Bus Emergency Exits and Window Retention and Release” TP-220-02 “School Bus Rollover Protection” TP-221-03 “School Bus Body Joint Strength” TP-222-05 “School Bus Passenger Seating -- Crash Protection” TP-301S-02 “Fuel system integrity – school bus moving barrier impacts” (for school buses with a GVWR over 10,000 lbs) TP-301-04 “Fuel system integrity – rear moving barrier impacts” (for school buses with a GVWR of 10,000 lbs or less) TP 403-01 “Platform Lift Systems for Motor Vehicles” TP 404-00 “Platform lift installations in motor vehicles”

*Note that the requirement in FMVSS No. 110 at S4.4.1(b) is optional for a contractor to include in their proposal

The applicable Test Procedures are located on the NHTSA website at:

https://one.nhtsa.gov/Vehicle-Safety/Test- Procedures?procedurePage=3&procedureOrder=asc&procedureSortBy=regulationNumber

Please note that Test Procedures may be updated by NHTSA at any time, and oftentimes, Test Procedures are updated to coincide with solicitation.