Attachment B - Rigid Vinyl Sheet Spec_Redacted.pdf

This document is a product specification sheet for Rigid Vinyl Sheet wall protection systems manufactured by IPC Door + Wall Protection Systems. The product provides durable, long-lasting wall protection that is scratch and stain resistant.

The Rigid Vinyl Sheet is available in standard widths of 3 feet (0.91m) and 4 feet (1.22m) with lengths of 8 feet (2.44m), with custom lengths and rolls up to 120 feet (36m) available upon request. Standard thicknesses are 0.040 inches (1mm) and 0.060 inches (1.5mm), with 0.080 inches (2mm) thickness also available. The product includes vinyl, aluminum, and stainless steel trim accessories. The sheets feature a velvet texture finish and come in various color options with matched vinyl seals. The system components include top caps, vertical divider bars, inside and outside corners, and butt joint seals designed for seamless installation. For 0.080-inch thick sheets, alternative components (418 Vertical Divider Bar, 419 Inside Corner, and 417 Top Cap) are specified.

The material meets rigorous environmental standards, including GREENGUARD certification for chemical emissions, California low-emitting product requirements tested by Air Quality Sciences, and GREENGUARD Children & School chemical emissions levels. Installation requires a dry, clean substrate free from dirt, grease, and loose joints, with recommended adhesives including XT-2000+A (pressure-sensitive) and Fastbond 30.0 (contact adhesive), allowing approximately 20 minutes working time before firming. The product is manufactured by IPC Corporation, headquartered in Muskego, Wisconsin.