Attachment 5 - Performance Work Statement.pdf

FA4877-20-Q-A379

3 September 2020 Page | 1

Performance Work Statement (PWS) for

Parachute Rigger Support Services

Objective. To provide all equipment, tools, parts, transportation, supervision, and management, in the form of Federal Aviation Administration (FAA) Master riggers and FAA Senior rigger, to perform parachute rigging services and Instruction in support of the rescue squadrons at Davis- Monthan AFB (DMAFB), AZ.

1.0. Description of Services. The contractor shall maintain unit level advanced parachute and Oxygen training equipment, support logistical requirements, and provide courses of instruction to assist in maintaining fully mission capable Aircrew Flight Equipment technicians.

a. Maintain premeditated and cargo parachute systems.

b. Maintain high altitude supplemental oxygen equipment and accessories.

c. Provide courses of instruction to maintain training requirements for all Aircrew Flight

Equipment technicians.

1.1. Tasks

1.1.1. Master Rigger Tasks

a. Perform Military drop zone control officer (DZCO) duties as needed during local jump operations.

b. Maintain high altitude supplemental oxygen systems to include but is not limited to

122 ci supplemental oxygen bottles, Phantom parachutist oxygen mask, and three-cylinder Phantom console.

c. Maintain and repair ancillary equipment, to include night vision devices, altimeters, emergency breathing systems, Self-contained Hybrid Integrated Enhanced Life- Support Device rescue breathing systems, and floatation devices.

d. Assist with rigging of aerial delivery loads, to exclude signature authority to Joint

Acceptance Inspection (JAI) forms or serve as the primary rigger. Prepare, maintain, and building aerial delivery equipment, includes, but is not limited to Rigging Alternate Method Boat (RAMB), Military Razor (MRZR), Advanced Rescue Craft (ARC), Quad, and door bundles.

e. Perform In-Process Inspections (IPI) or Rigger checks for S/L parachute systems

f. Perform In-Process inspections (IPI) or Rigger checks for Ram Air parachute systems

g. Assist lead trainer in performing initial or recurrence training for all personnel within

3 September 2020 Page | 2 the AFE section.

h. Perform Malfunction officer duties during parachute operations.

i. Perform Drop Zone Controller (DZC) duties.

j. Maintain assigned Aircrew Flight Equipment under the direct oversight of an active duty 7-level Aircrew Flight Equipment 1P0X1. Contractor personnel will be considered unqualified until such time they have shown competency on each required task outlined within the shops Master Task Listing (MTL) Contractor task/proficiencies will be documented and maintained within TBA. 100% quality control will be done on all contractors work to ensure the adherence of safety and military regulations.

1.1.2. Senior Rigger Tasks

a. Maintain high altitude supplemental oxygen systems to include but is not limited to 122 ci supplemental oxygen bottles, Phantom parachutist oxygen mask, and three-cylinder Phantom console.

b. Maintain and repair ancillary equipment, to include night vision devices, altimeters, emergency breathing systems, Self-contained Hybrid Integrated Enhanced Life- Support Device rescue breathing systems, and floatation devices.

c. Assist with rigging of aerial delivery loads, to exclude signature authority to Joint

Acceptance Inspection (JAI) forms or serve as the primary rigger. Currently, only active duty personnel can sign off on this equipment. Prepare, maintain, and building aerial delivery equipment, includes, but is not be limited to Rigging Alternate Method Boat (RAMB), Military Razor (MRZR), Advanced Rescue Craft (ARC), Quad, and door bundles.

d. Maintain assigned Aircrew Flight Equipment under the direct oversight of an active duty 7-level Aircrew Flight Equipment 1P0X1 or Master Rigger. Contractor personnel will be considered unqualified until such time that they have shown competency on each required task outlined within the shops Master Task Listing (MTL). Contractor tasks/proficiencies will be documented and maintained within TBA. 100%, quality control will be done on all contractors work to ensure the adherence of safety and military regulations.

