Attachment A - Salient Characteristics.pdf
PDF 245 KB Posted
- Attached to
- 7110--NEW - STX - Biomed Furniture
- Solicitation number
- 36C25723Q1105
About this file
This document outlines specifications for biomedical furniture to be procured under federal solicitation number 36C25723Q1105. The solicitation seeks process tables, workbenches, and accessories from Formaspace to outfit a Veterans Affairs medical center. Item 1 specifies a process table with an antimicrobial finish on exposed wood, heat and scratch resistant surfaces, and a 12-year warranty. Item 2 details a smaller process table. Item 3 is for accessories to complement existing workstations. All items require interchangable storage components, lockable drawers and units, and load capacity of at least 1000 pounds. The solicitation provides specifications for size, material, finish, and adjustability requirements. The procurement supports the Department of Veterans Affairs and Veterans Health Administration needs within Veterans Integrated Service Network 17.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 36C25723Q1105 0003.docx | DOCX document | |
| Attachment C - Floor Plan 2 of 2.pdf | ||
| Attachment B - Floor Plan 1 of 2.pdf | ||
| 36C25723Q1105.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment A Salient Characteristics
BioMed GLF
Line #
MTR
QTY
Description Preferred
Manufacturer
1 PST1 12 Process Table (Workbench) Formaspace
GENERAL REQUIREMENTS for all PROCESS TABLES
a. Anti-microbial finish applied to all exposed wood surfaces
b. Surfaces must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners.
c. Meets or exceeds SCS Indoor Air Quality standards (SCS EC10.2-2007/ANSI/BIFMA M7.1- 2001).
d. Contributes to LEED Credits
e. A minimum of 12 years, 3 shift warranty.
Basis of Design: Formaspace Workbench Finish: Frame Standard Duty Color Almond, Top HPL Black, Shelves LPL Black
Salient Characteristics: To include minimum of the following specifications:
a. Tables shall be freestanding work surfaces mounted on swivel casters with wheel locks for maximum mobility, or on glides.
b. Tables shall be available in nominal sizes 30"D x 66"W x 30"H from 24”- 36”D x 48”-72”W and adjustable from 29”-38”H in one inch increments.
c. Depending on the width of table, the support legs must support from 4-8 storage frames on the underside of the table.
d. Storage frames to be attached to its underside which shall hold a variety of interchangeable components such as shelves, three sizes of drawers (3”, 6”, and 9”) and a storage unit.
e. 3, 6, and 9 inch drawers hold assorted sub containers and dividers to custom fit the customer’s needs
f. Drawers extend fully without wobbling or failing, increasing the efficiency of stocking and restocking
g. Drawer should have an integrally molded drawer glide to function as a handle.
h. Drawers shall have the capability to accept Snap-On label clips for clinical material designation
i. Drawer glides to have built-in stops to prevent accidental removal.
j. Storage units and drawers shall be lockable.
k. Sub containers and dividers available for storing small loose or irregularly shaped items.
l. Tops are sturdy, built as part of the cart- not a slip on addition.
m. Mobile tables shall be easily movable freestanding work surfaces. Their tops must be available in several sizes, shapes, and finishes to accommodate different functional needs such as, lab equipment or other equipment.
n. Workstation to be manual height adjustable.
o. Tops must be available in HPL, or Chemsurf ® Electrical Safety Discharge (ESD) Laminate
p. Tops shall have a static load capacity of a minimum of 650 lbs 1000 lbs.
q. Tables shall be available with leveling guides or 4" casters with brakes.
r. Tables shall accommodate accessories such as equipment, rails, flat panel mount, keyboard trays, marker board, power strip, riser frame, divider and riser frame and cover.
Accessories:
a. Monitor Arms (2)
b. Power Bar, 12 plugs
c. Peg Board
e. Under shelf lighting
f. Rear spreader
g. ESD user kit
h. Lower under surface and upper storage, lockable, keyed alike
Image is representational of general design intent.
2 PST1 37 Process Table Formaspace Basis of Design: Formaspace Workbench Table
Finish: Frame Standard Duty Color Almond, Top HPL Black, Shelves LPL Black
Salient Characteristics: To include minimum of the following specifications:
a. Tables shall be freestanding work surfaces mounted on swivel casters with wheel locks for maximum mobility, or on glides.
b. Tables shall be available in nominal sizes 24"D x 36"W x 30"H from 24”- 36”D x 48”-72”W and adjustable from 29”-38”H in one inch increments.
c. Depending on the width of table, the support legs must support from 4-8 storage frames on the underside of the table.
d. Storage frames to be attached to its underside which shall hold a variety of interchangeable components such as shelves, three sizes of drawers (3”, 6”, and 9”) and a storage unit.
e. 3, 6, and 9 inch drawers hold assorted sub containers and dividers to custom fit the customer’s needs
f. Drawers extend fully without wobbling or failing, increasing the efficiency of stocking and restocking
g. Drawer should have an integrally molded drawer glide to function as a handle.
h. Drawers shall have the capability to accept Snap-On label clips for clinical material designation
Formaspace
m. Mobile tables shall be easily movable freestanding work surfaces. Their tops must be available in several sizes, shapes, and finishes to accommodate different functional needs such as, lab equipment or other equipment.
n. Workstation to be manual height adjustable.
o. Tops must be available in HPL, or Chemsurf ® Electrical Safety Discharge (ESD) Laminate
3 PST1 25(Lot) Process Table (Accessories) Basis of Design: Formaspace Workbench Accessories for Existing Workstations
Finish:
Salient Characteristics: To include minimum of the following specifications:
a. Tables shall be freestanding work surfaces mounted on swivel casters with wheel locks for maximum mobility, or on glides.
b. Tables shall be available in nominal sizes 30"D x 66"W x 30"H from 24”- 36”D x 48”-72”W and adjustable from 29”-38”H in one inch increments.
c. Depending on the width of table, the support legs must support from 4-8 storage frames on the underside of the table.
d. Storage frames to be attached to its underside which shall hold a variety of interchangeable components such as shelves, three sizes of drawers (3”, 6”, and 9”) and a storage unit.
e. 3, 6, and 9 inch drawers hold assorted sub containers and dividers to custom fit the customer’s needs
f. Drawers extend fully without wobbling or failing, increasing the efficiency of stocking and restocking
g. Drawer should have an integrally molded drawer glide to function as a handle.
h. Drawers shall have the capability to accept Snap-On label clips for clinical material designation
m. Mobile tables shall be easily movable freestanding work surfaces. Their tops must be available in several sizes, shapes, and finishes to accommodate different functional needs such as, lab equipment or other equipment.
n. Workstation to be manual height adjustable.
o. Tops must be available in HPL , or Chemsurf ®
Accessories:
a. Monitor Arms (2)
b. Power Bar, 12 plugs
c. Peg Board
d. Uppershelf (1)
e. Under shelf lighting (1)
File details come from the government source that posted it. Updated .