Attachment_A_-_Salient_Characteristics_-_GM_Plow_and_Liftgate.pdf
PDF 156 KB Posted
- Attached to
- EC - GM Plow and Liftgate
- Solicitation number
- 140R6024Q0071
About this file
This document is an attachment titled "Salient Characteristics: GM Plow and Liftgate" that provides detailed specifications for a snowplow and liftgate to be installed on a 2024 Ford F-250 truck. The equipment must be installed at one location within 125 road miles of The Green Mountain Powerplant in Silverthorne, Colorado, and the installation process shall take no longer than one week.
The snowplow must have two independently controlled blades, be made of at least 11-gauge steel, be 8 feet 2 inches wide, have a height of 30 inches at the center and 38 inches at the ends, and be capable of hydraulic operation. The liftgate must be made of steel with an anti-skid platform, be capable of lifting 1,300 lbs, have a 55-inch by 38-inch loading area, and be hydraulically driven. The document also specifies requirements for a headache rack.
This attachment is referenced in Solicitation Number 140R6024Q0071 issued by the Department of the Interior, Bureau of Reclamation, for the procurement of a new plow and liftgate for a 2024 Ford F-250. The solicitation is set aside for small businesses under NAICS code 336390 - Other Motor Vehicle Parts Manufacturing.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140R6024Q0071_Amd_0001.pdf | ||
| Combined_Synopsis_Solicitation_-_21_May_2024_GM_Snowplow_and_Liftgate.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics:
• All the following equipment must be installed at one location within 125 road miles of The Green Mountain Powerplant (170 CR
1813 Silverthorne Colorado, 80498).
• Installation for all components shall take place at one time and no longer than 1 week.
• Reclamation staff will drop off and pick up truck.
Snowplow:
-Shall be mounted/installed both mechanically and electrically with all associated hardware and wiring to a 2024 Ford F-250.
-Shall have two independently controlled blades with a hinge in the middle.
-Shall be made of steel no less than 11 gauge.
--Shall be 8 ft. 2 in wide
-shall be 30 inches in height at center and taper up to 38 inches at ends.
-Shall be capable of being controlled within cab of vehicle.
-Shall be capable of hydraulic operation at right and left angle.
-Shall be capable of independent hydraulic operation of each wing of blade.
-Shall be capable of hydraulically dropped as well as lifted.
-Shall have dual trip mechanism.
-Shall have snow deflector attached at top of plow.
-Shall have a one-person attachment and detachment process.
-Shall have dual LED lighting system attached to plow system.
-Shall have replaceable cutting edge.
-Shall have adjustable height shoes.
-Shall have cold weather hydraulic fluid installed.
-Snow plow will be fully operational with the above minimum listed requirements at time of pickup.
Attachment A
Lift Gate:
-Shall be mounted/installed both mechanically and electrically with all associated hardware and wiring to a 2024 Ford F-250.
-Shall be made of steel with anti-skid texturing on platform.
-Shall be of color black with anti-corrosion protective coating.
-Shall be capable of lifting 1300 lbs. from fully extended lowered position to fully raised bed level position and vis a versa.
-Shall be full width of truck bed.
-Shall be fitted with a two-piece folding treadplate with a 55-inch-wide x 38-inch loading area.
-shall have a 4-inch taper at edge of treadplate to meet ground level when in fully lowered position.
-Shall be hydraulically driven with dual hydraulic cylinders (one on each side of liftgate) operating parallel arms.
-Shall have a hydraulic pressure relief system to prevent overloading of liftgate.
-Shall be nearly maintenance free with self-lubricating composite bushings.
-Shall be operated by a moisture resistant toggle switch mounted at side of liftgate.
-All original functionality of sensors and camera systems shall be provided and operable after installation of liftgate.
-Original tailgate with camera system and bumper will be returned undamaged.
-Liftgate will be fully operational with the above minimum listed requirements at time of pickup.
Headache Rack:
-Shall be mounted/installed to a 2024 Ford F-250.
-Shall be a metal frame made of reinforced steel fitted across the truck beds width mounted to the truck bed to protect cargo from entering the cab from the rear window.
-Shall be louvered within metal frame allowing rear viewing access from within cab.
-Shall be powder coated black in color.
-Shall have tie down hooks affixed to each side of frame.
File details come from the government source that posted it. Updated .