The file's text, extracted by GovTribe without its formatting.
PRODUCT DESCRIPTION
For
NON-EXPENDABLE EQUIPMENT:
TRANSPORT CHAIRS
Prepared By:
Strategic Acquisition Center Department of Veterans Affairs 10300 Spotsylvania Avenue, Suite 400 Fredericksburg, VA 22408
1. SCOPE OF WORK:
The Veterans Health Administration (VHA) Non-Expendable Equipment National Program has identified the TRANSPORT CHAIRS product line as a candidate for a VA-wide (otherwise referred to as “national”) single Requirements contract award. Patient transport chairs provide mobility assistance throughout a medical facility for patients with walking impairments in order to reduce the risk of falling or further injury. Typically, transport chairs come with companion handles on the backrest to allow the caretaker to easily push a patient forward or to pull them in reverse motion. Unlike average wheelchairs, these specialized transport chairs are designed with smaller wheels to allow a caretaker to safely transport patients from standard to bariatric sizes while reducing personal hazard.
The Contractor must demonstrate the ability to meet all requirements for the solicitation. The objective is to provide transport Chairs to be used by clinicians throughout the VA medical centers and facilities. The period of performance is for one (1) 12-month base period with four (4) twelve-month option periods.
2. REQUIREMENT
This requirement will be IAW FAR clause 52.211-6, “Brand Name or Equal” which requires that the quoter indicate that each product that is being offered as an “equal” product to the PrimeTC® brand of Transport Chair which are manufactured by Stryker Corporation.
The Government's intent for this Requirements contract is to include all ancillary items to ensure the equipment can function as designed by the OEM and as clinically required. The Government may, at its discretion and through bilateral modification, add or remove items to this contract that are determined to be within scope of the solicited product line, not limited to the original items awarded. Additionally, any discontinued items may be replaced via future contract modification by the replacement part identified by the OEM, so long as the replacement part serves the same clinical purpose and function as the originally awarded item. Furthermore, any new technology that is presented during performance of this contract may be evaluated by the Government for inclusion into the contract, via bilateral modification. This new technology must be determined to be within scope of the original contract.
For each equal product, the offeror must include a description reflecting the salient characteristics (SC) and level of quality that will satisfy the salient physical, functional, or performance characteristics of the equal product(s) specified in the solicitation. The quoter must also clearly identify the item by brand name (if any) and make/model number. Finally, the quoter must include descriptive literature, such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the contracting officer, and clearly describe any modifications it plans to make to a product to make it conform to the solicitation requirements.
| CLIN |
| BRAND |
| PART NUMBER |
| DESCRIPTION/ |
| BASE YR |
| OY 1 |
| OY 2 |
| OY 3 |
| OY 4 |
| 0001 |
| Stryker |
| 1460-000-000 |
| Stryker Prime TC Transport Chair |
| 360 |
| 360 |
| 360 |
| 360 |
| 360 |
| 0002 |
| Stryker |
| 1460-035-000 |
| Transport Chair IV Pole |
| 360 |
| 360 |
| 360 |
| 360 |
| 360 |
| 0003 |
| Stryker |
| 1460-101-150 |
| Foley Bag Attachment Hook |
| 360 |
| 360 |
| 360 |
| 360 |
| 360 |
| 0004 |
| Stryker |
| 1460-001-200 |
| Foley Bag Hook options W/ Legrest |
| 360 |
| 360 |
| 360 |
| 360 |
| 360 |
| 0005 |
| Stryker |
| 1460-013-050 |
| Padded Seat |
| 160 |
| 160 |
| 160 |
| 160 |
| 160 |
| 0006 |
| Stryker |
| 1460-145-000 |
| Oxygen Holder |
| 160 |
| 160 |
| 160 |
| 160 |
| 160 |
| 0007 |
| Stryker |
| 1460-166-030 |
| Leg Rest |
| 160 |
| 160 |
| 160 |
| 160 |
| 160 |
| 0008 |
| Stryker |
| 1460-013-100 |
| Lap Belt |
| 160 |
| 160 |
| 160 |
| 160 |
| 160 |
The Department of Veterans Affairs (VA) is seeking vendors who can provide Stryker PrimeTC® Transport Chairs as listed above or equal commodities which meet all of the following salient characteristics. Vendors may quote any product solution or configuration so long as they meet the salient characteristics. Vendors are asked to quote any additional product that may be beneficial. These items must be captured in the vendor’s pricing volume with a quantity of zero (0).
