Attachment I - Product Specification.pdf

Mobil-Excavator 10 tn

EXCAVATOR PRODUCT SPECIFICATION

Hydraulic wheel excavator as described below inclusive delivery.

These specifications shall be construed as the minimum acceptable standards for a wheeled excavator. Should the manufacturer's current published data or specifications exceed these standards, the manufacturer's standards shall be considered minimum and shall be furnished.

All integral parts not specifically mentioned in the scope of these specifications that are necessary to provide a complete working unit shall be furnished. Additionally, the machine offered for bid shall include all standard manufacturer's equipment. The excavator must be a new current production model and shall meet all European Safety and other applicable standards as well as the German StVO (road traffic act) regulations at the time of delivery.

General description:

Hydraulic wheel excavator 10-11 tons with attachments, (for example: Takeuchi TB395W-V4 or similar):

ENGINE:

Liquid cooled four-cylinder diesel fuel operated engine, turbo-charged, reduced emissions in accordance with the European emission guideline V, Tier 4, cubic capacity min. 3,600 ccm, power rating at least 85 kw, fuel tank capacity at least 160 l.

HYDRAULIC SYSTEM:

Hydraulic pump max. flow: at least 175 l/min Hydraulic pressure: at least 350 bar Hydraulic tank capacity: at least 90 l Hydraulic system capacity: at least 205 l Hydrostatic fan drive Load Sensing Hydraulic System Hydraulic Joystick Controls 4 hydraulic control circuits, 3 of which are proportionally controlled, Flow rates and pressure can be adjusted on the display, Power-controlled load-sensing pump, Detent mode - continuous operation of the hammer line, Auto tank - pressureless return during hammer operation, Pilot operated load holding valve, lifting, arm and adjusting cylinders, End position damping in lifting, arm and swivel cylinders, Additional hydraulics installed up to the dipper arm with high-pressure shut-off valves, overload warning device + pipe burst protection (regulation according to European standard EN 474-5 Load safety device), electric gripper switch, Leakage oil line Pipe fracture safety valves on hoist, tipping, and stick cylinders, OPERATOR’S CAB:

Comfort cabin ROPS ISO12117-2 / OPG ISO10262 Level I;

Air Suspension Seat with Heat, Tiltable Steering Wheel, Cab with Automatic Climate Control System, Windshield Wiper and Washer, Skylight w/ Sunshade, 24V Power Outlet and DAB Radio with Bluetooth

ELECTICAL:

Autocruise, Multi-Switch Control Panel & Jog Dial Control 8" multifunction color touch display, E/H Control for Dozer Blade, Boom Swing and Adjust Cylinder LED working lights; Right Cover, Boom, Front Cab, and Rear Cab LED Head Lights, Turn Signals and Tail Lamps LED beacon on roof Back Buzzer 270° View Monitor Electric Fuel Supply Pump

UNDERCARRIAGE – DRIVE:

2-Wheel Steering Travel speed: 0– 5.6 kmh (creeper speed off road), 0– 10.0 kmh (off road), 0– 15 kmh (creeper speed on road), 0– 29 kmh (road travel) +/-10% Auto Cruise Control, Heavy Duty Dozer Blade at least 2300mm wide and 500 mm high Front Axle Hub Brake, Parking Brake 4 pairs of Gapless Twin Tires, Differential lock, Toolboxes lockable on both sides

UPPERCARRIAGE:

2-Piece Variable Angle Boom, Cushioned Boom, Arm and Swing Cylinders Boom Swing Stopper, Boom Holding Valve w/ Lift Alarm, Arm Holding Valve, Adjustable Cylinder Holding Valve Lifting Point of Bucket Linkage, Stick: 210 c m + / - 5cm Pipe fracture safety valves on hoist, tipping, and stick cylinders, Boom swing angle (L/R): 68° / 59°

DIMENSIONS:

Max. Teeth height at least 8260 mm Max. Dumping height at least 6200 mm Max. Digging depth at least 4000 mm Max. Reach at ground level at least 8100 mm Max. Breakout force (ISO 6015) at least 58 kN Max. Digging force (ISO 6015) at least 43 kN Operating weight 10600 kg +/- 300 kg Transportation height over cabin max. 3200 mm Transportation length with stick 2100 mm max. 6600 mm Machine width max. 2 380 mm Turning radius over tail max. 1690 mm Ground clearance at least 320 mm

ADDITIONAL REQUIREMENTS AND ACCESSORIES:

Warning triangle First aid kit.

Fire extinguisher.

Tool equipment, Central lubrication system for upper carriage and attachment, automatically, extension for quick coupler and for connecting link.

Powertilt swing motor (2 x 90°) with hydraulic quick coupler Lehnhoff HS08 DL including load hasps 5 tn.

1 ea quick coupler (QC) trench clearing tub 1500 mm wide, 280 l.

1 ea QC bucket 600 mm wide, 4 teeth, 220 l, made of Hardox, with plug-on knife with replacement teeth.

1 ea QC Powerspade-bucket, 320 mm wide, length 1000 mm, with second quick coupling for vertical work, with douple cutting knife.

1 ea sorting grab SG9050, with rotor, 500 mm wide; opening 1350 mm, 5 teeth, with additional softgrip.

1 ea QC gripping adapter for holding grippers.

2 set technical literature for equipment and attachments consisting of operation and maintenance manuals, as well as spare parts list in German language.

Alternative key General working permission

WARRANTY AND SERVICE

2 year warranty limited warranty First service including material.

Note: All attachments must be compatible and fully operational with the main equipment.

An instruction and demonstration has to be provided for operator and maintenance personnel within four (4) days after delivery from a qualified person of the manufacturer in timing with the responsible division. Time of instruction and demonstration ca. 8 hours in German language.

DELIVERY ADDRESS:

USAG BAVARIA, DPW, BUILDINGS & GROUNDS BRANCH

Lager Geb. 329

92655 GRAFENWOEHR