Attachment 8 ULTRA XV High Efficiency V Cell.docx

ULTRA XV

High Efficiency V-Cell

High Efficiency V-Cell Filter

Energy Savings 0.70.68

ENERGY SAVINGS

0.58 0.58 0.53 0.37 0.24

0.6Initial Resistance ["W.G.]

0.5

0.4TRI-CELL R MERV 14

SYN-PAC R MERV 14

TRI-CELL ASHRAE MERV 14

PREDATOR II MERV 14

0.3PREDATOR

8-Panel MERV 14

0.2ULTRA XV M 15

0.1

ULTRA™ MEDIA

ULTRA media is a new generation of media that offers unmatched and innovative performance with MERV 16+, MERV 15 and MERV 13 efficiency with ultra low resistance (0.31” WG on a MERV 15) - creating a new industry benchmark for efficiency and energy savings. ULTRA media has proven itself in testing utilizing the ASHRAE

52.2 Appendix J test method.

The ULTRA MERV 16+ media provides near HEPA performance at a fraction of thepressure drop which equals to energy ULTRA™ MEDIA savings. The reduction on pressure drop is greater than 50% which could translate into significant energy savings. Low pressure drop is not all the ULTRA media offers - also ultra-high efficiency with results on the ASHRAE 52.2 showing HEPA-like efficiencies.

ENERGY SAVINGS

The ULTRA XV filter offers many features that will benefit a ‘Green Initiative Program’ - these include: Energy Savings, LEED® IEQ Credit, Longer Service Life, etc. Lower Resistance leads to INITIAL RESISTANCE energy savings in almost all applications - the chart (above) compares filters of similar efficiencies and shows the dra- matic difference the ULTRA XV delivers. That is a reduction of up to 55% in resistance which translates into Energy Savings.

In a recent study actual energy savings of 40% was documented using this new media. All ULTRA XV filters will help to achieve valuable LEED points under the Indoor Environmental Quality for reduction of particles in air distribution.

INITIAL EFFICIENCY

@ 0.3 micron of various air filtration products

70PREDATOR

8-Panel MERV 14

ULTRA XV M 15

60TRI-CELL R MERV 14

SYN-PAC R MERV 14

TRI-CELL ASHRAE MERV 14

PREDATOR II MERV 14

ULTRA XV after test was suspended at 25” WG with NO air bypass.

EFFICIENCY

Tri-Dim’s ULTRA media achieves and maintains a MERV 15 efficiency when tested under the new Appendix J of ASHRAE 52.2. The chart lower right shows the initial efficiency on 0.3 micron particles on filters of similar efficiencies (these are the same filters in the Resistance Chart on the previous page). Again there is a dramatic difference. This difference can best be shown by particle penetration. A filter that is 70% efficient on 0.3 micron particles will let 30,000 particles pass through the filter for every 100,000 particles that challenge the filter. The ULTRA XV, that is 86% efficient on 0.3 micron particles, will reduce that amount by over 50% to only 14,000 particles. A little difference in efficiency can have a huge impact on the number of airborne particles.

STRENGTH

The strength and durability of a filter is a key performance charac- teristic because resistance and test performance have little value if the filter will not hold up under demanding applications.

Tri-Dim has extensively tested the ULTRA media for strength and durability. The ULTRA XV filter was subjected to a Breach or Burst Strength test - the test consists of the filter being challenged by a combination of water and test dust until air bypass can be detected

- that is filter failure. Traditional V-Bank filters constructed with fiberglass media experience failure at 10” WG but the ULTRA media test was suspended after 25” WG with no air bypass /filter failure documenting the strength of the ULTRA XV.

ULTRA XV

Technical Data

SPECIFICATIONS

Frame Single Header - All Plastic Frame Double Header, Metal Wrap Contains Recylced Content

Efficiency ASHRAE 52.2 (ASHRAE 52.1 Equivalent)

MERV 13 (80-85%)

MERV 15 (90-95%)

MERV 16+ (99%+)

Initial Resistance @ 500 FPM (2.54 m/sec)

MERV 13: 0.21” WG (52 PA)

MERV 15: 0.24” WG (60 PA)

MERV 16: 0.49” WG (122 PA)

Tri-Dim Filter Corporation is committed to continual product development – all descriptions, specifications and performance data are subject to change without notice. Tri-Dim products are manufactured to exacting criteria – there can be a ±5% variance in filter performance.LOCAL REPRESENTATIVE

Tel: 800-458-9835 info@tridim.com tridim.com mann-hummel.com 1900-8 0120 © MANN+HUMMEL GmbH image6.png image7.png image8.png image9.png image10.png image11.png image12.png image13.png image14.png image15.png image16.png image17.png image18.jpeg image19.png image20.png image21.png image22.png image23.png image24.png image25.png image26.png image27.png image28.png image29.png image30.png image31.png image32.png image33.png image1.jpeg image2.png image3.png image4.png image5.png