Attachment.1 Specification Pillow Ticking Fabric and Sewing.pdf

This is a product specification document for plain white pillow ticking. The item must be manufactured from 100% new carded plain white cotton without patterns or designs, featuring a 200 thread count with 30/30 warp and filling composition. The fabric shall have a backfilled air permeability finish rated at 10 CFM or below, with finished dimensions of approximately 19 inches width by 26 inches length.

The ticking must be sewn on three sides using a straight stitch interlock sewing machine with a minimum of 10-12 stitches per inch, with a 6.5-inch opening on one corner featuring a 1-inch seam. The opening threads must be terminated securely to prevent loosening when the ticking is placed over a Pillow Vac pillow renovating machine. After turning right side out, the ticking shall be stacked in groups of 25 pieces per stack, folded in half, and packaged with 4 bundles (100 pieces total) per box measuring 15 inches by 20 inches by 6.5 inches. The specified manufacturer is Harris Pillow Supply with item number A1000.5.