Attachment I - Lock Box Specifications.docx
DOCX document 14 KB Posted
- Attached to
- RFP - Vehicle Weapon Lock Boxes Federal contract opportunity
- Solicitation number
- Not on record
About this file
The provided document is an attachment specifying the requirements for vehicle weapon lock boxes as part of a federal contract solicitation. The solicitation seeks proposals for three sizes of lock boxes with steel construction, reinforced lids, multi-point locking systems, and various mounting options. The lock boxes must meet specific dimensional, material, and security requirements.
The federal contract opportunity is a Request for Proposal (RFP) issued by the Department of Justice Federal Bureau of Investigation Headquarters Division for Vehicle Weapon Lock Boxes. This is a Total Small Business Set-Aside with a solicitation release date of August 27, 2024, questions due by September 10, 2024, proposals due by September 26, 2024, and an anticipated award date of September 27, 2024.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Vehicle Weapon Lock Boxes IDIQ Vendor Questions with Govt Responses - SAM.gov.pdf | ||
| RFP - Lock Boxes IDIQ updated 09132024.pdf | ||
| Full Text- Incorporated Clauses.pdf | ||
| Attachment II Past Performance Questionnaire.docx | DOCX document | |
| Attachment I - Lock Box Specifications.docx | DOCX document | |
| Attachment II Past Performance Questionnaire.docx | DOCX document | |
| RFP - Lock Boxes IDIQ.pdf | ||
| Consolidation - Lock Boxes V2 - Redacted - SAM.gov.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Large Box 1
Steel construction
Top loading lid with reinforced piano hinge
Box size shall be 37” W X 14” D X 10” H
Minimum steel thickness is 16 gauge
Minimum 3 point locking system with anti-pry lid with a high security key lock (Medeco or similar)
Powder coated or epoxy coated interior and exterior
Foam liner and gas strut/shock assisted opening.
Bottom mounting holes
Minimum 36”L X 3/8” diameter PVC coated heavy duty steel cable for alternate mounting
· Alternate mounting cable shall be mountable from the interior of the lock box.
Large Box 2
½ Top loading lid with reinforced piano hinge for mounting length wise in smaller SUV’s
Box size shall be 37” W X 14” D X 10” H
Minimum steel thickness is 16 gauge
Minimum 3 point locking system with anti-pry lid with a high security key lock (Medeco or similar)
Powder coated or epoxy coated interior and exterior
Foam liner and gas strut/shock assisted opening.
Bottom mounting holes
Minimum 36”L X 3/8” diameter PVC coated heavy duty steel cable for alternate mounting
· Alternate mounting cable shall be mountable from the interior of the lock box.
Small Box 3
Top loading lid with reinforced piano hinge
Preferred Exterior Box size shall be 9.75” W X 6.5” D X 1.8” H Preferred Interior size shall be minimum 7.75” W X 6.125” D X 1.75” H Proposed Solution shall not exceed an exterior size of 10” W x 8” D x 3” H
Minimum steel thickness is 16 gauge
Minimum 3 point locking system with an anti-pry Lid with a combination lock or high security key lock (Medeco or similar)
Powder coated or epoxy coated interior and exterior
Foam liner and 2 ft. Minimum Length 2000lb test security cable
File details come from the government source that posted it. Updated .