1.2. Qualifications

1.2.1. Master Rigger Qualifications

a. Must be a US Citizen IAW AFMAN 11-301v4 para 5.2.2.1.

b. Maintain all Federal Aviation Administration (FAA) requirements, ratings, privileges, 3 September 2020 Page | 3 and performance standards in accordance with Title 14 Code of Federal Regulations (CFR) Chapter I, Subchapter D, Part 65, Subpart F, Section 65.111, 65.113, 65.115, 65.119, 65.125, 65.129, 65.131, and 65.133 for each respective certification and rating.

c. Maintain a 180-day currency on all Static Line parachute systems in line with HAF- AFECM19042 HQ AF/A3TF Policy Message, 1 March 2019, Para 1.1.6.

d. Maintain a 180-day currency on all Ram Air parachute systems in line with HAF- AFECM19042 HQ AF/A3TF Policy Message, 1 March 2019, Para 1.2.5.

e. Must meet qualifications to operate a government vehicle according to AFI 24-301 IAW AFMAN 11-301v4 para 5.2.2.2

f. Passing color vision, as defined by correctly identifying at least 10 of 14 Ishihara

Plates IAW AFMAN 11-301v4 para 5.2.2.3

g. Must be able to speak clearly and distinctly IAW AFMAN 11-301v4 para 5.2.2.4.

h. Must have visual acuity correctable to 20/20 IAW AFMAN 11-301v4 para 5.2.2.5.

i. No record of claustrophobia or claustrophobic tendencies IAW AFMAN 11-301v4 para 5.2.2.6.

j. Must secure/maintain access to the Air Force Network IAW AFMAN 11-301v4 para

5.2.2.7

k. Must be a graduate of one of the following courses: USAF AFE course, Aircrew Life Support (AFSC 1T1X1) and/or Survival Equipment (AFSC 2A7X4) technical training course(s), sister-service equivalent courses (e.g. US Navy Personal Recovery, US Army Aviation Life Support Equipment), FAA certified background or equivalent training/certification.

l. Must have completed or attended one of the following formal training programs:

i. Static Line Parachute Systems, US Army Quartermaster Center & School (USAQMC&S), Ft. Lee, Va., Or Static Line Parachute Systems, 361 TRS, Sheppard AFB, TX.

ii. RAM-Air Course, Ft. Lee, Va., RA-1 NET, or RAM-Air Course Sheppard

AFB, TX.

m. Required certification as FAA Master Rigger with chest and back ratings.

n. Provide documentation of Military Drop Zone Control Officer (DZCO) training

o. Provide documentation to meet In-Process Inspection (IPI) requirements for S/L parachute systems IAW HAF-AFECM19042 HQ AF/A3TF Policy Message, 1 March 2019, Para 1.1.4.1

3 September 2020 Page | 4

p. Provide documentation to meet In-Process Inspection (IPI) requirements for Ram Air parachute systems IAW HAF-AFECM19042 HQ AF/A3TF Policy Message, 1 March 2019, Para 1.2.3.1.

i. 68 RQS requires Master Riggers to be RA-1 qualified through US Army

Quartermaster Center and School either in resident or MTT.

q. Preferred experience with Air Force Special Warfare (AFSPECWAR) Airmen Air Force specialty code (Pararescue, Combat Control, Survival Evasion Resistance Escape, and Tactical Air Control Party) is highly desired.

r. Have certificates of training on all 68 RQS premeditated and cargo parachute systems, to include RA-1 Military Free Fall (MFF), RA-1 Double Bag Static Line (DBSL), RA-1 Bottom Of Container (BOC), T-11R, MC-6, Military Tandem Vector System (MTVS), Military Tandem Tethered Bundle (MTTB), T-10 cargo, G-12 cargo, 15ft extraction, J-1 spotter, Instructor Raider, and Vector 3.

s. Knowledge of Military Free Fall (MFF) and static line (S/L) jump operations.

t. Knowledge/application of Federal Aviation Administration (FAA) Master Rigger experience, competencies and skill requirements. In accordance with 14 CFR Part 65, Subpart F, Section 65.119, 65.125, 65.129, 65.131, and 65.133.

u. Contractor must be physically fit enough to complete the rigorous physical acts of performing recovery, washing, and drying parachutes. Contractor personnel will be required to pack a minimum of four parachute systems a day which will include the ability to carry at least 50 pounds for 50 yards and be able to pull at least 150 pounds on a pulley system.

v. Knowledge/application of USAF aviation flight safety program malfunction, mishap, and incident reporting.

