Attachment I Work Instructions.pdf

PRELIMINARY SPECIFICATION

SHIP: USS CURTIS WILBUR (DDG 54) ITEM NO

COAR: PCN

CMP:

PLANNER

179-11-001

CEO3 -L032

NONE

LOFTIS, OLEN

ANCHETA, FREDDIE

1. SCOPE:

1.1 Title: Antenna Platform Perforated Under Plate; install

1.2 Location of Work:

1.2.1 TBD Platform, 07 Level, Frames ### - ###, Underside

1.3 Identification:

1.3.1 Quantity (6 SF), Perforated Plate, 16 Gauge, Aluminum, QQ- -A-

250/8F, Grade 5052, H32, Sheet 6E-2-3C, Item Number 8000 (Page 49) of 2.2

1.3.2 Quantity (10 EA), Nut, Self locking, 5/8 -llUNJC-3B, Steel Carbon, MIL-N-25027, Part Number 00050 of 2.3

1.3.3 Quantity (10 EA), Washer, Flat Round, 5/8 by 0.063 Inch Thick, Steel Carbon, FF-W-92B, Type A, Grade 2, Part Number 00051 of 2.3

1.3.4 Quantity (10 EA), Stud, Welded, 5/8 Inch Diameter by 1-1/2 Inch Long, Steel Carbon, MIL-S -24149/lB, Type One, Class One, Part Number 00054 of 2.3

2. REFERENCES:

2.1 Standard Items, FY25 (OH-i)

2.2 171-6218960 Rev AA, Unit Strl Arr Dwg Assy Unit 4260

2.3 150-622ll38PL Rev 157, Procurement Material List Title

3. REQUIREMENTS:

3.1 Install and maintain steel tube and clamp type staging at location listed in 1.2 in accordance with 2.2 as directed by the

SUPERVISOR, with each sufficient level and projection to safely reach and perform requirements of this Work Item.

3.1.1 Contractor must install Containment to fully enclose the equipment listed in 1.3.2 to ensure no harmful contaminants are allowed into the area which would cause damage to Ship during replacement.

(V) (G) "JOINT INSPECTION"

3.2 Accomplish a visual inspection of each perforated under plate for the antenna platform located in 1.2, for structural integrity, deterioration, pitting, each crack, and area of damage or distortion, and to determine required repairs, using 2.2 for guidance.

Report: VISUAL INSPECTION RESULTS (MC) - WORK ,' ,''l2'' COMPLETE + 0j days

SSP: YOKO-006-25 1 of 2 ITEM NO: 179-11-001

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR) . This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties.

SHIP: USS CURTIS WILBUR (DDG 54)

3.2.1 Submit one legible copy, in hard copy or approved

transferrable media, of a report listing results of the requirements of 3.1 to the SUPERVISOR.

3.3 Remove existing and install new perforated plate, each nut, washer, and stud listed in 1.3 and located in 1.2, using 2.2 and 2.3 for guidance, as designated by the SUPERVISER.

3.3.1 Restore each mating surface exposed by removal. Repair by removing each high spot, burr, abrasion, and foreign matter, where removal can be accomplished by a hand tool.

3.3.2 Chip and grind each surface flush in way of each repair.

3.3.3 Template exact size, configuration, and location from each existing shipboard condition.

3.4 Accomplish the requirements of 009-32 of 2.1, for each new and disturbed surface.

4. NOTES:

4.1 Ship's Force has tentatively offered to provide material if Contractor unable to obtain.

5. GOVERNMENT FURNISHED MATERIAL(GFM)

5.1 LLTM:

1. None.

5.2 PUSH MATERIAL:

1. None.

5.3 KITTED MATERIAL:

1. None.

SSP: YOKO-006-25 2 of 2 ITEM NO: 179-11-001

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR). This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, SHIP: USS CURTIS WILBUR )DDG 54) ITEM NO: 256-11-001

COAR: 26 PCN: ES01 -L048

:1 CMP: NONE

PLANNER: LOFTIS, OLEN

1. SCOPE:

1.1 Title: Lagging and Insulation; replace

1.2 Location of Work:

1.2.1 Throughout the Ship

1.3 Identification:

1.3.1 Not Applicable

2. REFERENCES:

2.1 NAVSEA Standard Items, (FY25 CH-l)

2.2 508-6218533 Rev V, Mchry Piping & Eqpt Insulation and Lagging Schedule

2.3 59086 -RK-STM-010/CH-505 Rev 5, Piping Systems

2.4 Lagging Priority List, Ship Force provided

3. REQUIREMENTS:

3.1 Remove existing damaged and deteriorated insulation and lagging identified in 2.4, using 2.2 and 2.3 for guidance, as designated by the

SUPERVISOR.

3.2 Accomplish the requirements of 009-11 of 2.1 for installation of new insulation and lagging to accomplish work identified in 2.4, as directed by the SUPERVISOR.

