Attachment A SOW (Offerors form).docx

Combined Statement of Work/Quoter’s Pricing List picture for style reference only

General: Enclosed aluminum “Race” style trailer for hauling Can Am Defender 6X6 UTV and supporting fire incidents with necessary access door, electrical, and climate control features.

This Statement of Work (SOW) has both mandatory requirements and optional specifications. Enhancements are for the “betterment” of the procurement. You may also offer extra enhancements as detailed on the enhancements page below. Check the blanks if you can offer each specification.

Custom Built Trailer Required Specifications:

1. ____8.5’X22’ enclosed aluminum “Race” trailer (not including trailer tongue length).

2. _____Either flat or “bull nose” front trailer. (no v front)

3. _____Trailer GVWR placarded at 12,000 lbs. (no less or more).

4. _____Tandem axle with each axle rated at 6,000 lbs. (or 7,000 lbs. as long as trailer GVWR remains at 12,000 lbs.) with 8-bolts with electric brakes.

5. _____Spread axel design.

6. _____16” on center floor crossmembers.

7. _____Main trailer frame rails 6” or greater material.

8. _____Interior height of enclosed trailer is min 84” (or as short as possible to allow for a minimum rear door opening of 79” tall).

9. _____Wall studs and roof bows 16” on center.

10. _____15” or larger radial tires and aluminum wheels with 8 bolt hubs.

11. _____Trailer spare tire.

12. _____Adjustable/removable hitch coupler with 2-5/16” ball with safety chains.

13. _____Trailer wiring connector 7 pin round.

14. _____2000# or greater tongue jack.

15. _____Flipped up driver side escape door over wheels approximately the width of the wheel well.

16. _____Rear ramp door. Door opening minimum dimensions 86” width X 79” tall. (Rear door height and width needs to accommodate a Can Am 6X6 UTV with rear ramp door folded down).

17. _____Passenger side aluminum entry door (34”-48” width).

18. _____Passenger side entry door mounted fold-up/down or recessed step.

19. _____2 sliding RV style windows w/screen approximately 30”X30” each. Approximate location: 1 centered between front of trailer and front of escape door on driver side and 1 centered between rear of trailer and rear of entry door on passenger side. Top of windows approximately even with top of entry door.

20. _____Lockable hardware on all doors and ramp.

21. _____Wood ¾” or greater treated or water-resistant plywood flooring.

22. _____Interior walls wood with white vinyl or similar covering.

23. _____Integrated base cabinets mount across full width of front trailer wall.

24. _____Integrated overhead cabinet mounted above base cabinets across front trailer wall with benchtop space between base and upper cabinets.

25. _____Floor e-track tie down tracks or 6 total 5000# D-rings installed spaced evenly in driver/passenger side pairs starting approximately 1FT from rear door going forward ending approximately 4FT from front trailer wall.

26. _____Pair of two-way side vents and/or one or more roof vents.

27. _____LED trailer exterior brake, turn signal, and side marker lighting.

28. _____Rear roof spoiler with integrated 12V LED loading lights with switch.

29. _____12V interior electrical components to include:

a. 4 or more LED 12v lights in interior.

b. 12V marine battery with box wired to trailer 12V interior electrical components.

30. _____Exterior 110-volt generator input hookup.

31. _____110V interior and exterior electric components to include:

a. 30 or greater AMP junction box connected to generator input.

b. AC/DC power distribution and converter panel.

c. 3 or more interior outlets at least 1 of which is located on driver side wall.

d. 1 or more outside GFCI outlet(s)

e. 4 – 24”-48” interior LED lights with wall mounted switch near passenger side entry door.

f. 2 passenger side exterior recessed “flood” style lights with switch.

g. 2 driver side exterior recessed “flood” style lights with switch.

h. Air Conditioning and Heat unit (roof mounted) 13,500 BTU 110-volt low profile installed and connected to main 110V electrical junction box. Integrated heat strip. Wall mounted thermostat.

32. Trailer brake breakaway safety system.

Price for mandatory requirements: $_________

Optional trailer specifications (if available) to improve functional value to the Government.

1. _____Decrease spacing of floor crossmembers to 12” on center.

2. _____Ceiling insulated.

3. _____Walls insulated.

4. _____Tapered bottom trailer skirting to maximize ground clearance.

5. _____16” minimum trailer tire size.

6. _____Spare tire mount recessed in interior floor spare tire compartment.

7. _____Extended tongue length by 6” if an available manufacturer option.

8. _____Rear skid rollers or slides.

9. _____Rear pair of stabilizer jacks.

10. _____Window and screen in passenger side entry door.

11. _____1 or more additional 110V interior outlet.

12. _____Exterior DOT reflective tape.

13. _____Red color if available on custom built trailer.

Price for Optional specifications: $_______

Enhancements

Enhancements: If you can offer an enhancement to any of the aforementioned mandatory specifications (#1--#32) or optional specifications (#1--#13), or if you have an extra enhancement that is not an enhancement to a mandatory requirement or optional specification, you may offer that solution below. Add extra line items below as appropriate.

Enhancements to mandatory requirements:

No. ____(Pick the number it enhances, #1--#32) Name of Enhancement:

How useful:

Price: $_______

Enhancements to optional requirements (#1--#13):

No. ___(Pick the number it enhances, #1--#13 above) Name of Enhancement:

How useful:

Price: $_______

Extra solutions:

No. ____ Name of Enhancement:

How useful:

Price: $______

GRAND TOTAL $__________ (for mandatory requirements, optional specifications, and all enhancements) image1.png