1.2.2. Senior Rigger Qualifications

a. Must be a US Citizen IAW AFMAN 11-301v4 para 5.2.2.1.

b. Maintain all Federal Aviation Administration (FAA) requirements, ratings, privileges, and performance standards in accordance with 14 Code of Federal Regulations (CFR) Part 65, Subpart F, Section 65.111, 65.113, 65.115, 65.119, 65.125, 65.129, 65.131, and

65.133 for each respective certification and rating.

c. Maintain a 180-day currency on all Static Line parachute systems in line with HAF- AFECM19042 HQ AF/A3TF Policy Message, 1 March 2019, Para 1.1.6.

d. Maintain a 180-day currency on all Ram Air parachute systems in line with HAF- AFECM19042 HQ AF/A3TF Policy Message, 1 March 2019, Para 1.2.5.

3 September 2020 Page | 5

e. Must meet qualifications to operate a government vehicle according to AFI 24-301 IAW

AFMAN 11-301v4 para 5.2.2.2

f. Passing color vision, as defined by correctly identifying at least 10 of 14 Ishihara Plates IAW AFMAN 11-301v4 para 5.2.2.3

g. Must be able to speak clearly and distinctly IAW AFMAN 11-301v4 para 5.2.2.4

h. Must have visual acuity correctable to 20/20 IAW AFMAN 11-301v4 para 5.2.2.5

i. No record of claustrophobia or claustrophobic tendencies IAW AFMAN 11-301v4 para 5.2.2.6

j. Must secure/maintain access to the Air Force Network IAW AFMAN 11-301v4 para

5.2.2.7

k. Required Certification as FAA Senior Rigger with chest and back ratings

l. Knowledge of Military Free Fall (MFF) and static line jump operations

m. Knowledge/application of Federal Aviation Administration (FAA) Senior Rigger experience, competencies and skill requirements. In accordance with 14 CFR Part 65, Subpart F, Section 65.115, 65.125, 65.129, 65.131, and 65.133.

n. Contractor must be physically fit enough to complete the rigorous physical act of performing recovery, washing, and drying parachutes. Contractor personnel will be required to pack a minimum of four parachute systems a day which will include the ability to carry at least 50 pounds for 50 yards and be able to pull at least 150 pounds on a pulley system.

2.0 Special Requirements.

2.1. Industrial Security. Contractors will have privileged access to government systems must meet DOD 8570.01M and 5200.02_AFMAN 15-1405 table 2 (T3) security clearance levels. A DD 254 is required. Contractors must hold a minimum of a Secret clearance at time of contract award. The Contract Security Classification Specification (DD Form 254) will encompass all security requirements. All Contractors shall also comply with Operations Security (OPSEC) requirements as set forth in DoD Directive 5205.02E, DoD Operations Security (OPSEC) Program Manual and AFI 10-701, Operations Security. Application and cost for the appropriate Personnel Security Investigation (PSI) shall be the responsibility of the Contractor. If the contractor is notified by any Government official having security cognizance over the contract that an employee’s security clearance has been revoked or suspended, the contractor must notify the Contracting Officer the same day the contractor receives the notice and all access revoked.

2.2. Personnel Clearances. All contractor personnel assigned to this contract must possess and maintain a minimum US Government issued Secret security clearance at contract start. All

3 September 2020 Page | 6 contractor employees under this contract must be US citizens. The contractor may be required to provide employee background information to comply with contract clearance requirements including Common Access Cards (CACs) and building access badges.

2.2.1. Clearance Revocation/Suspension. If the contractor is notified by any Government official having security cognizance over the contract that an employee’s Security Clearance has been revoked or suspended, the contractor must notify the Contracting Officer the same day the contractor receives the notice.

2.3. Contractor Travel. The contractor will be required to travel to various locations within the United States throughout the period of this contract. The purpose of this travel will be, but not limited to, the attendance of training and support of pararescue training courses. All contractor travel must be in accordance with the rate outlined in the Joint Travel Regulation. See para 4.18 for additional information regarding local area travel.

2.3.1. Master Riggers and Senior Riggers may each be required to travel up to an estimated 30 days per year.

2.3.2. Contractor shall invoice for the contracted unit price regardless of actual cost of the trip.

In the event that the actual travel costs exceed the unit cost the contract may submit a request for equitable adjustment to the CO. The request for equitable adjustment shall be supported with thorough documentation of actual costs incurred. Any travel unused by the end of each task order will be partially terminated and de-obligated from the task order.