| SC # |
| SALIENT CHARACTERISTICS |
| METHOD OF EVALUATION |
| APPLICABLE CLINS |
| SC LITERATURE MAP |
| SC 1 |
| Must support a minimum Weight capacity of 500 pounds. |
| Literature Review |
| 0001, 0005, 0007, 0008 |
| Stryker: Spec Sheet Page 1 |
Staxi: Brochure Page 1
| SC 2 |
| Must provide Large back wheels which provide maneuverability but do not allow patients to self-propel. |
| Literature Review |
| 0001 |
| Stryker: Spec Sheet Page 1 |
Staxi: Brochure Page 1 -- Visual
| SC 3 |
| Must have adjustable footrests. |
| Literature Review |
| 0001, 0007 |
| Stryker: Spec Sheet Page 2 |
| SC 4 |
| Must have Arm rests that rotate out of the way to allow side access and also have elevated touch points to allow patients to support themselves during ingress and egress with nose-over-toes posture. |
| Literature Review |
| 0001, 0007 |
| Stryker: Brochure Page 2 |
| SC 5 |
| Must have a seat that is easily cleaned and will not tear. |
| Literature Review |
| 0001 |
| Stryker: Spec Sheet Page 2 |
Staxi: Brochure Page 1, and Visual
| SC 6 |
| Must have an attached IV pole. |
| Literature Review |
| 0001 |
| Stryker: Spec Sheet Page 1 |
Staxi: Product Listing Page 1
| SC 7 |
| Must have an attached oxygen holder in upright position. |
| Literature Review |
| 0001, 0005 |
| Stryker: Spec Sheet Page 1 |
| SC 8 |
| Must have the ability to engage and disengage brakes from the back of the chair without leaning. |
| Literature Review |
| 0001, 0002 |
| Stryker: Spec Sheet Page 1 |
| SC 9 |
| Must have anti-tip wheels. |
| Literature Review |
| 0001, 0006 |
| Stryker: Spec Sheet Page 2 |
Staxi: Brochure Page 1
| SC 10 |
| Must have Bag hanging capability to attach foley bags and other hanging equipment. |
| Literature Review |
| 0001 |
| Stryker: Spec Sheet Page 2 |
| SC 11 |
| Must have vertical handles. |
| Literature Review |
| 0001 |
| Stryker: Spec Sheet Page 1 |
Staxi: Brochure Page 1 – Visual
| SC 12 |
| Must have a nesting design. |
| Literature Review |
| 0001 |
| Stryker: Spec Sheet Page 1 |
| SC 13 |
| Must have a power-washable frame for easy cleaning. |
| Literature Review |
| 0001, 0003, 0004 |
| Stryker: Spec Sheet Page 1 & 2 |
Staxi: Brochure Page 1 and Visual
| SC 14 |
| Must have a sitting surface at a height that allows lateral transfer and standing in the usual fashion (21 inches from seat to floor). |
| Literature Review |
| 0001 |
| Stryker: Spec Sheet Page 2 |
Staxi: Brochure Page 1
| SC 15 |
| Must have >=19 inch wide sitting surface. |
| Literature Review |
| 0001 |
| Stryker: Spec Sheet Page 2 |
| SC 16 |
| Warranty must cover 3 years on parts and 1 year for labor and travel. |
| Literature Review |
| 0001 |
| Stryker: Spec Sheet Page 2 |
Staxi: Warranty Sheet image1.png