Attachment B - Specifications.docx

12569R20Q0036 Vibratory Hammer/Sheet Pile Driver Attachment B – Specifications

Excavator Mounted Hydraulic Sheet Pile Driver Installed on a Volvo EC160CL.

Excavator SN: VCEC160CP00120775.

L2666 Quick Attach Mounting Installation Kit installed on Hydraulic Pile Driver.

Mounting Type: Dedicated Quick Attach.

Driver Configuration: 180 Degree Swivel.

Low Flow Pressure Kit to be installed on EC160CL by seller/installer.

Freight to Seller/Installer Included.

Must be installed by seller within 150 miles of Laona, WI.

Seller must be able to provide on-site service to Laona, WI.

Specifications •Minimum of 180° free rotation which allows precise alignment and positioning of sheet pile without having to reposition the machine. When not needed, the swivel can be locked in place; either parallel or perpendicular to the boom.

•Dedicated top mounting brackets designed to OEM bucket specifications to provide a full range of motion for positioning to pick up/remove the sheet from the ground.

•Hydraulic cylinder lock for positive pile clamping to prevent slippage.

•Rubber shock mounts to isolate vibration and reduce noise.

•Heavy duty, high efficiency gear motor.

•Integrated flow control and pressure relieving valves protect the hydraulic motor from excessive flow and pressure.

•Oil splash lubrication of the compactor bearings.

· Minimum Impulse Force 16,000 lbf

· Minimum Chuck Opening 1.5 in

· Minimum Chuck Oil Flow 3-5 gpm

· Minimum Chuck Pressure 3045 psi

· Minimum Cycles Per Minute 2200

· Minimum Oil Flow 33 gpm

· Minimum Operating Pressure 1800-2300 psi

· Height 48-70 Inches

· Width 20 – 30 inches