3.2.1 Accomplish the requirements of 009-32 of 2.1 for new

insulation, lagging, and reusable covers to match surrounding areas.

3.2.2 Accomplish the requirements of 009-32 of 2.1 for each surface to be insulated with the exception of non-ferrous and corrosion resistant steel (CRES) piping, plating, and vent ducting.

3.3 Template exact size, configuration, and location from each existing shipboard condition.

3.3.1 Apply designatidh, markings and color coding on new and disturbed lagging and insulation in accordance with Paragraph 505-7.8 of 2.3.

3.4 Submit one legible copy, in hard copy or approved transferable media, of a weekly report to document labor and material expenditures to the SUPERVISOR.

3.5 Accomplish the requirements of 009-32 of 2.1 for each new and disturbed surface.

4. NOTES:

4.1 Ship's Force has provided prioritized lagging list for bidding purposes. Additional Lagging may be required and must be provided via the

SSP: YOKO-006-25 1 of 2 ITEM NO: 256-11-001

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR) . This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, SUPERVISOR.

5. GOVERNMENT FURNISHED MATERIAL(GFM)

5.1 LLTM:

1. None.

5.2 PUSH MATERIAL:

1. None.

5.3 KITTED MATERIAL:

1. None.

SSP: YOKO-006-25 2 of 2 ITEM NO: 256-11-001

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR) . This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, SHIP: USS CURTIS WILBUR (DDG 54) ITEM NO: 612-21-001

COAR: 26 PCN: See Attachment A

I CMP : NONE

PLANNER: LOFTIS, OLEN

ANCHETA, FREDDIE

1. SCOPE:

1.1 Title: Access Trunk Safety Net Weight Test; accomplish

1.2 Location of Work:

1.2.1 Access Trunk (3-42-1-T)

1.2.2 Escape Trunk (3 -97 -l -T)

1.2.3 Escape Trunk (2 -322 -l -T)

1.2.4 Access Trunk (3 -322 -l -T)

1.2.5 Escape Trunk (2-334-2-T)

1.2.6 Engine Room No 2 (4-254-0-E)

1 .3 Identification:

1.3.1 Quantity (3 EA), Trunk Safety Net Assembly, DHLSD/AFOO4, DHLSD/AFOO5, Plan 9B -A, Sheet 9A and 9B of 2.2

1.3.2 Quantity (3 EA), Trunk Safety Net Assembly, DHLSD/AF015, DHLSD/AF016, DHLSD/AF017, Sheets llA through 11C of 2.2

1.3.3 Quantity (2 BA), Trunk Safety Net Assembly, DHLSD/AF019, Plan 13A-A, Sheet 13A of 2.2

1.3.4 Quantity (3 EA), Trunk Safety Net Assembly, DHLSD/AFOO1, Plan l2A-A, Sheet 12A of 2.2

1.3.5 Quantity (2 EA), Trunk Safety Net Assembly, DHLSD/AF014, Plan l4A-A, Sheet l4A of 2.2

1.3.6 Quantity (One BA), Trunk Safety Net Assembly, Between GTM 2A and 2B, DHLSD/AFOO1, Plan 12A-A, Sheet l2A and Sheet l2B of 2.2

2. REFERENCES:

2.1 Standard Items, FY25 (CH-l)

2.2 612-6566603 Rev AA, Fab & Instl of Safety Nets (Trunks)

2.3 2C6l2Cl03 Rev G/3, Lifeline, Liferail and Safety Net 2C6l2C103 Strength and Load Test

2.4 8100-1312-0254 Rev E, Access Trunk Safety

2.5 804-5184163 Rev B, Nets, Safety, Trunk

3. REQUIREMENTS:

(I) (G) "STATIC LOAD TEST"

3.1 Accomplish the requirements of 2.3, for each trunk safety net listed in 1.3, and located in 1.2, using 2.2, 2.4, and 2.5 for guidance.

3.1.1 Install new each label tag on each safety net in accordance

SSP: YOKO-006-25 1 of 3 ITEM NO: 612-21-001

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR) . This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, with 2.2.

3.1.2 Submit one legible copy, in hard copy or approved

transferrable media, of each completed data sheet of 2.2 to the

SUPERVISOR.

