Attachment B_Item Purchase Descriptions .pdf

PDF 548 KB Posted

Attached to
Request for Information (RFI) Wrist Watch
Solicitation number
47QSSC26Q0043
Issued by

About this file

This document is an Item Purchase Description (IPD) attachment containing detailed specifications for wrist watches and related timing devices procured by the General Services Administration (GSA). The IPD lists 59 distinct National Stock Numbers (NSNs) covering multiple watch categories: analog wrist watches (mechanical and quartz-based), digital stopwatches, chronometers, and watch bracelets. Products span military applications including pilot watches, navigator watches, diver's watches, and search-and-rescue timepieces, with specific designations per MIL-PRF-46374 standards. Case materials include stainless steel (316L), composite fibershell, and high-impact plastic; movements range from manual mechanical to high-torque quartz; and water resistance specifications vary from 3 ATM (30 meters) to 30 ATM (300 meters). Many items feature tritium-based luminous components requiring U.S. NRC licensing compliance per 10 CFR 32.22, with activity levels between 26-30 millicuries and specific engraving requirements for back markings including NSN, contract number, CAGE code, and serial number for traceability.

The document specifies uniform packaging and marking requirements across all NSNs, including compliance with ASTM D3951 for commercial packaging, FED-STD-123H for civilian destinations, and MIL-STD-129R for military destinations with barcode marking mandatory for both. FAR clause 52.211-6 (Brand Name or Equal) applies to multiple items, requiring bidders to furnish detailed product comparison literature addressing each specification characteristic. Procurement preference is directed toward items with highest post-consumer recycled material content within reasonable cost per FAR 23.403, and energy-efficient products per FAR 23.203 where applicable. Warranty periods range from one to three years depending on the specific NSN and product type. All items are individually described with comprehensive technical parameters including case diameter, thickness, crystal type, hand quantity, graduation units, accuracy specifications, and environmental protection ratings (water-resistant, dust-proof, antimagnetic, shockproof, corrosion-resistant).

View the file

Other files

File Type Posted
Attachment A_Wrist Watch NSN.xlsx XLSX spreadsheet

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

ITEM PURCHASE DESCRIPTION

General Services Administration

6645-00-066-4279 Ver: 21 UI: EA Status: Active AAC: H

WATCH, WRIST

NSN Description:

ITEM NAME WRIST, WATCH

I.A.W. MIL-PRF-46374

TYPE: I - ANALOG, SHORT LIFE (2 YEARS), NON-

MAINTAINABLE, ANTIMAGNETIC, WATER-RESISTANT

CLASS: 4 - MECHANICAL MOVEMENT, BATTERY NOT

REQUIRED

OVERALL CASE DI AMETER 34.00 MM

OVERALL CASE THICKNESS 12.00 MM

UNIT TYPE GENERAL PURPOSE MECHANICAL

MINIMUM JEWEL QUANTITY 17

MINIMUM RUNNING TIME 39 HOURS

MINIMUM ACCURACY +/- 30 SECONDS / DAY

BACKGROUND COLOR BLACK

STEEL INSCRIPTION COLO R WHITE

MAJOR GRADUATION COLOR GREEN (TRITIUM TUBE)

MINOR GRADUATION COLOR WHITE

STRAP COLOR BLACK, SAGE GREEN OR DESERT TAN

STRAP MATERIAL NYLON

STRAP WIDTH SIZE 16 MM

CASE MATERIAL CORROSION RESISTANT STEEL OR HIGH IMPACT

FIBERSHELL; 316L STAINLESS STEEL BACK

CRYSTAL TYPE 3MM THICK SAPHIRE

MOVEMENT TYPE MECHANICAL ANALOG (MANUAL)

AND SELF-WINDING (AUTOMATIC)

SURFACE LUSTER LUSTERLESS

NON-MAGNETIC YES

GRADUATION UNIT 1.000 SECOND OR 1.000 HOUR

SCALE QUANTITY 2

HAND QUANTITY 3

HAND DESIGNATION SECOND HAND, MINUTE HAND AND HOUR HAND

HAND TYPE ALL THREE HANDS ARE SWEEP TYPE

HANDS COLOR GREEN (2 TRITIUM TUBES) AND W HITE (1)

SCALE RANGE 0.0 / 12.0 HOUR AND 13.0 / 24.0 HOUR

SCALE NAME STANDARD TIME AND SUPPLEMENTAL MILITARY TIME

LUMINOUS HANDS INCLUDED

LUMINOUS NUMERAL INCLUDED

LUMINOUS FEATURES TRITIUM GAS TUBES

Printed on: 05/11/2026 Page 1

STEM CAP PROVIDED

WATE R RESISTANCE 30 METERS (3 ATM)

SIZE 0.93 INCHES MINIMUM - 1.02 INCHES MAXIMUM

SPECIAL FEATURE LUMINOUS HOUR, MINUTE HANDS AND HOUR MARKINGS ARE

POWERED BY TRITIUM GAS FILLED TUBES (ACTIVITY

BETWEEN 26 AND 30 MILLICURIES). MANUFACTURER MUST

MEET U.S. NRC LICENSE REQUIREMENTS (10 CFR 32.22).

