Attachment B - Specifications - Pages 1-5.docx

DOCX document 35 KB Posted

Attached to
REBID* Kenworth T880 Work Truck
Solicitation number
3000026849
Issued by
East Baton Rouge Parish, Baton Rouge City, Louisiana

About this file

This is a Specifications document (Attachment B) for River Parishes Community College (RPCC) in response to RFx #3000026849, detailing requirements for the procurement of one new 2026 or newer Kenworth T880 work truck with a modified sleeper cab to support the institution's Commercial Driver's License (CDL) Training Program. The vehicle must be factory new and meet all applicable State and Federal safety and emission standards at the time of order. The specifications establish comprehensive requirements across multiple categories, including primary requirements, chassis details, vehicle options, body details, and safety systems. The vendor must demonstrate Louisiana authorized dealer availability with properly trained technicians capable of providing warranty and repair services in accordance with manufacturer requirements, supported by a certification letter submitted with the bid. The unit must be delivered completely assembled and ready for operation, including a completed Louisiana safety inspection with properly affixed inspection sticker, and vendors must perform a test run to verify all features and capabilities are functioning properly at delivery.

Documentation required with delivery includes a notarized Bill of Sale, Certificate of Origin, Dealer's Service Policy, Owner's/Operator's Manual in both hardcopy and digital formats (CD, DVD, Flash Drive, or email), Service Manual in both hardcopy and digital formats, and Build Sheets in plain language format detailing all standard and optional features. Bidders must complete the specification document in full and submit it with their bid response, noting all exceptions or deviations on the designated "Bidder's Exceptions" page; exceptions deemed less than minimum requirements will not be accepted. Any additions, deletions, or variations from manufacturer standard specifications must be clearly identified, and vendors must specify any installations to be performed by the vendor rather than the manufacturer. The number of delivery days after receipt of order may be considered as a factor in award determination, and invoices will not be processed for payment until RPCC, represented by LPAA, inspects the unit and deems it in compliance with all specifications.

View the file

Other files

File Type Posted
3000026849.pdf PDF
Attachment A - Special Terms and Conditions - Pages 1-9.docx DOCX document
Attachment C - Online Bidding Instructions - Pages 1-10.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Attachment B – Specifications RFx #3000026849

River Parishes Community College (RPCC)

General:

This specification sets forth the minimum requirements for one new Kenworth T880 Work Truck with a modified Sleeper cab.

Equipment shall be a new a 2026 or newer Kenworth T880 Highway Tractor Highway Tractor with modified Sleeper Cab to support the RPCC’s Commercial Driver's License (CDL) Training Program. The vehicle shall be factory new and must meet all State and Federal safety and emission standards in effect at the time of order.

Louisiana Authorized Dealer(s):

The proposed item must be from a manufacturer who has at least one authorized dealer within the State of Louisiana where parts and service can be obtained. Authorized dealer(s) must have properly trained technicians plus all other resources necessary to perform warranty and repair services in complete accordance with the manufacturer's requirements. A letter certifying the ability to meet this requirement, Inclusive of the company name(s) and address(es) of the Louisiana authorized dealer(s), should be supplied with the bid submittal and may be required prior to award.

Delivery & Acceptance:

The vendor shall perform a test run of the unit to verify that all features and capabilities are operating properly at the time of delivery. Documentation of testing may be required prior to acceptance by RPCC.

The unit must be delivered completely assembled (including all components, accessories, etc.) and ready for operation without any additional preparation, including, but not limited to, ensuring all fluid levels are at their full mark, fuel tank(s) are full, and all necessary lubrication has been performed. etc. A Louisiana safety inspection shall be performed on the vehicle prior to delivery, and a Louisiana safety Inspection sticker properly affixed.

Any unit delivered under this specification is subject to rejection if there is evidence of poor workmanship by either the vendor or the original manufacturer. Noted defects and/or nonconformance findings may be corrected by the vendor. Corrections must be completed and approved by RPCC, represented by LPAA prior to final acceptance.

Unit shall be delivered ''on the ground”, RPCC, represented by LPAA, will not unload nor provide any unloading equipment to the vendor/delivery driver in order to offload the unit.

Each unit must be supplied with the following documentation:

1. Notarized Bill of Sale

2. Certificate of Origin (MSO)

3. Dealer's Service Policy

4. Owner's/Operator's Manual (s)

a. One Hardcopy

b. One Digital Copy I. Acceptable Formats: CD, DVD, Flash Drive, or E-mail

5. Service Manual(s)

a. One Hardcopy

b. One Digital Copy I. Acceptable Formats: CD, DVD, Flash Drive, or E-mail

6. Build Sheet(s)- as applicable

a. One Hardcopy

b. Build sheets should be written in plain language (not company-specific codes) and include. at a minimum, all standard & optional features of the delivered unit.

Note: Invoices will not be processed for payment until the unit has been inspected by RPCC, represented by LPAA and deemed in compliance with the specifications.

Bid Submittals:

Any additions. deletions, or variations from the specifications should be noted in the "Bidder's Exceptions" page of this specification. Exceptions that are noted to be less than a minimum requirement will not be accepted.

Any additions, deletions, or variations from the manufacturer's standard published specifications should be noted on the Bidder’s Exceptions" page of this specification. Unless otherwise noted. Any items appearing in the manufacturer's standard published specifications furnished by the Bidder are assumed to be included in the Bidder's submittal.

Bidder should note on their submittal any installation(s) to the equipment that will be performed by the vendor instead of the manufacturer.

Failure to note any specification exceptions or manufacturer specification alterations and vendor installations prior to award may result in rejection of the equipment at the time of delivery.

The number of delivery days after receipt of order (ARO) may be used as a factor in the award.

Notice to Bidders:

Bidders should review the detailed "Equipment Specification" completely and respond to the compliance question at the end of each section by marking "X" in the space provided for "Yes" or "No". Mark "Yes" to indicate that the equipment bid meets the section exactly as specified. Mark "No" if there are exceptions to any part of that section. Exceptions/deviations to any part of the specification are to be detailed on the "Bidder's Exceptions" page of this specification.

To be considered for the award, the bidder should return this specification completed in full. with their bid submittal.

Note: All Values listed below are minimums unless noted otherwise.

A. Primary Requirements:

1. 2026 Kenworth T880 Tractor

2. Standard sleeper cabin to be converted into a seating area for up to four people

3. Two-Seat front capacity

4. Digital instrument panel

5. PACCAR MX-13 Engine with Automated transmission

6. ABS and traction control

7. Seating should be individual bucket seating with seat belt

Comply: Yes: ___ No: ___

B. Chassis Details:

1. Stock Type: New

2. Year: 2026

3. Make: Kenworth

4. Model: T880

5. Fuel: Diesel

6. Exhaust Type: Dual

7. Vehicle Trim: Base

8. Interior: Vinyl/Cloth

9. Exterior Color Description: Oxford White

10. Sleeper Type: Mid Roof Sleeper 5211 minimum

11. Transmission Type: Automated

12. Engine Model: MX-13

13. Horsepower: 455-51O

14. Suspension: AG 400

Comply: Yes: ___ No: ___

C. Vehicle Options:

1. Digital Cluster

2. Navigation

3. Dash Cams

4. Radio: AM/FM Stereo with clock display and two speakers

5. USB Ports and device mounts

Comply: Yes: ___ No: ___

D. Body Details:

1. Minimum 52” Sleeper

2. Dual Air Ride Seats

3. Instructor Seat with enhanced visibility

4. Premium Insulation

5. Seating in Sleeper Cabin for four students

Comply: Yes: ___ No: ___

E. Safety Systems:

1. Collision Mitigation

2. Adaptive Cruise

3. Automatic Emergency Braking

4. Lane Departure

5. Electronic Stability Control

6. Cameras

7. Blind Spot Monitoring

Comply: Yes: ___ No: ___

Bidder's Exceptions:

Instructions:

The bidder should note all exceptions in space provided below. Responses may be typed or handwritten. Handwritten responses must be legible. If additional space is needed, please print a duplicate copy of this sheet. "Bidder's Exceptions" page(s) should be returned with the bid submittal.

Exceptions:

File details come from the government source that posted it. Updated .