3.2 Accomplish the requirements of 009-32 of 2.1 for each new and disturbed surface.

4. NOTES:

4.1 None

5. GOVERNMENT FURNISHED MATERIAL(GFM)

5.1 LLTM:

1. None.

5.2 PUSH MATERIAL:

1. None.

5.3 KITTED MATERIAL:

1. None.

SSP: YOKO-006-25 2 of 3 ITEM NO: 612-21-001

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR) . This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, Attachment A

PCN Identification

CGO1 -2003 SAFETY NET WEIGHT TEST

EA01 -7805 SAFETY NET WEIGHT TEST

CFO3 -2637 SAFETY NET WEIGHT TEST

CEO3 -4773 SAFETY NET WEIGHT TEST

CEO1 -4835 SAFETY NET WEIGHT TEST

EMO2 -5124 SAFETY NET WEIGHT TEST

SSP: YOKO-006-25 3 of 3 ITEM NO: 612-21-001

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR). This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, SHIP: USS CURTIS WILBUR (DDG 54) ITEM NO: 634-10-001

COAR: 26 PCN: SSO2 -2307

CMP: NONE

_____________________________ PLANNER: LOFTIS, OLEN

ANCHETA, FREDDIE

1. SCOPE:

1.1 Title: Cosmetic Polymeric Covering System; repair

1.2 Location of Work:

1.2.1 Passage (02-154-2-L)

1.3 Identification:

1.3.1 Quantity (100 SF), Cosmetic Polymeric )PRC) Deck Covering, 10' x 10' Section of Deck Covering in Front of Wardroom

2. REFERENCES:

2.1 Standard Items, FY25 )CH -1)

2.2 634-6219440 Rev N, Deck Covering Details

2.3 631-6219391 Rev T, Paint Schedule

3. REQUIREMENTS:

3.1 Accomplish the requirements of 009-26 of 2.1, including Attachment C, for the removal of existing and installation of new cosmetic polymeric deck covering system (PRC), for deck located in 1.2 as identified in 1.3.

(V) )G) "JOINT INSPECTION"

3.1.1 Accomplish joint inspection with SUPERVISOR following the removal of existing PRC coating once substrate surface is accessible.

3.1.2 Accomplish the requirements of 009-32 of 2.1, including Table 3, Line 6, Columns A and B for surface preparation.

3.1.3 Accomplish the requirements of 009-26 of 2.1, including Attachment G for the installation of peel and stick non-skid strip.

3.2 Accomplish the requirement of 009-32 of 2.1 for each new and disturbed surface.

4. NOTES:

4.1 None.

5. GOVERNMENT FURNISHED MATERIAL (GFM)

5.1 LLTM:

1. None.

5.2 PUSH MATERIAL:

1. None.

5.3 KITTED MATERIAL:

SSP: YOKO-006-25 1 of 2 ITEMNO: 634-10-001

EXPORT CONTROLLED DATA: This document Contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR) This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative,

1. None.

SSP: YOKO-006-25 2 of 2 ITEM NO: 634-10-001

EXPORT CONTROLLED DATA: This document Contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR). This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, SHIP: USS CURTIS WILBUR (DDG 54) ITEM NO: 980-11-001

COAR: 26 PCN: EMO4 -5029

BWST FILE NO: 000-001 CMP: NONE

REVISED: 05 APR 2019 PLANNER: ANCHETA, FREDDIE

1. SCOPE:

1.1 Title: Number 3 Gas Turbine Generator Seawater Cooling Pump Rigging Services; provide

1.2 Location of Work:

1.2.1 Generator Room (3-370-0-E)

1.3 Identification:

1.3.1 Quantity (One EA), Pump Assembly, SSGTG No 3 Seawater

Circulation Cooling Pump, PMPCTFGL, l80GPM, 35P51, 3577RPM MCC VLT, APL: 017030718, Mfr: Carver Pump Company Inc, MFR ID: 9N-3500-10, MIL-P-17840

2. REFERENCES:

2.1 Standard Items, (FY25 CH-l)

3. REQUIREMENTS:

3.1 Provide crane and rigging services when directed by the SUPERVISOR, to support removal of existing equipment identified in 1.3 and located in

1.2 as designated by the SUPERVISOR.

3.1.1 Receive new equipment via the SUPERVISOR and accomplish a visual inspection for general condition and completeness.

3.1.1.1 Submit one legible copy, in hard copy or approved

transferrable media, of a report listing results of the requirements of 3.1.1 to the SUPERVISOR.

3.2 Provide crane and rigging services to transport and support installation of equipment received in 3.1.1 as designated by the

SUPERVISOR.

3.3 Accomplish the requirements of 009-32 of 2.1 for each disturbed surface.

4. NOTES:

4.1 None.

5. GOVERNMENT FURNISHED MATERIAL(GFM)

5.1 LLTM:

TOTAL NATIONAL

QUANTITY PIECE REF STOCK REQ

PROVIDED NAME Of PART NO. NO. NO. PARA NO.

Pump Assembly, APL: 017030718, 9N-3500-

1. 1 AY MIL-P-17840 10

3.1.1

5.2 PUSH MATERIAL: pa

SSP: YOKO-006-25 1 of 2 ITEM NO: 980-11-001

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR) . This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative,

1. None.

5.3 KITTED MATERIAL:

1. None.

SSP: YOKO-006-25 2 of 2 ITEM NO: 980-11-001

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.

International Traffic in Arms Regulation (ITAR) . This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative,