Attachment I Street Sweeper Specifications.pdf

Street sweeper

A Compact street sweeper with „Elevator Prinzip“ with a mechanical pick up sweeping system. Cleaning- and filtering performance in connection with a min. 6m³ hopper. With a working speed up to min. 30 km/h and a high dump of min. 2.400mm. Regardless of sun, rain, snow, high or low temperatures, the street sweeper must always perform perfect. All year round even at frost. Debris pick up without water. Damage free clean-up of cobblestones the sweeper must be suitable for special assignments like oil clean up.

Technical Description

Sweeping width:

- Central brush mind. 1.300 mm

- with right hand side brush mind 2.000 mm

- with left hand side brush, 2.600 mm - 2.800 mm

- with front sweeper min. 3.600 mm

- clean up without water must be possible all year round

- control of the broom speed or the contact pressure of the Main sweeping roller via touch display.

- Rear side brooms can be swung out, automatic adjustment of the sweeping radius to the surroundings, for example when cornering. (rear side brooms follow the steering).

- Guide bar of the front brush must lay in front of the vehicle frame and in the viewing area of the driver.

- The rear axle must be liftable and lowerable during sweeping.

Debris container (Hopper)

- Debris container made of stainless steel

- Capacity min. 6.200 Liter

- Net volume according EN 15429 min. 4.600 Liter

- Low dumping: min. 1.150 mm

- High dumping: min. 2.400 mm

- Hydraulic opening door

- Stainless steel

Water container

- Stainless steel water container

- Content min. 400 Liter

- Hydrant connection for the Elevator for cleaning

Brush/ Central brush / Mixes weed brush

- Left side brush

- Right side brush

- Central brush with high density PPL

- Front- and Side brush: PPL / ACC

- Front brush min. 180° pivot able, working width min. 3.600 mm enforced Model on 2 levels

- Mixed weed brush with three Safety devices: shut-off protection, springs and sensors

- Stone guard for front brush

- Water sprinkling system for side brushes

- Water sprinkling extensions for 180 degree front extendable brush unit

- Flexible nozzles for front brush

- Mixed weed brush with mixed trim

Drive

- Front wheel drive

- Fully hydrostatic drive with min. 40km/h

- Sweeping speed min. 30 km/h

- Drive via front axle

- Gradeability min. 20 %

- Speed limiter for working mode

Cooling system

- Suction system for the cooling system from above over the vehicle

Steering

- Steering arrangement right

- Hydraulic all-wheel steering while sweeping

- Automatic switchover from all-wheel to 2-wheel steering in transfer mode.

- Equipment right-hand-traffic

- Turning circle curb to curb according to EN 15429-1 less than 9.700 mm

Brakes

- Hydraulic Brake system on Front- and Rear wheels acting

- Disc brakes (no wet disc brake)

- Negative parking brake

Dustfilter

- Fine dust filter Gore or equal, min 5 Year warranty

- Only ePTFE Membran (no mixed tissue/ no carrier material)

- Water resistant (not only water repellent)

- Longlife design

- Guarantee min. 5 years

- Moisture resistant against rain, mud and extreme wetness

- With PM 2.5 certificate 4 stars according to EN15429/3 or better

Cabin

- Soundproof cabin, Lpa value max. 71 according to Uni-EN27574/2

- ergonomic designed Instruments

- Air condition

- sweeping function controllable via touch display and/or joystick

- 3 permanently programmed memory functions for the sweeping settings (ECO/BOOST/LEAVES)

- Standby function for the sweeping functions ( all activated functions can be switched on/off with one keystroke

- CAN-BUS-System

- Tiltable cabin

- Radio with USB, Bluetooth and hands-free-device

- Comfort driver seat, air suspension, heated, ventilated and extra padded

Mirrow/Camera

- Rear area controlling (Videocamera with Monitor)

- Camera in the sweeping area

- Mirror fort the front area

- Electrically controlled and heated mirrors

- Mirror for blind corner (ramp mirrors)

- 360 degree camera system

Suspension

- Front axle: Progressive suspension through 3 leaf spring elements, supported by vibration damper

- Rear axle: Hydropneumatic

Engine

- Turbodiesel with particle filter

- 4 Cylinder

- displacement min. 4.400 cm³

- min. 115 kW EURO 6C

- Volumen Fueltank min. 135 Liter

- Hydrauliktank min. 130 Liter

- engine with Cyclone pre-separator and safety cartridge

- fuel consumption according to ENstandard 15429-2, max. 8.0 liters/h (certificate)

