Attachment J-2 Drawings.pdf

SUBMITTED BY:

APPROVED BY:

DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

EASTERN SERVICE AREA – NEW YORK TECHNICAL SUPPORT CENTER

ASR

REPLACEMENT OF THE ASR BUILDING ROOF

ROOF PLAN

WHITE PLAINS WESTCHESTER COUNTY AIRPORT NY

DWG NO REV

SKETCH #1

SHEET A001 DATE

07/19/2022

5'-0"

63'-8"

NOTES:

1. CONTRACTOR SHALL REMOVE AND DISPOSE OF

THE EXISTING ROOFING SYSTM AND FACIA. ALL

DEBRIS SHALL BE REMOVED FROM THE SITE ON A

DAILY BASIS.

2. THE CONTRACTOR SHALL ENSURE THAT THE

FACILITY REMAINS PROTECTED FROM THE WEATHER

AT ALL TIMES. MEMBRANE REMOVAL SHALL BE

LIMITED TO THE AMOUNT OF NEW ROOFING SYSTEM

THAT COULD BE INSTALLED EACH DAY. TARPS SHALL

ALSO BE INSTALLED AND SECURED AT THE END OF

EACH WORK DAY.

3. CONTRACTOR IS RESPONSIBLE FOR VERIFYING

ALL DIMENSIONS.

4. THE EXISTING ROOFING MEMBRANE, INSULATION

AND CAULKING WERE TESTED FOR ASBESTOS BY THE

FAA AND ALL TEST RESULTS WERE FOUND TO BE

NEGATIVE.

28'-0"

REMOVE AND DISPOSE OF EXISTING ROOFING

SYSTEM (MEMBRANE, NAILERS, INSULATION AND

FACIA) AND INSTALL NEW FULLY ADHERED, BLACK

60 MIL EPDM ROOFING SYSTEM

ROOF PLAN

INSTALL NEW 60 MIL

EPDM ROOF

MEMBRANE

INSTALL NEW 3" RIGID INSULATION

FASTENED TO DECKING PER

MANUFACTURERS SPECIFICATIONS

INSTALL

NEW FACIA

PRESSURE SENSITVE

COVER STRIP

ROOF MEMBRANE

INSTALL

(2) 2" X 6" CONTINUOUS PRESSURE TREATED WOOD

NAILER FASTENED TO DECKING

INSALL NEW SOFFIT

METAL DECKING

CONCRETE

BLOCK

PRESSURE SENSITVE

COVER STRIP

INSTALL NEW

SOFFIT METAL DECKING

INSTALL NEW 3" RIGID INSULATION FASTENED

TO DECKING PER MANUFACTURERS

SPECIFICATIONSINSTALL NEW EPDM

ROOF MEMBRANE

INSTALL

(2) 2" X 6" CONTINUOUS PRESSURE

TREATED WOOD NAILER FASTENED TO

DECKING

ROOF MEMBRANE

INSTALL NEW

FACIA (COLOR TO

MATCH EXISTING)

END WALL

NTS

16'-0"

5'-4" A

A

B B

B A1

A A1

LONGITUDINAL WALL

NTS

EXTERIOR WALL LINE

1'-0"

1' -4

5'-0"

INSTALL NEW

CLEAT AND DRIP

EDGE

INSTALL NEW CLEAT

AND DRIP EDGE

CLEAN AND PAINT CONCRETE BLOCK

(EXTERIOR), FOUR METAL DOORS

(BOTH SIDES) AND METAL FRAMES

(TYPICAL ALL SIDES OF BUILDING)

PAINT DOOR AND

FRAME (BOTH SIDES)

PAINT DOUBLE DOOR AND

FRAME (BOTH SIDES)

PAINT DOOR AND

FRAME (BOTH SIDES)

Page-1