MARKINGS ON BACK MUST BE ENGRAVED WITH:

NOMENCLATURE, NSN, NUMBER OF MILLICURIES, NRC

LICENSE NO., CONTRACT NO., CAGE CODE, DATE OF

PRODUCTIO N, SERIAL NO. FOR TRACEABILITY AND

MAINTENANCE.

ENVIRONMENTAL PROTECTIONCORROSION AND WATERPROOF RESISTANT;WATERPROOF

AND DUSTPROOF CASE

[SDS Flag]

KEY FIELDS:

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

F or additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

MARKING

In addition, supplier shall provide MSDS in accordance with Fed-Std-313D, dated April 3, 1996, and Change Notice 1, dated March 21, 2000.

Printed on: 05/11/2026 Page 2

MSDS - Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities.

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulat ions applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufac tured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE.

PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL

CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

Th e Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

QUALITY ASSURANCE

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

Printed on: 05/11/2026 Page 3

6645-00-126-0286 Ver: 1 UI: EA Status: Active AAC: H

STOPWATCH

NSN Description:

ITEM NAME STOPWATCH

I.A.W. MARATHON WATCH CO. PN ST194003 OR EQUAL COMMERCIAL

OUTSIDE DIAL DIAMETER 2.050 INCHES

OVERALL DIAMETER 2.500 INCHES

OVERALL THICKNESS 0.625 INCHES

GRADUATION UNIT 1.00 MINUTE AND 0.20 (1/5) SECOND

BACKGROUND COLOR BLACK AND WHITE

MINOR GRADUATION COLOR BLACK

MAJOR GRADUATION COLOR WHITE

CASE MATERIAL PLASTIC

SCALE NAME MINUTE AND SECOND

SCALE QUANTITY 2

SCALE RANGE +0.00 / +60.00 M INUTE AND +0.00/ +60.00 SECOND

MAXIMUM RUNNING TIME 8 HOURS

SUBMERSIBILITY NONSUBMERSIBLE

SCALE QUANTITY 2

SWEEP HAND QUANTITY 2

JEWEL QUANTITY 7

WINDING DEVICE LOCATION TOP

WINDING METHOD STEM

CONTROL METHOD STEM PUSH BUTTON

MOVEMENT TYPE NONCONTINUOUS RUNNING

ESCAPEMENT TYPE LEVER

FACE TYPE OPEN POCKET

CRYSTAL TYPE ANY ACCEPTABLE

MOVEMENT SIZE DESIGNATION ANY ACCEPTABLE

ENVIRONMENTAL PROTECTIONNON-MAGNETIC, SHOCKPROOF AND WATERPROOF PLAY SIZE

STANDARD

ACCURACY ACCURATE WITHIN 0.03 PERCENT AT 25 DEGREES

CELSIUS

DIGITAL DISPLAY TYPE HOUR, MINUTE, SECOND AND 1/100TH SECONDS

CONTROLS TIME-OUT MODE, TWO SEPARATE CONTROLS FOR

START / STO P AND RESET; SINGLE ACTION

CONTROL METHOD CROWN OR PUSH-PIECE AND MOVING SIDE SLIDE

BUTTON TYPE STANDARD GRIP BUTTONS

FIT TYPE MADE TO FIT IN PALM OF HAND

CRYSTAL TYPE ANY ACCEPTABLE

Printed on: 05/11/2026 Page 4

MOVEMENT SIZE DESIGNATION ANY ACCEPTABLE

POWER SOURCE ONE OR TWO COMMERCIALLY AVAILABLE BATTERIES

TIME DISPLAY LIQUID CRYSTAL

CASE AND INNER WORKINGS QUALITY AND STRENGTH / DURABILITY MADE TO

LAST MINIMUM OF TWO YEARS OR NORMAL USE

WARRANTY WARRANTED BY CONT RACTOR FOR PARTS AND

LABOR FOR TWO YEARS FROM DATE OF DELIVERY

TO GOVERNMENT

ENVIRONMENTAL PROTECTION NON-MAGNETIC, SHOCKPROOF AND WATERPROOF

[Brand Equal] Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

FAR Provisions 52.211-6, Brand Name or Equal Applies.

