Attachment A - Acceptability Standards.pdf

Attachment A – Acceptability Standards

• Forklift identified as meeting requirements is a Hyster H50XT.

• Basic Requirement: 5,000 lb nominal capacity, Class V, pneumatic tire lift truck.

• Manufacturer must have local dealer / service center for maintenance and warranty – within

100 miles of Belgrade, MT

• Warranty o 12 month / 2000 Hour Manufacturer’s warranty o 36 month / 6000 Hour Powertrain warranty

• Powertrain specifications:

o Self Energizing Drum Brakes o Engine – PSI 2.4L LPG o Powershift 1 speed transmission o High Air Intake o Counterweight Rear Exhaust o Pressure Sensing Low LPG Fuel Indicator o Anti – clog Radiator o Keyswitch start o UL Label – Classification Type LP o 33.5 lb Steel LPG Fuel Tank with auxiliary fill valve o Single Pedal Inch/Brake Arrangement

• Mast specifications:

o 3-stage Full Free Lift mast o 189 Inch Max Lift Height o 84 Inch overall lowered Height o Mast Tilt – 6 degrees forward / 6 degrees back

• 42 inch Long X 1.6 inch thick X 3.9 inch wide – Class II Hook Type – Standard Taper Forks

• Hydraulics:

o 3 Function – 1 Auxiliary – Hydraulic Control Valve o Mechanical Lever Hydraulic Controls – Cowl Mounted

• Wheels & Tires:

o Drive Tires – 7.00-12 Pneumatic Shaped Solid (PSS) – 2 Layer Construction – Standard tread width o Steer Tires – 6.00 x 9 PSS – 2 Layer Construction

• Dual Side View Mirrors

• 88 inch overhead guard

• Directional Control Lever – Mounted on left side of steering column

• Steering Wheel with spinner knob