2.3.3. Unscheduled travel is any travel that is not otherwise included within the CLIN structure of the contract. These instances will be negotiated on a case-by-case basis and will be added to the contract via modification.

3.0. Services Summary.

Performance Objective

PWS

Reference

Performance Threshold

1. Master Rigger - Perform All equipment maintenance IAW applicable T.O, commercial manual or AFI

1.1.1(e);

1.1.1(f);

1.1.1.(n)

No more than 3 minor deficiencies* every quarter

2. Senior Rigger - Perform All equipment maintenance IAW applicable T.O, commercial manual or AFI

1.1.2(d);

1.1.2(h)

No more than 3 minor deficiencies* every quarter

3. Maintain FAA Master Rigger certification in accordance with FAA guidance and regulations, and maintain currency packing requirements.

1.1(a) 100% Compliance

3 September 2020 Page | 7

4. Maintain FAA Senior Rigger certification in accordance with FAA guidance and regulations, and maintain currency packing requirements

1.2(a) 100% Compliance

* A minor discrepancy is defined as an unsatisfactory condition that requires repair or correction, but does not endanger personnel, impact safety of flight, jeopardize equipment reliability or warrant discontinuing a process or equipment operation. A minor discrepancy is one that will not affect the operation of the equipment but prevents the equipment from being 100 percent compliant with current directives.

4.0. General Information

4.1. Government Training. Training incidental to the contract will be provided by the Government to the contractor when the training is unique and available only to Government personnel. Workplace orientation, mission/system familiarization, and standard operational procedures training incidental to the contract will be provided by the Government to the contractor at the place of performance.

4.2. Listing of Employees. The contractor shall maintain a current listing of employees performing services on DMAFB. The list shall include employee's name, social security number, driver’s license number and state of issue, date of birth, and country of citizenship.

Foremen, supervisors, and superintendents must be identified on the list of employees. The contractor shall submit the list to the Contracting Officer and the COR, prior to the contract start date, and submit an updated list when an employee's status or information changes, within 5 working days of the change. The name of any contractor employee that is terminated during the period of the contract must be reported to the Contracting Officer in writing within one workday of the employee’s termination.

4.3 Security Training. All contractor employees shall receive initial and recurring security education training from the Government sponsoring agency’s security manager. Training must be conducted in accordance with DoD 5200.01 V1-V4, Information Security Program, and AFI 31- 1404, Air Force Information Security Program. Contractor personnel who work in Air Force controlled/restricted areas must be trained IAW AFI 31- 101, The Air Force Installation Security Program.

4.4. Antiterrorism Awareness Training. Level I – Antiterrorism (AT) Awareness Training is available to all contractor employees. Non-Common Access Card (CAC) holders can accomplish Level 1 - AT Awareness Training at https://jkodirect.jten.mil/Atlas2/page/login/Login.jsf. Additionally, contractor employees may contact the Government sponsoring agency’s Unit Antiterrorism Representative (UATR) to request Antiterrorism Awareness Training material.

4.5. Reporting Requirements. Contractor personnel shall immediately report to an appropriate Government authority any information or circumstances of which they are aware may pose a threat to the security of Department of Defense personnel, contractor personnel, resources, and classified or unclassified defense information. Contractor personnel are required to review

3 September 2020 Page | 8 suspicious activity reporting procedures. Contact the Government sponsoring agency’s Unit Antiterrorism Representative (UATR) to request Suspicious Activity Reporting training material.

Contact the Base Defense Operation Center (BDOC) to report actual suspicious activity at 520- 228-3200.

4.6. Incident Notification. Contractor personnel with access to a government computer shall update their AtHoc profile with current contact information to ensure receipt of incident notification. Contractor personnel without computer access should be alert for notifications from the base public address system (i.e. Giant Voice). Additional notifications can be received via the Davis-Monthan AFB Facebook Page. In the event of an incident, contractor personnel should adhere to the guidance provided in the Antiterrorism Awareness Training.

4.7. Pass and Identification Items. The contractor shall ensure that all necessary pass and identification items required for contract performance are obtained for contractor employees and non-Government owned vehicles.

4.8. Retrieving Identification Media. The contractor shall retrieve all identification media, including vehicle passes from contractor employees that depart for any reason before the contract expires (e.g. terminated for cause, retirement, etc.) and turn them in to the issuing office. Once contractor employees are no longer employed, the contractor office shall notify the issuing office of the termination immediately.

