Attachment 7 MK-41 VLS Standing Instruction 4.5.2021.pdf

PR N00024-22-R-5324

Attachment 7

MK 41 Vertical Launching System Standing Instruction 94-1F

DEPARTMENT OF THE NAVY

PROGRAM EXECUTIVE OFFICER

INTEGRATED WARFARE SYSTEMS

1333 ISAAC HULL AVENUE SE

WASHINGTON, D.C. 20376

Ser IWS 3L/ 29 Oct 2004

MK 41 Vertical Launching System Standing Instruction 94-1F

From: Program Executive Officer for Integrated Warfare Systems

Subj: MK 41 VERTICAL LAUNCHING SYSTEM MARKING FOR TECHNICAL DATA

Ref: (a) MK 41 VLS Standing Instruction 94-1E

(b) MIL-STD-1806

Encl: (1) Distribution Statement Guidelines

1. Purpose: This Standing Instruction revision updates the MK 41 Vertical Launching System (VLS) Standing Instruction containing the policy on the marking of technical data for distribution. This revision reflects the Program Office’s code change from PEO IWS 3A3 to PEO IWS 3L. Therefore, reference (a) is superseded by this revision.

2. Background: Reference (b) requires all Department of Defense technical data be marked with appropriate distribution, export control and destruction statements to secondary distribution.

Since the approval of Standing Instruction 94-1, MIL-STD-1806 has been cancelled, but is used as a guide by PEO IWS 3L.

3. Action: All VLS activities and contractors are to strictly adhere to these guidelines (enclosure (1)) from this date forward.

(a) This instruction is applicable to new documents, revised documents or documents retrieved from file in response to a request for copy. Documents shall not be revised or retrieved from file for the sole purpose of marking. Enclosure (1) supersedes all previous versions.

(b) Questions concerning the specific application of the guideline or acceptable short form versions of the distribution statements shall be addressed to the VLS Technical Direction Agent at the Naval Surface Warfare Center Dahlgren Division. The point of contact is Mike Puig at (540) 653-4078.

IN REPLY REFER TO

PR N00024-18-R-5380

DEPARTMENT OF THE NAVY

PROGRAM EXECUTIVE OFFICER

INTEGRATED WARFARE SYSTEMS

1333 ISAAC HULL AVENUE SE

WASHINGTON, D.C. 20376

Subj: MK 41 VERTICAL LAUNCHING SYSTEM MARKING FOR TECHNICAL DATA

Blind Copy to:

PEO IWS 3L; 3L1; 3L2; 3P1A; 3E2C; 3E2D; 3I1; S

Writer: T. Nguyen, PEO IWS 3L, 703-872-3749 Typist: P. Fenwick, NSWCDD, 540-653-4556

Distribution Statement Guidelines

1 Enclosure (1)

1.0 Technical data generated or duplicated shall be marked in accordance with MIL-STD-1806 with one of the following distribution statements. The distribution statement selection shall be based on the technical data type. The “date of determination" is the date the author or person duplicating the data determined which distribution statement is applicable to the technical data.

1.1 Data Generated During Conceptual or Development Stage or

phase:

DISTRIBUTION STATEMENT E: Distribution authorized to DOD components only: premature dissemination; (Date of Determination). Other requests shall be referred to Program Executive Office, Integrated Warfare Systems (PEO IWS), Attn: PEO

IWS 3L.

WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C.

Sec 2751, ET SEQ). Violations of these export laws are subject to severe criminal penalties. Dissemination in accordance with provisions of DOD Directive 5230.25.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

1.1.1Short Form Marking:

DISTRIBUTION STATEMENT E: DOD components only. Program Executive Office, Integrated Warfare Systems (PEO IWS), Attn: PEO

IWS 3L.

WARNING: Export Controlled.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

1.2 Test and Evaluation Data:

DISTRIBUTION STATEMENT E: Distribution authorized to DOD components only: test and evaluation: (Date of Determination).

Other requests shall be referred to Program Executive Office, Integrated Warfare Systems (PEO IWS), Attn: PEO IWS 3L.

WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C.

Sec 2751, ET SEQ). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

2 Enclosure (1)

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

1.2.1Short Form Marking: Same as 1.1.1

1.3 Data Containing Contractor Performance Information:

DISTRIBUTION STATEMENT E: Distribution authorized to DOD components only: contractor performance evaluation; (Date of Determination). Other requests shall be referred to Program Executive Office, Integrated Warfare Systems (PEO IWS), Attn: PEO

IWS 3L.

WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C.Sec 2751, ET SEQ). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

1.3.1Short Form Marking: Same as 1.1.1

1.4 Data containing proprietary information and not conforming to any other data type listed in this Attachment:

DISTRIBUTION STATEMENT E: Distribution authorized to DOD components only: proprietary information; (Date of Determination). Other requests shall be referred to Program Executive Office, Integrated Warfare Systems (PEO IWS), Attn: PEO

IWS 3L.

WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, ET SEQ). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

1.4.1 Short Form Marking: Same as 1.1.1.

1.5 Data containing proprietary information and not conforming to any other data type listed in this Attachment:

3 Enclosure (1)

Use same distribution statement as item 1.4 above but include additional reason for restricted distribution such as "test and evaluation" based on data type involved.

1.6 Computer math models and analyses, including as a minimum, near miss shock analyses, gas management system analyses, flyout analyses, PHS&T analyses, finite element stress analyses, heat transfer analyses and ablation analyses.

DISTRIBUTION STATEMENT D: Distribution authorized to DOD and DOD contractors only: critical technology; (Date of Determination). Other requests shall be referred to Program Executive Office, Integrated Warfare Systems (PEO IWS), Attn: PEO

IWS 3L.

WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, ET SEQ). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

1.6.1Short Form Marking:

DISTRIBUTION STATEMENT D: DOD and DOD Contractors, Program Executive Office, Integrated Warfare Systems (PEO IWS), ATTN:

PEO IWS 3L.

WARNING - Export Controlled.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

1.7 Assembly, subassembly, schematic, installation and interface drawings, installation test procedures, interface documents, manuals, missile processing documents, technical repair to standards, trade studies, miscellaneous reports and other data:

DISTRIBUTION STATEMENT D: Distribution authorized to DOD and DOD contractors only: administrative or operational use;

(Date. of Determination). Other requests shall be referred to Program Executive Office, Integrated Warfare Systems (PEO IWS), Attn: PEO IWS 3L.

WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C.

Sec 2751, ET SEQ). Violations of these export laws are subject to

4 Enclosure (1) severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

1.7.1Short Form Marking: Same as 1.6.1.

1.8 Commonly available data or data that is already in the

public domain such as nuts, bolts, screws, valves, solenoids, common electrical components, connectors and common structures:

DISTRIBUTION STATEMENT A: Approved for public release;

distribution is unlimited.

1.9 Drawings modifying Military Specification components shall be marked with the same distribution requirement of the source Military Specification. If the Military Specification has no distribution requirement, use Distribution Statement A per item 1.8, above.

1.10 Documents generated for AEGIS foreign military sales and for formal release to foreign government shall include the following statements in addition to the applicable distribution statement above:

DISCLOSURE STATEMENT: This information is furnished upon the condition that it or knowledge of its possession will not be released to another nation without specific authority of the Department of the Navy of the United States; that it will not be used for other than military purposes; that individual or corporate rights originating in the information, whether patented or not, will be respected; that the information will be provided that same degree of security afforded it by the Department of Defense of the United States.

DISSEMINATION STATEMENT: Further dissemination only as directed by U.S. Navy AEGIS Program Manager (PMS400) or higher authority.

1.11 Documents generated for foreign military sales other than AEGIS and for formal release to the foreign government shall include the following statements in addition to the applicable distribution statements above:

DISCLOSURE STATEMENT: This information is furnished upon the condition that it or knowledge of its possession will not be released to another nation without specific authority of the Department of the Navy of the United States; that it will not be

5 Enclosure (1) used for other than military purposes; that individual or corporate rights originating in the information, whether patented or not, will be respected; that the information will be provided the same degree of security afforded it by the Department of Defense of the United States.

1.12 Data generated that is unique to the Evolved SEASPARROW

Missile (ESSM) and does not contain any proprietary information:

DISTRIBUTION STATEMENT F: Distribution authorized to the NATO SEASPARROW Consortium government agencies, DOD components, and ESSM Contractors only. Other requests shall be referred to Program Executive Office, Integrated Warfare Systems, (PEO IWS), Attn: PEO IWS 3L.

WARNING: This document contains technical data whose export is restricted by the Arms Export Control ACT (Title 22, U.S.C. Sec 2751, ET SEQ). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25. This information is furnished upon the condition that it may be released to a nation that is a Participating Government of the NATO SEASPARROW Surface Missile System Project; that it will not be used for other than military purposes; that individual or corporate rights originating in the information, whether patented or not, will be respected; and that it will be provided the same degree of security afforded it by the Department of Defense of the United States.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

1.12.1 Short Form Marking:

DISTRIBUTION STATEMENT F: NATO SEASPARROW Consortium, DOD, and ESSM Contractors only.

