Attachment B - Specifications.pdf

Requirements / Specification Document

TITLE: High-Frequency Oscilloscope

Requesting Laboratory / Division / Group:

Communications Technology Laboratory Spectrum Technology and Research Division Shared Spectrum Metrology Group (675.03)

General Statement of Need:

The Shared Spectrum Metrology (SSM) group is looking to procure a high sampling rate, wide bandwidth oscilloscope to conduct time-domain measurement of LTE and 5G signals.

Item Specifications and Quantities:

Item 1: High-Frequency Oscilloscope Quantity: 1 EACH Specifications: 1.1 Minimum sample rate of 12.0 GS/s per channel for the minimum of two channels.

1.2 Minimum frequency range of DC to 6 GHz, but not to exceed

8 GHz.

1.3 RMS noise floor shall not exceed 350 uV at 2 mV/div.

1.4 Dynamic range in excess of 106 dB. The dynamic range is

defined as the ratio between the largest and the smallest measurable values of the signal voltage.

1.5 Memory depth in excess of 200 Mpoints at 12.0 GS/s.

1.6 Display screen on the front-panel user interface.

1.7 Powered by 120V-60Hz single phase AC.

Maximum: 15 Amps.

1.8 Have capability to be automated using SCPI commands via

USB and/or Ethernet ports.

1.9 Only new equipment that is still in production and supported by the manufacturer shall be offered.

Procurement Support Information and Ancillary Services:

Section Requirements/Specifications

Planning Considerations ☒ N/A

☐ List any visits required to allow potential vendors to see site specific constraints.

[Explain Requirements.] ☐ US citizens are required on-site (foreign nationals require pre-registration 30 days prior to visit.)

☐ Vendor Representative On-Site more than three (3) days.

☐ Other Considerations:

[List other considerations to ensure an accurate quote.]

Shipping & Delivery ☐ N/A

Shipping Address:

☒ NIST-Boulder

Mail Stop: 675.03 325 Broadway Boulder, CO 80305

☐ [Alternate Shipping Address] Shipping Criteria:

☒ Partial Delivery Acceptable

☐ [Enter Shipping and Delivery information by item.] ☐ Direct Delivery to OU Building Required [Explain Need for Requirement]

Building /Room Number: [Enter Building/Room Number] ☐ Building has Loading Dock

Containerization Preference: [Enter Container Type] Other Requirements:

[List Any Other Requirement] Delivery Date Criteria:

☐ Delivery Shall Be Competed No Later Than:

Click or tap to enter a date.

☒ Delivery Shall Be Made No Earlier Than:

60 Days After Release of Order (ARO) ☐ Scheduled Deliveries:

Item Number Due Date

☒ Other:

Electronic Media ☐ N/A

[Enter Electronic Media Requirements by Item.]

☐ Software ☒ Electronic Manuals ☒ License Key, PERPETUAL ☐ Other:

[List Any Other Electronic Media Requirements]

☐ US Government Email Address for Software Delivery:

[Enter Address]

Installation ☒ N/A

[Enter Installation Requirements by Item]

☐ Vendor Technician on Site ☐ Rigging ☐ Uncrating / Unpackaging ☐ Removal of Packaging Material ☐ Equipment Set Up ☐ Start-Up Services ☐ Turnkey Installation ☐ Other:

[Enter Details] NOTE: SME shall be the coordination POC.

Facility / Utility Considerations ☒ N/A

[List Site Specific Utility Considerations by Item] ☐ OFPM Work Order Numbers

[List Work Order Numbers]

☐ Power Available

Voltage: [Enter voltage] (V) Maximum Current: [Enter max current draw] (A) Phase: [Choose Phase]

Frequency: [Typically 60Hz] (Hz) NEMA Plug Type: [Enter Plug Type] (i.e.: NEMA L5-20P) Environment: [Choose Environment] Other Power Considerations:

[List Any Other Power Considerations.]

☐ Utility Connections:

[List Relevant Available Utilities, Pressure(s) and Flowrate(s).]

☐ Other Considerations:

[List Other Considerations to Ensure an Accurate Quote.]

Inspection and Acceptance ☐ N/A

[Inspection Requirements Per Item (Who, When, What, Where)] ☐ On-Site

☒ Acceptance Not Expected to Exceed 7 Business Days

☐ Acceptance Expected to Exceed 7 Business Days:

[30 Business Days]

☐ Inspection and Acceptance Plan:

[Explanation]

[Enter Other Requirements]

Training

Training Requirements (Who, When, What, Where)

☐ Number of Trainees: [Enter Number of Trainees] ☐ On-Site

☐ Off-Site Location: [Enter Location(s)] Is Trainee Travel Required: [Choose Answer] Scope of Training ☐ Operation ☐ Maintenance ☐ Troubleshooting

☐ Safety ☐ Other [Enter Other Scope of Training Requirements] ☐ Training Materials to be Provided by Government:

[Describe Materials] ☐ Training Materials to be Provided by Vendor:

[Describe Materials] ☐ Other [Enter Other Training Requirements] NOTE: SME shall be coordination POC.

Warranty

Extended Warranty Required Warranty Length: 3-Years What is included?

☒ Labor ☒ Parts ☐ Travel ☐ Cost and Liability for Returns

☐ Other

☐ 1 Option Period ☐ 2 Option Periods ☐ 3 Option Periods ☐ 4 Option Periods (Maximum)

Calibration

[Describe Calibration Requirements Per Item] Calibration Plan Length: 3 - Years What is Included?

☒ Labor ☒ Spare Parts ☐ Consumables

☐ Travel ☐ Cost and Liability for Shipment ☒ Software Updates ☐ Manuals

☒ Other Annual Calibration ☐ Requirements:

[Enter Requirements] (i.e.: On-Site Within 72 hours, etc.)

☐ 1 Option Period

Length: [i.e. 1 – Year / 6 - Months] ☐ 2 Option Periods

Maintenance

[Describe Maintenance Requirements Per Item] Maintenance Plan Length: [i.e. 3 - Years] What is Included?

☐ Labor ☐ Spare Parts ☐ Consumables

☐ Travel ☐ Cost and Liability for Shipment ☐ Software Updates ☐ Manuals

☐ Other [Enter Other Requirements] ☐ Requirements:

[Enter Requirements] (i.e.: On-Site Within 72 hours, etc.)

☐ 1 Option Period

Length: [i.e. 1 – Year / 6 - Months] ☐ 2 Option Periods

Government Furnished Material / Equipment ☒ N/A

List Any Government Furnished Material / Equipment Per Item] ☐ Samples for Testing

☐ Equipment which will leave Government Site

Description:

Serial Number:

NIST Property Number:

[Enter Description] [Enter Serial Number] [Enter NIST Property Number]

☐ Other: [Enter Other Details]

Travel

[Describe any Travel Requirements Per Item] ☐ Explain:

[Enter Justification / Requirement]

NOTE TO VENDOR: To the maximum extent possible, include travel requirement estimates as part of pertinent sections above (Installation, Maintenance, Repair, etc.). Otherwise, Travel will be a separate line item, reimbursable per the Federal Travel Regulation.