Attachment C.pdf
PDF 43 KB Posted
- Attached to
- Abbeville County Bridge
- Solicitation number
- 5400020272
- Issued by
- Abbeville County, South Carolina
About this file
This is a Qualified Product Policy document issued by the South Carolina Department of Transportation (SCDOT) establishing specifications and approved manufacturers for cold-applied sealants used in bridge joint applications. The policy specifies that cold-applied bridge joint filler material must be a polymeric elastomeric two-component sealant meeting or exceeding ASTM C 920 standards for multiple-component self-leveling materials, or alternatively, a self-leveling, cold-applied, rapid cure, two-part, ultra-low modulus, 100 percent silicone rubber sealant capable of accommodating movements up to plus or minus one-half inch for bridge joints one to three inches wide. Backer rods must consist of circular cross-section closed-cell polyethylene foam, generally one-eighth inch greater in diameter than the joint width. All materials must be installed according to manufacturer instructions and sourced only from SCDOT's qualified product list.
Manufacturers seeking qualification must demonstrate that their materials meet specifications, perform successfully in applications within South Carolina and other states, and will be used in SCDOT work. Qualified manufacturers must provide technical data sheets and furnish certifications with each shipment confirming compliance with SCDOT specifications. Shipment containers must be clearly marked with manufacturer name or trademark, lot number, component type, and shelf-life expiration date. The qualified product list includes nine approved manufacturers offering polymeric elastomeric sealants and silicone sealants from companies including W.R. Meadows of Georgia, Lion Oil Company, Sika Corporation, Pecora Corporation, BASF Corporation, The Dow Chemical Company, Watson Bowman Acme, and EMSEAL Joint Systems Ltd. Inquiries regarding product qualification should be directed to Caleb Gunter, PE Structural Materials Engineer, at the SCDOT Office of Materials & Research.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment B.pdf | ||
| Solicitation.pdf | ||
| Attachment F.docx | DOCX document | |
| Attachment E.pdf | ||
| Attachment D.pdf | ||
| Attachment A.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
QUALIFIED PRODUCT POLICY #11
JULY 22, 2019
SOUTH CAROLINA
DEPARTMENT OF TRANSPORTATION
QUALIFIED PRODUCT POLICY
FOR
COLD APPLIED SEALANTS FOR BRIDGE JOINTS
QUALIFIED PRODUCT LIST 11
Requests to qualify a product should be submitted to:
Caleb Gunter, PE Structural Materials Engineer Office of Materials & Research
SCDOT
PO Box 191 Columbia, SC 29202
(803) 737-6694 Email: guntercb@scdot.org
Cold applied bridge joint filler material shall be a polymeric elastomeric two component sealant recommended by the manufacturer for use in bridge joints and shall meet or exceed the requirements of ASTM C 920 for a multiple component self-leveling material.
Silicone Sealant. As an alternative to the above, the contractor has the option to use a self-leveling, cold applied, rapid cure, two-part, ultra low modulus, and 100 percent silicone rubber sealant. Material is packaged such that no pre-mixing on measuring is required. The sealant is capable of accommodating movements up to + 1/2 inch for bridge joints 1 to 3 inches wide.
Backer Rod. The backer rod is circular cross-section and consists of closed cell polyethylene foam. Generally it will be 1/8" greater diameter than the joint width.
All materials are installed in accordance with the manufacturer's instructions.
Only material from sources appearing on the Department's qualified product list entitled 'Qualified Cold Applied Sealants for Bridge Joints' are used in the work. A manufacturer may request to be included on the list by successfully demonstrating that his material meets the specification above, performs in applications in this state and other states and will be used in SCDOT work. Further, a manufacturer furnishes technical data sheets describing the material and its application. For each shipment, he furnishes a certification stating that the material furnished meets the South Carolina Department of Transportation specifications. The shipment containers are plainly marked with the manufacturer's name or trademark, the lot number, component type, and a clear date indicating shelf life expiration date.
mailto:guntercb@scdot.org
July 22, 2019
SOUTH CAROLINA DEPARTMENT OF TRANSPORTATION
Qualified Cold Applied Sealants for Bridge Joints
Manufacturer Product
Polymeric Elastomeric Two Component Sealant
W. R. Meadows of Georgia SOF-SEAL 224 100 Riverside Drive No Primer Necessary Cartersville, GA 30120 1-770-386-6440 1-800-342-5976 Jim Nelson
Lion Oil Company Protective Coatings Department Elastomeric Sealant El Dorado Refinery Lion D200 (Summer Grade) 1000 McHenry (Physical Address) Lion D200 (Winter Grade) El Dorado, AR 71730 1-800-643-1506
Lion Oil Company Protective Coatings Department El Dorado Refinery PO Box 7005 (Mailing Address) El Dorado, AR 71731-7005 1-800-643-1506
Sika Corporation Sikaflex-2C/SL 3778 La Vista Road Color - Precast Gray Suite 300 Tucker, GA 30084
1-800-933-SIKS
FAX: (404) 315-0117
Pecora Corporation 165 Wambold Road NR 200 Harleysville, PA 19438 Primer 200 1-215-799-7557 1-267-816-7720 Glen Murphy
FAX: (215) 721-0286
www.pecora.com http://www.pecora.com/
BASF Corporation Master Builders Solutions MasterSeal NP 2 889 Valley Park Drive MasterSeal SL2 Shakopee, MN 55379 1-800-433-9517 Zach Duggan – Brian Spencer www.master-builders-solutions.basf.us
Manufacturer Product
Silicone Sealant
The Dow Chemical Company DOWSIL 902 RCS 2200 W. Salzburg Rd.
Auburn, MI 48611 Jason Sika Telephone: (989) 496-3833
FAX: (303) 484-6206
BASF Wabo Crete SiliconeSeal System WATSON BOWMAN ACME WaboSF Bridge Seal 95 Pineview Drive Amherst, NY 14228 1-800-677-4922 ext 5458 Cell: 716-316-6022 Fax: 1-716-691-9239 Michael Ferro
Pecora Corporation 165 Wambold Road Pecora 322 FC Faster Cure Harleysville, PA 19438 SiliconeSeal 1-215-799-7557 1-267-816-7720 Glen Murphy
FAX: (215) 721-0286
www.pecora.com
EMSEAL Joint Systems Ltd.
25 Bridle Lane EMSEAL BEJS Westborough, MA 01581 Pecora 301 NS 1-508-836-0280 NOMAD Epoxy Adhesive Philip Benevides
FAX: (508) 836-0281
www.emseal.com/bridge http://www.master-builders-solutions.basf.us/ http://www.pecora.com/ http://www.emseal.com/bridge
SCDOT CONTACT PERSON: Caleb Gunter, PE Structural Materials Engineer SC Department of Transportation PO Box 191 Columbia, SC 29202 Telephone: (803) 737-6694 Email: guntercb@scdot.org mailto:guntercb@scdot.org
| SOUTH CAROLINA DEPARTMENT OF TRANSPORTATION |
| Polymeric Elastomeric Two Component Sealant |
| Silicone Sealant |
File details come from the government source that posted it. Updated .