In order for the government to make an "or equal" determination of the offered product(s), the Bidder/Vendor must furnish information that specifically addresses each characteristic within the item purchase description. The unit of issue, unit of measure, test methods and results, if required, must also be included. Failure to furnish this information/literature will result in the bid being rejected as non-responsive and will not be considered for award. (see FAR clause 52.211-6).

KEY FIELDS:

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

F or additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

Printed on: 05/11/2026 Page 5

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulat ions applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufac tured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE.

PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL

CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

Th e Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

QUALITY ASSURANCE

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, Printed on: 05/11/2026 Page 6

6645-00-250-4680 Ver: 19 UI: EA Status: Active AAC: H

STOPWATCH

NSN Description:

ITEM NAME STOPWATCH

DIAMETER SIZE 2.00 INCHES

OVERALL THICKNESS 0.50 INCHES

MINIMUM JEWEL QUANTITY 7

MAXIMUM BASIS WEIGHT 1 POUND

GRADUATION UNIT 1.00 MINUTE AND 0.200 (1/5) SECOND

TOTAL READER TIME 30 MIN UTES

SCALE NAME MINUTE TOTALIZING AND SECONDS

SCALE QUANTITY 2

SCALE RANGE +0.00 / +30.00 MINUTE AND +0.00/ +60.00 SECOND

TOTALIZER DIAL RANGE +0.00 / +30.00 IN MINUTES

SWEEP HAND QUANTITY 1

MO VEMENT SIZE DESIGNATION 16

CASE MATERIAL ANY ACCEPTABLE

CASE SURFACE TREATMENT ANY ACCEPTABLE

JEWEL TYPE NATURAL OR SYNTHETIC SAPPHIRE, RUBY OR GARNET

WATCH TYPE SINGLE ACTION

BEZEL TYPE ANY ACCEPTABLE

CRYSTAL TYPE ANY ACCEPTABLE

FACE TYPE OPEN POCKET

OVERALL BACKGROUND COLOR WHITE

OVERALL CRYSTAL COLOR CLEAR, UNCOLORED

INSCRIPTION COLOR ANY ACCEPTABLE

MAJOR GRADUATION COLOR ANY ACCEPTABLE

MINOR GRADUATION COLOR ANY ACCEPTABLE

DIAL BACKGROUND COLOR WHITE ENAMEL

DIAL NUMERAL COLOR BLACK

DIAL SCALE MARKING COLOR ANY ACCEPTABLE

DIAL SCALE MARKING LUMINOSITY NON-LUMINOUS

SEPARATE TOTALIZER DIAL INCL UDED

WINDING METHOD STEM

STEM OPERATION CONSECUTIVE CROWN DEPRESSIONS FOR STOP, START AND

RETURN TO ZERO

MOVEMENT TYPE CONTINUOUS RUNNING

NON-MAGNETIC CHARACTERISTIC INCLUDED

ESCAPEMENT TYPE ANY ACCEPTABLE

SUBMERSIBILITY NON-SUBMERSIBLE

SHOCKPROOF FEATURE INCLUDED

Printed on: 05/11/2026 Page 7

WATER RESISTANT FEATURE INCLUDED

STRIKING MECHANISM NOT INCLUDED

CIVIL DATE INDICATOR NOT INCLUDED

LUMINOUS DIAL NOT IN CLUDED

LUMINOUS HAND NOT INCLUDED

LUMINOUS NUMERAL NOT INCLUDED

SPECIAL FEATURE USED FOR LABORATORIES AND GEOLOGICAL SURVEYS

IN AREAS OF HIGH HUMIDITY AND DUST

ENVIRONMENTAL PROTECTIONDUST, WATER, ANIT-MAGNE TIC, SHOCK, CORROSION AND

EROSION RESISTANT CAUSED BY ACIDS

KEY FIELDS:

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

F or additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulat ions applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufac tured Wood

Printed on: 05/11/2026 Page 8

Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE.

PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL

CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

Th e Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

QUALITY ASSURANCE

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, Printed on: 05/11/2026 Page 9

6645-01-067-0780 Ver: 1 UI: EA Status: Active AAC: H

CHRONOMETER

NSN Description:

ITEM NAME CHRONOMETER

I.A.W. MARATHON WATCH P/N CL194001

OVERALL WIDTH 7.20 INCHES

OVERALL LENGTH 7.20 INCHES

OVERALL HEIGHT 6.50 INCHES

OVERALL MATERIAL PLASTIC CASE

POWER SOURCE ONE (1) AA BATTERY

CRYSTAL TYPE GLASS OR PLASTIC

MOVEMENT TYPE CONTINUOUS RUNNING

DIAL TYPE THREE (3) CONCENTRIC HANDS

TIME TYPE MEAN SOLAR

MOUNTING METHOD PADDED CASE

NONMAGNETIC CHARACTERISTIC INCLUDED

CARRYING CASE INCLUDED

SHOCKPROOF FEATURE INC LUDED

WATERPROOF FEATURE INCLUDED

SPECIAL FEATURES DESIGNED FOR DIGITAL READ-OUT

KEY FIELDS:

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

F or additional references, see below link:

Printed on: 05/11/2026 Page 10

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulat ions applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufac tured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE.

PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL

CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

Th e Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

QUALITY ASSURANCE

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, Printed on: 05/11/2026 Page 11

6645-01-106-4302 Ver: 17 UI: EA Status: Active AAC: H

STOPWATCH

NSN Description:

ITEM NAME STOPWATCH

LENGTH OF NYLON LANYARD 46.00 INCHES

OPERATING TEMPERATURE 14.00 DEGREES F TO 122.0 DEGREES F

OVERALL HIGH TEMP RELATIVE HUMIDITY 50.00 PERCENT (+/- 20 PERCENT)

SCALE QUANTITY 3

UNIT TYPE DIGITAL DISPLAY SIZE STANDARD

ACCURACY ACCURATE WITHIN 0.03 PERCENT AT 25 DEGREES

CELSIUS

DIGITAL DISPLAY TYPE HOUR, MINUTE, SECOND AND 1/100TH SECONDS

CONTROLS TIME-OUT MODE, TWO SEPARATE CONTROLS FOR

START / STOP AND RESET; SINGLE ACTION

CONTROL METHOD CROWN OR PUSH-PIECE AND MOVING SIDE SLIDE

BUTTON TYPE STANDARD GRIP BUTTONS

FIT TYPE MADE TO FIT IN PALM OF HAND

POWER SOURCE ONE OR TWO COMMERCIALLY AVAILABLE BATTERIES

TIME DIS PLAY LIQUID CRYSTAL

CASE AND INNER WORKINGS QUALITY AND STRENGTH / DURABILITY MADE TO

LAST MINIMUM OF TWO YEARS OR NORMAL USE

WARRANTY WARRANTED BY CONTRACTOR FOR PARTS AND

LABOR FOR TWO YEARS FROM DATE OF DELIVERY

TO GOVERNMENT

ENVIRONMENTAL PROTECTION WATER, DUST AND SHOCK RESISTANT

KEY FIELDS:

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military

Printed on: 05/11/2026 Page 12 destinations.

F or additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulat ions applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufac tured Wood Packaging Material for Export, shall apply

PCM

Regulatory Requirements: The offerer/contractor is encouraged to provide energy-efficient products to the maximum extent practicable in accordance with paragraph 23.203 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

QUALITY ASSURANCE

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, Printed on: 05/11/2026 Page 13

6645-01-106-4303 Ver: 17 UI: EA Status: Active AAC: H

STOPWATCH

NSN Description:

ITEM NAME STOPWATCH

MINIMUM LENGTH OF NYLON LANYARD 36.00 INCHES

MINIMUM OPERATING TEMPERATURE 14.00 DEGREES FAHRENHEIT

MAXIMUM OPERATING TEMPERATURE 122.0 DEGREES FAHRENHEIT

OVERALL HIGH TEMP RELATIVE HUMIDITY 50.00 PERCENT (+/- 20 PERC ENT)

ACCURACY WITHIN 0.03 PERCENT AT 25 DEGREES CELSIUS

UNIT TYPE DIGITAL STOPWATCH

DISPLAY SIZE JUMBO

DIGITAL DISPLAY TYPE HOUR, MINUTE, SECOND, TENTHS AND HUNDRETHS

OF A SECOND, MONTH, DAY, DATE AND ALARM

CONT ROLS TIME-OUT MODE, TWO SEPARATE CONTROLS FOR

START/STOP AND RESET

BUTTON TYPE EXTRA LARGE GRIP BUTTONS

FIT TYPE MADE TO FIT IN PALM OF HAND

POWER SOURCE BATTERY

TIME DISPLAY LIQUID CRYSTAL

CA SE AND INNER WORKINGS QUALITY AND STRENGTH / DURABILITY MADE TO

LAST MINIMUM OF TWO YEARS OR NORMAL USE.