WARNING: Export Controlled.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

1.13 Data generated that is unique to the Evolved SEASPARROW

Missile (ESSM) and contains proprietary information:

DISTRIBUTION STATEMENT F: Distribution authorized to the NATO SEASPARROW Consortium government agencies and DOD components only. Proprietary Data (Date of Determination). Other requests

6 Enclosure (1) shall be referred to Program Executive Office, Integrated Warfare Systems (PEO IWS), Attn: PEO IWS 3L.

WARNING: This document contains technical data whose export is restricted by the Arms Export control Act (Title 22, U.S.C. Sec 2751, ET. SEQ). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DOD Directive 5230.25. This information is furnished upon the condition that it may be released to a nation that is a Participating Government of the NATO SEASPARROW Surface Missile System Project; that it will not be used for other than military purposes; that individual or corporate rights originating in the information, whether patented or not, will be respected;

and that it will be provided by the same degree of security afforded it by the Department of Defense of the United States.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Limited Rights Contract No:

Contractor Name: Lockheed Martin Corporation and United Defense L.P.

Contractor Address: (LMC) 2323 Eastern Blvd., Baltimore, MD 21220-4207

(UDLP)4800 East River Road, Minneapolis, MN 55421-1498

The Government’s rights to use, modify, reproduce, release, perform, display or disclose these technical data are restricted by paragraph (b)(3) of Rights in Technical Data – Noncommercial Items clause contained in the above identified contract(s). Any reproduction of technical data or portions thereof marked with this legend must also reproduce the markings. Any person, other then the Government, who has been provided access to such data must promptly notify the above named contractors.

The Government shall have Unlimited Rights in this Lockheed Martin/United Defense L.P. proprietary data after

1.13.1 Proprietary Regions on Drawing are indicated by clouding and calling out the appropriate flag note.

1.13.2 Drawing Flag Noted added to first page that describes

Limited Rights Markings

Indicated regions contain proprietary data and are subject to limited rights markings IAW DFARS 252.227-7013 (f)(1).

1.13.3 Short Form Marking:

7 Enclosure (1)

DISTRIBUTION STATEMENT F: NATO SEASPARROW Consortium, and DOD only.

WARNING: Export Controlled.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

The Government shall have Unlimited Rights in this Lockheed Martin/United Defense L.P. proprietary data after

2.0 Technical data generated or duplicated shall be marked with one of the distribution statements from Section 1.0 of this instruction in the locations specified herein for the types of data specified. For those types of data not specified below, refer to MIL-STD-1806 and MIL-STD-l00E.

2.1 Engineering Drawings and Lists - Long version of

distribution statements on first sheet, short form on all following sheets. Location in accordance with MIL-STD-100E Appendix E.

2.2 Weapon Specifications - Treat as Book Form drawings. Long version of distribution statements on cover sheet only, no marking on follow sheets. Location to be the same as "A" size drawings in accordance with MIL-STD-100E Appendix E.

2.3 Notice of Revision (NOR) - Short version of distribution

statements on all sheets. Location shall be in the bottom margin.

2.4 Specification Change Notice (SCN) - Short version of

distribution statements on all sheets. Location shall be in bottom margin if possible.

2.5 Engineering Change Proposal (ECP) - Short versions of

distribution statements on all sheets. Location shall be in the bottom margin.

2.6 Request for Deviation/Waivers (RFD/RFW) - Short versions of distribution statements on all sheets. Location shall be in the bottom margin.

2.7 Microfilm Aperture Cards - Mark the short version of

distribution statements on the front of each card. There are three available spaces on the front of the card. One of the spaces is allocated for Foreign Government Information, so mark the Export Control Notice in that space. Use one of the two remaining spaces for the distribution statement. It should be noted the distribution statements on the aperture card should agree with those on the image.

8 Enclosure (1)

2.8 Media Marking – Mark the short version of distribution

statements directly on the media via label or marker. Media includes but not limited to CD ROM, Diskette, 4mm tape, etc.

2.9 Electronic Documentation – Electronic files containing

Proprietary information shall be marked in accordance with Contractor Guidelines. When possible, pages containing Proprietary information shall be placed in an Appendix to the base document. Appendix shall be a separate electronic file.