Attachment C - Specifications - Pages 1-2.docx
DOCX document 227 KB Posted
- Solicitation number
- 3000023117
- Issued by
- Terrebonne Parish, Louisiana
About this file
This document is an Attachment C - Specifications for an RFx 3000023117 issued by the Louisiana University Marine Consortium (LUMCON) to construct a stainless steel guardrail on the edge of the concrete landing area at their New Blue Works Facility in Houma, Louisiana. The contractor shall furnish all labor and materials to fabricate and install approximately 92 feet of 42-1/2 inch tall stainless steel guardrail, including 4 hinged gates. The guardrail shall be fabricated in sections using 1-1/2 inch stainless steel round tubing legs, welded stainless steel wire mesh panels, and a 2 inch stainless steel handrail. The work must be performed Monday through Friday from 7:00 AM to 4:00 PM, and the contractor shall follow all agency policies and procedures, remove all waste and debris daily, and restore all disturbed areas.
The document provides detailed specifications for the guardrail construction, including measurements, materials, and the gated portions. It also outlines general terms and conditions, such as the agency contact information, work hours, and site restoration requirements. No additional pricing, funding, or set-aside information is provided in the document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 3000023117-1.pdf | ||
| 3000023117.pdf | ||
| Attachment A - Special Terms and Conditions Pages 1-13.docx | DOCX document | |
| Attachment B - Job Site Verification Form - Page 1.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment C Specifications RFx 3000023117
Scope of Work Contractor shall all furnish labor and materials to construct a stainless steel guardrail on the edge of the concrete landing area in the rear of the Louisiana University Marine Consortium’s (LUMCON) New Blue Works Facility.
Site Location LUMCON Blue Works Houma 335 Dickson Rd Houma, La 70363
Specifications
- Contractor shall fabricate, and install approximately 92 feet of stainless steel guardrail at LUMCON's Blue Works Facility in Houma, LA.
- Guardrail shall be fabricated entirely of stainless steel and shall be approximately 42-1/2 inches tall and approximately 92 feet long.
- Guard rail shall be fabricated in sections that will be anchored to the concrete using concrete wedge type anchors and include 4 hinged gates.
- Each section of the guardrail shall be comprised of 1-1/2 inch stainless steel round tubing legs, welded stainless steel wire mesh panels with a 2 inch x 2 inch opening, and a 2 inch stainless steel handrail made of polished 180 grit stainless steel.
- The gated portion shall have a stationary post or posts in the center with an opening of approximately 10-12 feet per side allowing for two 5-6 feet lockable latching hinge gates on each side.
- All measurements shall be verified by the Contractor.
General Terms and Conditions
| • | All work shall be performed Monday through Friday from 7:00 AM to 4:00 PM. Agency contact is Donna Lottinger (985) 851-2812. |
| • | Contractor's representatives shall follow all agency policy and procedures while performing work on facility grounds. |
· All waste and debris shall be removed from the site daily and disposed of properly by the contractor. All waste and debris shall be assessed by the appropriate site staff before it is removed from the site.
· Contractor shall restore all areas disturbed by their work activity to pre-work conditions.
Guardrail Picture
Guardrail Drawing image1.png image2.png
File details come from the government source that posted it. Updated .