WARRANTY WARRANTED BY CONTRACTOR FOR PARTS AND

LABOR FOR TWO YEARS FROM DATE OF DELIVERY

TO GOVERNMENT

S PECIAL FEATURE SPLIT MODE DISPLAY WHILE TIMING CONTINUES;

RESOLUTION IS 1/100 SECOND FOR FIRST 30

MINUTES AND THEN 1 SECOND INCREMENTS FOR

UP TO 24 HOURS

ENVIRONMENTAL PROTECTION WATER, DUST, AND SHOCK RESISTANT

KEY FIELDS:

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial

Printed on: 05/11/2026 Page 14

Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

F or additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulat ions applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufac tured Wood Packaging Material for Export, shall apply

PCM

Regulatory Requirements: The offerer/contractor is encouraged to provide energy-efficient products to the maximum extent practicable in accordance with paragraph 23.203 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

QUALITY ASSURANCE

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, Printed on: 05/11/2026 Page 15

Printed on: 05/11/2026 Page 16

6645-01-318-9833 Ver: 1 UI: EA Status: Active AAC: J

WATCH, WRIST

NSN Description:

ITEM NAME WATCH, WRIST

I.A.W. MIL-PRF-46374G

TYPE II - ANALOG, LONG LIFE (5-10 YEARS), MAINTAINABLE,

ANTIMAGNETIC, WATER-RESISTANT,

HIGH ALTITUDE, CORROSION-RESISTANT

CLASS 1 - ELECTRICAL MOVEMENT, BATTERY INSTALLED

OVERALL CASE DIAMETER 34.00 MM

OVERALL CASE THICKNESS 11.50 MM

OVERALL LUG WIDTH 16.00 MM

UNIT TYPE GENERAL PURPOSE QUARTZ

BACKGROUND COLOR BLACK

STRAP COLOR BLACK

STRAP MATERIAL tBALLISTIC NYLON

CASE MATERIAL COMPOSITE FIBRESHELL HIGH IMPACT

CRYSTAL TYPE SCRATCH RESISTANT SAPPHIRE

CROWN TYPE PRESSURE

MOVEMENT TYPE HIGH TORQUE QUARTZ MOVEMENT (ETA F06.115 HEAVYDRIVE)

JEWEL QUANTITY 3

SCALE QUANTITY t2

SCALE RANGE 0.0 / 12.0 HOUR AND 13.0 / 24.0 HOUR

WATER RESISTANT 30 METERS PER 100 FT (3 ATM)

HAND QUANTITY 3

HAND DESIGNATION SECOND HAND, MINUTE HAND AND HOUR HAND

HANDS COLOR WHITE

LUMINOUS FEATURES TRITIUM GAS TUBE S

SPECIAL FEATURES END-OF-LIFE INDICATOR, LIGHTWEIGHT CONSTRUCTION,

RUBBER BATTERY HATCH

KEY FIELDS:

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply

Printed on: 05/11/2026 Page 17 with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

F or additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulat ions applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufac tured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE.

PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL

CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

Th e Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such

Printed on: 05/11/2026 Page 18 conformance.

QUALITY ASSURANCE

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, Printed on: 05/11/2026 Page 19

6645-01-364-4042 Ver: 1 UI: EA Status: Active AAC: J

WATCH, WRIST

NSN Description:

ITEM NAME WATCH, WRIST

I.A.W. MIL-PRF-46374G

TYPE III - ANALOG, LONG LIFE (5-10 YEARS), MAINTAINABLE,

ANTIMAGNETIC, WATER-RESISTANT, HIGH ALTITUDE,

CORROSION-RESISTANT WITH ELAPSED TIME RING

CLASS 1 - ELECTRICAL MOVEMENT, BATTERY INSTALLED

OVERALL CASE DIAMETER 41.00 MM

OVERALL CASE THICKNESS 11.00 MM

OVERALL LUG WIDTH 20.00 MM

UNIT TYPE PILOT'S NAVIGATOR

BACKGROUND COLOR BLACK

STRAP COLOR BLACK

STRAP MAT ERIAL BALLISTIC NYLON

CASE MATERIAL COMPOSITE FIBRESHELL HIGH IMPACT

CRYSTAL TYPE SCRATCH RESISTANT SAPPHIRE

CROWN TYPE PRESSURE

MOVEMENT TYPE HIGH TORQUE QUARTZ MOVEMENT (ETA F06.115 HEAVYDRIVE)

BEZEL TYPE BI-D IRECTIONAL

BEZEL SCALE 12 HOUR

JEWEL QUANTITY 3

SCALE QUANTITY 2

SCALE RANGE 0.0 / 12.0 HOUR AND 13.0 / 24.0 HOUR

WATER RESISTANT 60 METERS PER 195 FT (6 ATM)

HAND QUANTITY 3

HAND DESIGNATION SECOND HAND, MINUTE HAND AND HOUR HAND

HANDS COLOR WHITE

LUMINOUS FEATURES TRITIUM GAS TUBES

SPECIAL FEATURES END-OF-LIFE INDICATOR, BI-DIRECTIONAL 12 HR (60-CLICK)

GMT BEZEL, EASY-ACCESS BATTERY HATCH

KEY FIELDS:

Printed on: 05/11/2026 Page 20

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

F or additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulat ions applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufac tured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE.

PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL

CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

Th e Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

Printed on: 05/11/2026 Page 21

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

QUALITY ASSURANCE

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, Printed on: 05/11/2026 Page 22

6645-01-544-0408 Ver: 16 UI: EA Status: Active AAC: H

WATCH, WRIST

NSN Description:

ITEM NAME WATCH, WRIST

I.A.W. MARATHON WATCH CO P/N WW194014

OR COMMERCIAL EQUAL

OVERALL CASE DIAMETER 46.00 MM

OVERALL CASE THICKNESS 17.00 MM

OVERALL CASE MATERIAL STEEL 316L CASE WITH SCREW DOWN CROWN

UNIT TY PE CHRONOGRAPH PILOT

MINIMUM JEWEL QUANTITY 25

MINIMUM RUNNING TIME 36 HOURS

CHRONOGRAPH TIME RING TYPE INNER TIME RING WITH 1/100 MINUTE

AND 1/5 SECOND TIMING

MOVEMENT TYPE MECHANICAL ANALOG (MANUAL)

AND SELF-WINDING ( AUTOMATIC)

DISPLAY TYPE DAY AND DATE WITH RAPID DAY AND DATE CONNECTION

BAND MATERIAL VULCANIZED RUBBER STRAP

AND STAINLESS STEEL BUCKLE

BAND COLOR BLACK

BACK ENGRAVING MARKINGS ON BACK MUST INCLUDE NOMENCLATURE, NSN,

NUMBER OF MILLICURIES, NRC LICENSE NO., CONTRACT

NO., CAGE CODE, DATE OF PRODUCTION, SERIAL NO. FOR

TRACEABILITY AND MAINTENANCE

DIAL WINDOW MATERIAL TYPE SAPPHIRE

DISPLAY TYPE ANALOG

DIAL COLOR tWHITE NUMERALS ON BLACK BACKGROUND

NON-MAGNETIC YES

GRADUATION UNIT 1.00 SECOND OR 1.00 HOUR

SUB DIAL QUANTITY 3

SCALE QUANTITY 2

HAND QUANTITY 3

HAND DESIGNATION SECOND HAND, MINUTE HAND AND HOUR HAND

HAND TYPE SWEEP SECOND HAND

HAND AND HOUR ILLUMINATION SELF LIGHTING TRITIUM TUBES (ISOTOPE H3); (ACTIVITY

BETWEEN 26 AND 30 MILLICURIES)

SCALE RANGE 0.0 / 12.0 HOUR AND 13.0 / 24.0 HOUR

SCALE TYPE TWO SCALE DIAL SHOWS STANDARD TIME AND

SUPPLEMENTAL MILITARY TIME

ADDITIONAL ILLUMINATION REGISTER INDEXES AND HANDS USE MARAGLO PAINT

Printed on: 05/11/2026 Page 23

FOR LOW LIGHT VIEWING

LUMINOUS HANDS INCLUDED

LUMINOUS NUMERAL INCLUDED

STEM CAP PROVIDED

SPECIAL FEATURES REVOLVING 0 TO 60 EXTERNAL BEZEL;

DAY AND DATE CALENDAR

BEZEL TYPE UNI-DIRECTIONAL

APPLICATIONS FOR USE IN DIVES, SEARCH AND RESCUE OPERATIONS,

AS WELL AS PILOTS AND AIR CREW

MANUFACTURE REQUIREMENTS MUST MEET U.S. NRC LICENSE REQUIREMENTS (10 CFR

32.22).

WARRANTY FOR 3 YEARS PARTS AND LABOR FROM THE DATE OF

DELIVERY TO THE GOVERNMENT

ENVIRONMENTAL PROTECTIONWATER TIGHT CASE; WATER RESISTANT TO 300 METERS

(30 ATM, 1,000 FEET)

Light sources for dial, minute and hour hands provided by tritium tubes (Activity between 26 to 30 millicuries).

Manufacturer must meet U.S. NRC License requirements (10 CFR 32.22). Markings on back must be engraved with:

Nomenclature, NSN, number of m illicuries, NRC License no., Contract no., Cage Code, Date of Production, Serial no. for traceability and maintenance.

[Brand Equal][SDS Flag] Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

FAR Provisions 52.211-6, Brand Name or Equal Applies.

In order for the government to make an "or equal" determination of the offered product(s), the Bidder/Vendor must furnish information that specifically addresses each characteristic within the item purchase description. The unit of issue, unit of measure, test methods and results, if required, must also be included. Failure to furnish this information/literature will result in the bid being rejected as non-responsive and will not be considered for award. (see FAR clause 52.211-6).

KEY FIELDS:

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

Printed on: 05/11/2026 Page 24

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

F or additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

MARKING

In addition, supplier shall provide MSDS in accordance with Fed-Std-313D, dated April 3, 1996, and Change Notice 1, dated March 21, 2000.

MSDS - Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities.

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulat ions applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufac tured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE.

PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL

CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

Th e Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be

Printed on: 05/11/2026 Page 25

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

QUALITY ASSURANCE

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, Printed on: 05/11/2026 Page 26

6645-01-544-9475 Ver: 13 UI: EA Status: Active AAC: H

WATCH, WRIST

NSN Description:

ITEM NAME WATCH, WRIST

I.A.W. MARATHON WATCH CO. P/N WW194013 OR

EQUAL COMMERCIAL

MIL-PRF-46374

TYPE: III - ANALOG, LONG LIFE (5-10 YEARS),

MAINTAINABLE, ANTIMAGNETIC, WATER-RESISTANT,

HIGH ALTITUDE, CORROSION-RESISTANT, WITH

ELAPSED TIME RING

CLASS: 1 - ELECTRICAL MOVEMENT, BATTERY

INSTALLED

CASE DIAMETER 41.00 MM

CASE MATERIAL RESIN; FIBRESHELL

UNIT TYPE MILITARY NAVIGATOR WITH DATE

UNIT SHAPE ROUND

USAGE DESIGN FOR HIGH ALTITUDE, PILOT / PARACHUTE OR

LAW ENFORCEMENT

TIME RING TYPE BI-DIRECTIONAL TIME ZONE

MOVEMENT TYPE ETA F06 QUARTZ

DISPLAY TYPE ANALO G WITH 2 TIME SCALE AND STOP

SECOND HIGH TORQUE MOVEMENT

BACKGROUND FACE COLOR BLACK

BACK OF WATCH MATERIAL ENGRAVED STAINLESS STEEL

DIAL NUMERAL COLOR WHITE

DIAL WINDOW MATERIAL ACRYLIC

CRYSTAL MATERIAL HESALITE FOR EXCESSIVE EXTERNAL

PRESSURE CHANGES

HAND TYPE SWEEP SECOND HAND

HAND QUANTITY 3

HAND DESIGNATION SECOND HAND, MINUTE HAND AND HOUR

HAND

LUMINOUS HANDS INCLUDED

HAND AND HOUR ILLUMINATION SELF LIGHTING TRITIUM TUBES (ISOTOPE H3);

(ACTIVITY BETWEEN 26 AND 30 MILLICURIES)

BEZEL MATERIAL FIBRESHELL

BAND COLOR BLACK

BAND MATERIAL NYLON MIL SPEC STRAP (EXTRA LONG TO FIT

Printed on: 05/11/2026 Page 27

OVER UNIFORM) I .A.W. MIL-S-46383B, TYPE: III

BAND LENGTH DESIGN MEN'S STANDARD - EXTRA LONG TO FIT OVER

UNIFORM I.A.W. MIL-S-46383B, TYPE: III

SCALE DIAL QUANTITY 2

SCALE DIAL RANGE 0.0 / 12.0 HOUR AND 13.0 / 24.0 HOUR

SCALE DIAL FEATURE SHOWS STANDARD TIME AND SUPPLEMENTAL

MILITARY TIME

BATTERY REPLACEMENT TYPE BATTERY #371

BATTERY REPLACEMENT FEATURE END OF LIFE INDICATOR (EOL); THE SECOND

HAND ADVANCES IN 4 SECOND INCREMENTS

NON-MAGNETIC tYES

MANUFACTURE REQUIREMENT MUST MEET U.S. NRC LICENSE

REQUIREMENTS (10 CFR 32.22)

WARRANTY 1 YEAR

SPECIAL FEATURE DUST PROOF

ENVIRONMENTAL PROTECTION HIGH IMPACT AND WATER RESISTANT UP TO 6

ATM (60 METERS / 200 FFET); CORROSION

RESISTANT; MOVEMENT IS ACCURATE TO

-0.3/+0.5 SECONDS PER DAY

[Brand Equal] Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

FAR Provisions 52.211-6, Brand Name or Equal Applies.

In order for the government to make an "or equal" determination of the offered product(s), the Bidder/Vendor must furnish information that specifically addresses each characteristic within the item purchase description. The unit of issue, unit of measure, test methods and results, if required, must also be included. Failure to furnish this information/literature will result in the bid being rejected as non-responsive and will not be considered for award. (see FAR clause 52.211-6).

KEY FIELDS:

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial

Printed on: 05/11/2026 Page 28

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

F or additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulat ions applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufac tured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE.

PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL

CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

Th e Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

Printed on: 05/11/2026 Page 29

QUALITY ASSURANCE

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, Printed on: 05/11/2026 Page 30

6645-01-547-0300 Ver: 8 UI: EA Status: Active AAC: H

WATCH, WRIST

NSN Description:

ITEM NAME WATCH, WRIST

I.A.W. MIL-PRF-46374

TYPE I - ANALOG, SHORT LIFE (2 YEARS), NON-

MAINTAINABLE, ANTIMAGNETIC, WATER-RESISTANT

CLASS I - ELECTRICAL MOVEMENT, BATTERY INSTALLED

I.A.W. MARATHON WATCH CO P/N WW194015-BK OR EQUAL

COMMERCIAL

OVERALL CASE SIZE 1.312 INCHES (34MM)

CASE DESIGN ROUND

OVERALL COLOR BLACK CASE AND STRAP

OVERALL MATERIAL STAINLESS STEEL BACK; FIBERSHELL CASE;

HESALITE CRYSTA L; NYLON STRAP

CLOSURE TYPE BUCKLE, ADJUSTABLE

FACE TYPE BLACK WITH 12 AND 24 HOUR DIAL

DIAL ILLUMINATION LUMINOUS HANDS AND HOUR MARKINGS

SECOND HAND TYPE SWEEP

LUMINOUS SELF LIGHTING TRITIUM TUBES

INCLUDES DATE BETWEEN TH E 4 AND 5 O'CLOCK POSITIONS

POWER SOURCE BATTERY

MOVEMENT HIGH TORQUE QUARTZ, WITH ANALOG DIAL

TIME SCALES 2 - STANDARD AND SUPPLEMENTAL

SPECIAL FEATURES INTENDED FOR USE IN THE FIELD AND INCLUDES

A BATTERY END OF LIFE INDI CATOR

ENVIRONMENTAL PROTECTIONHIGH IMPACT FIBERSHELL, WATERESISTANT

(TO 3 ATM, 30 METERS), AND DUSTPROOF

WARRANTY TWO YEARS (MINIMUM)

Light sources for dial, minute and hour hands provided by tritium tubes (Activity between 26 to 30 m illicuries).

Manufacturer must meet U.S. NRC License requirements (10 CFR 32.22). Markings on back must be engraved with:

Nomenclature, NSN, number of millicuries, NRC License no., Contract no., Cage Code, Date of Production, Serial no. for traceability a nd maintenance.

[Brand Equal] Offering on:

Printed on: 05/11/2026 Page 31

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

FAR Provisions 52.211-6, Brand Name or Equal Applies.

In order for the government to make an "or equal" determination of the offered product(s), the Bidder/Vendor must furnish information that specifically addresses each characteristic within the item purchase description. The unit of issue, unit of measure, test methods and results, if required, must also be included. Failure to furnish this information/literature will result in the bid being rejected as non-responsive and will not be considered for award. (see FAR clause 52.211-6).

KEY FIELDS:

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

F or additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulat ions applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufac tured Wood

Printed on: 05/11/2026 Page 32

Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE.

PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL

CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

Th e Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

QUALITY ASSURANCE

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, Printed on: 05/11/2026 Page 33

6645-01-550-7391 Ver: 5 UI: EA Status: Active AAC: H

WATCH BRACELET

NSN Description:

ITEM NAME WATCH BRACELET

LUG WIDTH 0.75 INCHES (20MM)

OVERALL LENGTH 8.00 INCHES

USAGE DESIGN FOR USE ON MARATHON'S DIVER'S WRIST WATCH

# WW 194006 (NSN 6645-21-558-0133) OR #WW 194007

(NSN 6645-20-001-9382 )

OVERALL COLOR SILVER

OVERALL MATERIAL 316L STAINLESS STEEL CONSTRUCTION

OVERALL NUMBER OF LINKS 14 SOLID BRACELET LINKS

END LINKS STYLE SOLID LINKS THAT EXACTLY FIT DIVER'S WRIST WATCH

INCLUDES FLOATING DOUBLE SCREW LINK SYSTEM

DIVER'S EXTENSION ON BUCKLE

[Brand Equal] Offering on:

Manufacturer's Name: ______________________________

Brand __________________________________________

Model or Part No. __________________________________

FAR Provisions 52.211-6, Brand Name or Equal Applies.

In order for the government to make an "or equal" determination of the offered product(s), the Bidder/Vendor must furnish information that specifically addresses each characteristic within the item purchase description. The unit of issue, unit of measure, test methods and results, if required, must also be included. Failure to furnish this information/literature will result in the bid being rejected as non-responsive and will not be considered for award. (see FAR clause 52.211-6).

KEY FIELDS:

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial

Printed on: 05/11/2026 Page 34

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

F or additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .