Attachment A - Salient Characteristics.docx

SALIENT CHARACTERISTICS

DIALYSIS SUPPLIES

SALIENT CHARACTERISTICS OF PRISMAFLEX M150 SET

The dialysis Unit has a need to procure 230 cases of Prismaflex M150 set which must have the following characteristics:

1. Must be compatible with the Prismaflex control unit

2. Must be Single use only

3. Must be a sterile fluid path and non-pyrogenic

4. Must not be made with natural rubber latex

5. Contains PVC

6. Contains DEHP

7. Shipping Carton characteristics

a. 11.81 IN in length

b. 15.75 IN in width

c. 16.54 IN in height

d. 1.75 FC

e. 10.43 LB in weight

f. Pack factor-4

SALIENT CHARACTERISTICS OF 5 LITER EFFLUENT BAG

The dialysis Unit has a need to procure 120 cases of 5-liter Replacement Effluent Bag which must have the following characteristics:

1. Must come with female luer lock connector to allow safe connection to hemodialyzers

2. Must be single use only

3. Must be non pyrogenic fluid path

4. Not made with natural rubber latex

5. Contains PVC

6. Non-DEHP

7. Shipping Carton characteristics

g. 14.57 IN in length

h. 21.26 IN in width

i. 5.51 IN in height

j. 0.99 FC in volume

k. 15.54 LB in weight

l. Pack factor-50

SALIENT CHARACTERISTICS OF THERMAX BLOOD WARMER POUCH

The dialysis Unit needs to procure 60 cases of TherMax Blood Warmer Pouch (24/CA) and must have the following characteristics:

1. Must be compatible with the Prismaflex control unit and use a bi-directional connection

2. Heats blood directly

3. Independent from therapy flow rates

4. Continuous warming

5. Avoids precipitation caused by warming of bicarbonate solutions

6. Automatically adjusts heating based on estimated return blood temperature to achieve prescribed warming target

7. When working directly with the Prismaflex control unit, no further management or adjustments should be needed once the prescription is entered

8. Automatic adjustment of heating during therapy interruptions to ensure blood is not overheated

9. Limit the maximum outlet temperature to 42°C

10. Warmer must switch off in case of blood pump stop or communication failure

11. Integrated alarm system with the Prismaflex system to notify the user if unexpected conditions are encountered such as leakages or other issues due to external factors

12. Physical dimensions Weight: 3.3 kg Height: Approx. 135 mm Width: Approx. 160 mm Depth: Approx. 350 mm

SALIENT CHARACTERISTICS OF AUTO-EFFLUENT DRAIN ACCESSORY

The dialysis Unit needs to procure 75 cases of PrisMax Auto Effluent Sets (8/CA) and must have the following characteristics:

1. Must be compatible with the Prismaflex control unit

2. Pump effluent collected during therapy into a drain

3. Use a scale-based measurement system

4. Line system and hook with a range up to 18 m (60 ft)

5. Drain accessory must remain in place for up to six days, even when changing CRRT therapy modes or blood filter sets

6. Can be paused as needed to allow for changes in patient location or drain point

7. Prevent effluent backflow using a one-way check valve