Attachment B - Specifications - Pages 1-2 Revised per Addendum.pdf

PDF 112 KB Posted

Attached to
Aluminum - DOC-PE - Addendum No. 1 - Vendor's Questions and State's Responses Date Issued:
Solicitation number
3000026832
Issued by
East Baton Rouge Parish, Baton Rouge City, Louisiana

About this file

Summary

This is a specifications document (Attachment B, Revised per Addendum No. 1 dated November 10, 2026) for aluminum sheeting material procured by the State of Louisiana, Office of State Procurement, for the Louisiana State Penitentiary's Prison Enterprises-LSP Tag Plant under Solicitation RFx No. 3000026832. The solicitation requests 80,000 pounds of conversion-coated aluminum substrate for the manufacture of reflectorized multi-year motor vehicle license plates, to be delivered in two shipments of 40,000 pounds each, approximately one week apart. The first delivery must arrive within 21 days of purchase award, with the second delivery one week thereafter. Bids were due November 17, 2026 at 10:00 a.m. CST. The material specifications include 0.027-inch thickness (±0.015 inches) and 12.125-inch width, with aluminum alloy/temper grades of 8112-H111, 7069-H111, or 3105-H21. The aluminum must meet mechanical properties including ultimate tensile strength of 17,000 to 23,000 KSI, minimum yield strength of 11,500 KSI, and minimum elongation of 16 percent, and must withstand embossing without breaking or warping.

The material must be supplied with either a chromate conversion coating applied per ASTM B-449 (10 to 35 mg/sq ft) or a chrome-free conversion coating per BetzDearborn Permatreat 1021B (8 to 12 mg/sq ft, with 10 mg/sq ft optimal). Bidders proposing chrome-free coatings must provide certification from 3M, the current sheeting supplier, confirming compatibility with 3M sheeting; chromate coating bids require no additional documentation. Coils shall be wound to approximately 2,000 pounds nominal weight on 18- to 20-inch inside diameter cores with 48- to 58-inch outer diameter, packaged on pallets with reinforced waterproof paper, and delivered via open flatbed trailer for fork truck unloading. Deliveries are accepted Monday through Friday, 8:00 a.m. to 2:00 p.m., excluding holidays, with 24-hour advance notice required. The State reserves the right to reject vendors unable to meet the 21-day delivery requirement. Awards are made to the lowest responsive, responsible bidder meeting all specifications, with payment due within 30 days of invoice receipt or delivery, whichever is later.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Attachment B – Specifications (Revised per Addendum No.1, dated 11/10/2026) Title: Aluminum – DOC-PE

RFx No.: 3000026832

Line Item No. 1: Aluminum: .027” x 12.125”

Conversion coated aluminum for Motor Vehicle License Plates

General Specifications:

A. Coils of Aluminum substrate shall be wound to a nominal weight of 2,000 lbs.

The coils shall have 18'' to 20" inside diameter cores with an O.D. of 48" to 58" and shall be packaged on individual skids with a total weight of no more than 2,000 lbs. No more than 10% undersized in weight will be accepted.

B. Coils shall be packaged on a pallet. They shall be packaged and wrapped with reinforced waterproof paper (no tar paper) sufficiently to insure protection against environmental hazards. Pallets should allow 4" clearance for pallet truck and have 4" X 4" parallel runners at 28". Pallet coils may be double stacked for shipping and storage.

C. Each coil shall be securely banded around and through the eye of the coil to prevent telescoping.

D. Coils shall be free from edge damage caused by cable marks, forklifts, dull cutting dies, rough separator discs, or other causes that result in rough, wavy, or damaged edges. Coils shall be coiled straight and fairly tight with no more than 1/16” interweave.

E. Printed on tag attached to each or on a tape used to tie the coil, shall be the name of the producer that performed final processing or finishing operation prior to making the product along with the applicable lot number and net weight of the coil.

Purpose and Scope:

It is the purpose of these specifications to define a conversion coated aluminum substrate material suitable in the manufacture of reflectorizes multi-year Motor Vehicle License Plates.

The Aluminum must be produced to the following properties:

A. Alloy Temper: 8112-H111, 7069-H111, or 3105-H21 B. Thickness: .027 (+/- .015”) C. Width (standard size): 12-1/8” + 1/32” – 0 D. Ultimate Strength: 17,000 to 23,000 KSI E. Minimum Yield Strength: 11,500 KSI F. Elongation of 2” Standard Specimen: Minimum 16% (20% nominal) G. Quality: To withstand embossing with all-steel dies at 3/32” height without breaking, cutting or appreciable plate warping.

H. Front Surface Finish and Backside Preparation:

Coating: Sheeting to be treated with a light, tightly adherent, chromate conversion coating or chrome free coating, *Approved & Certified by State’s Sheeting Supplier*(see below) applied in accordance with ASTM B- 449 for chromate conversion or BetzDearborn Permatreat 1021 B for chrome free conversion, and free of any powdery residue, oil or other foreign material that may affect adhesion of reflective sheeting. Chromate coating weight shall be 10 to 35 mg/sq ft. Chrome free conversion coating weight will be 8 to 12 mg/sq ft with a median of 10 mg/sq ft as optimum.

Estimated shelf on all above: 6 months

*If bidding aluminum with a chrome-free conversion coating, the Successful Bidder must supply a letter from 3M (the current sheeting supplier), stating that their aluminum will work with 3M’s sheeting.

If bidding aluminum with a chromate conversion coating, then no further documentation will be required.

Shipping:

A. Shipment must arrive by open flatbed trailer for side off-loading by fork truck.

B. Buyer to unload at destination.

C. Buyer to be notified at least 24 hours prior to arrival of shipments. Deliveries accepted.

Monday thru Friday, 8:00am to 2:00pm, except holidays. Contact PE Tag Plant at (225) 655- 4411.

D. Two deliveries, approximately one week apart: 1st delivery of 40,000 lb. should be within 21 days of the date the purchase is awarded (ARO), the second shipment of 40,000 lb. should be 1 week later.

Packing:

Packing slip/invoice must accompany each shipment. Items are to be packed so as not to be damaged in any way.

Agency will not accept damaged material.

File details come from the government source that posted it. Updated .