Attachment II-Requirements Specifications.pdf

TITLE: High-Speed Oscilloscope Calibration Laser Requesting Lab/Division/Group:

Communications Technology Laboratory Radio Frequency Technology Division High-Speed Measurements Group (672.03)

General Statement of Need The High-Speed Measurements Group in the Communications Technology Laboratory has the need to illuminate high-speed photodiodes with ultrafast optical pulses. The repetition rate of 50 or 100 MHz is key for the phased-lock loop that aids in the oscilloscope calibration. Similarly, the phased-lock loop controls the repetition rate of the laser via the piezoelectric input.

Items and/or Ancillary Services Item 1: 1550 nm Femtosecond Laser Quantity: 1 Each Specifications--

1.1 Wavelength 1550 nm +/- 40 nm or less

1.2 Pulse Width < 100 fs

1.3 Timing Jitter < 60 fs

1.4 Repetition Rate 50 or 100 MHz

1.5 Repetition Rate Tuning Range via PZT > 100 Hz

1.6 Average output power > 10 mW

1.7 Fiber type/length PM fiber – 1 meter +/- 0.1 meter

1.8 Fiber connector FC/APC,

1.9 PZT voltage input BNC (0-1000 V)

1.10 Number of optical outputs 2 (primary output that meets specification + monitor output with relaxed specifications with FC/APC bulkhead connector)

1.11 Internal temperature controller to stabilize system (additional external temperature control is acceptable)

1.12 Must be turn-key system

Please include any required software needed

Deliver to 325 Broadway, Boulder, CO

General Statement of Need