Electric

- on-bord voltage 24 V

- Battery 2 x 12 V / 140 Ah

- Automatic battery disconnect switch after machine shutdown

- Rotating beacon LED orange front, left and right

- Rotating beacon LED orange rear

- Work lights LED rear

- laterally marker lights

Hydraulic

- Hydraulic tank, min. 130 litre

- Load-Sensing-System

Turbine

- Min. 2 Radial blower

- Placement right behind the Filtersystem at the rear of the vehicle on top

- Air emissions at the rear of the machine

Measurements and Weight

- Length witht 3. Brushes max. 6.000mm

- Width without brushes and mirrors max. 1.900 mm

- Width with brush und mirror max. 2.400 mm

- Height max. 3.300 mm

- Wheelbase min. 3.200 mm

- Gauge min. 1.600 mm

- Empty weight with front brush max. 7.900 kg

- Permitted total weight max. 13.200 kg

- Payload min. 5.000 kg

Tires

- Winter tires, 4 EA mounted

- Spare wheel, Winter model, loose inclosed, 1 EA

- Min. 285/70 R19,5 150J

Attachments

- Weed boom, 1 EA mounted

- Mixed set for weed brooms, (1 Set mounted)

- Mixed set for weed brooms, (1 Set additional)

- Main brush equipped with PPL occupied, mounted

- Main brush, equipped with PPL occupied (1 Set additional)

- Front brush equipped with PPL / ACC, mounted

- Front brush equipped with PPL / ACC (1 Set additional)

- Left-and right side brush, equipped with PPL / ACC, mounted

- Left and right-side brush, equipped with PPL / ACC (1 Set additional)

- Front brush min. 180° pivot able, working width min. 3.600 mm enforced Model on 2 levels

- Mixed weed brush with three Safety devices: shut-off protection, springs and sensors

- Fully automatic central lubrication system

- Suction hose fitting, rear incl. Suction hose 150 mm Ø – min. 5 m long

- Driver’s set with air suspension, heated and ventilated

- Heated and electrically adjustable exterior mirrors

- Water kit suction system

- No tool towing possible over shortest distances at low speed e.g. for loading and unloading.

- Rear rubber bumpers

- Conservation with Elaskon

- Fire extinguisher with bracket

- Safety package First Aid Set, safety vest

- Rubber floor mat and protective seat cover

- Bracket for 1 broom and 1 shoval

Elevator

- Pick-up width: min. 1300 mm

- Pick-up of solid material: min. 1200 x 900 mm

- Pick-up of round material: min. 1200 x 1000

- Pick-up of compressible materials: min. 1200 x 1000 mm

- Pick-up of branches, Length min. 900 mm

Painting

- RAL 2011

- Warn markings

- Contour markings

Sound power

- Lwa max. 99 (dB), certified

Technical Documents

- Replacement parts list

- workshop manual, printed 3 Sets, additional on CD and USB in German and English, 2EA

- Operation manual, printed 3 Sets, additional on CD and USB in German and English,

- 2 EA

- Check list, 1 EA

TÜV

- Cetification

- Operating permit

- CE-declaration of conformity

- GS-certification

Warranty

- In addition to the legal warranty: 24 month/2.400 operating hours

Customer service / Inspection of the total vehicle Customer service package for carrier vehicle /chassis and sweeper body First service after 100 hours with all needed parts and oil.

The Service has to be performed on the DPW premises, Building # 144. The machine hall may be used for the service. All needed tools and parts have to be provided by the delivering firm.

Delivery/Transfer The vehicle must be delivered assembled and ready for operation. All needed parts and attachments must be Included in the delivery.

Instruction / Briefing and demonstration for the maintenance and operation must be accomplished within 4 workdays after delivery by qualified personal of the manufacturer and arranged deadline with the responsible department. Duration of the instruction training: 8 hours. The instruction training must be carried out in German language. The Transfer hast to be performed on the DPW premises in Vilseck, Building. # 144.

All needed tools have to be provided by the delivering firm.

No additional costs are allowed to be raised or demanded for mounting, optionally modification, needed tools or material, Instructions, schooling, transportation costs, etc.

Delivery/Transfer