4.9. Traffic Laws. Contractor employees shall comply with all base traffic regulations.

Contractor employees are subject to random vehicle speed control checks. Contractor personnel cited for speeding on the installation may suffer loss of base driving privileges, debarment from the base, or other administrative action. The use of seat belts is mandatory for all vehicle occupants. The use of cell phones is prohibited while driving on base, unless the phone is a hands-free cell phone.

4.10. Random Personnel and Vehicle Searches. Contractor personnel are subject to random personnel and vehicle searches. If contractor personnel refuse to be searched, they will be denied entry to the base, and may result in loss of base driving privileges, debarment from the base, or other administrative action.

4.11. Weapons, Firearms, and Ammunition. Contractor employees are prohibited from possessing weapons, firearms, or ammunition, on themselves or within their contractor owned vehicle or privately owned vehicle while on Davis-Monthan AFB.

4.12. For Official Use Only (FOUO). The contractor shall comply with DOD 5400.7-R, Chapter 4, DoD Freedom of Information Act (FOIA) Program requirements. This regulation sets policy and procedures for the disclosure of records to the public and for marking, handling, transmitting, and safeguarding FOUO material.

4.13. Physical Security. Contractor employees shall safeguard all Government property and controlled forms incidental to contractor use. At the end of each work period, the contractor shall secure all Government facilities, equipment, and materials. The contractor shall establish

3 September 2020 Page | 9 and implement methods of ensuring all Government lock combinations, are not lost, misplaced, or used by unauthorized persons. The contractor shall prohibit the use of lock combinations, issued by the Government, by any persons other than the contractor’s employees. The contractor shall also prohibit and the opening of locked areas by contractor employees to permit entrance of persons other than contractor employees engaged in performance of contract work requirements in those areas.

4.14. Contractor Personnel Travel on the Installation. All contractor personnel will limit their travel on the installation only to specific areas required for performance of services, specified break and meal areas, or travel directly to and from these locations.

4.15. Controlled/Restricted Areas. The Contractor shall adhere to/implement local base procedures for entry to AF controlled/restricted areas where Contractor personnel work. An AF Form 2586, Unescorted Entry Authorization Certificate, must be completed and signed by the sponsoring agency’s Security Manager before a Restricted Area Badge will be issued.

Contractor employees must have a favorably completed National Agency Check plus written Inquires (NACI) investigation before receiving a Restricted Area Badge. Interim access can be granted in accordance with AFI 31-501, Personnel Security Program Management.

4.16. Key Control. The contractor shall establish and implement methods of making sure all keys/combinations issued to the contractor by the government are not lost or misplaced and are not used by unauthorized persons. The contractor shall not duplicate any keys issued by the Government. The contractor shall immediately report to the COR or Contracting Officer any occurrences of lost or duplicated keys. In the event keys, other than master keys, are lost or duplicated, the contractor may be required, upon written direction of the Contracting Officer, to re- key or replace the affected lock or locks without cost to the Government. The Government may, however, at its option, replace the affected lock or locks or perform re-keying and deduct the cost of such from the monthly payment due the contractor. In the event a master key is lost or duplicated, the Government shall replace all locks and keys for that system, and the total cost will be deducted from the monthly payment due the contractor.

4.16.1. The contractor shall prohibit the use of keys and/or cipher lock combinations, issued by DMAFB, by any persons other than the contractor’s employees and the opening of locked areas by contractor employees to permit entrance of persons other than contractor employees engaged in performance of contract work requirements in those areas.

4.16.2. The contractor shall control access to all contract incidental lock combinations to preclude unauthorized entry. The contractor is not authorized to record lock combinations without written approval by the COR. Records with written combinations to authorized secure storage containers, secure storage rooms, or certified vaults, shall be marked and safeguarded at the highest classification level as the classified material maintained inside the approved containers.

4.17. Privacy Act. The Contractor shall ensure that its employees fully understand and comply with Title 5 of US Code, Section 552.a and DOD 5400.7-R, DoD Freedom of Information Act Program. These procedures must be followed to identify and safeguard reports and data

3 September 2020 Page | 10 accordingly. The contractor will ensure that Contractor employees are briefed annually on properly identifying and handling Privacy Act data/information.

4.17.1. Protection of Personally Identifiable Information. Personally Identifiable Information (PII) refers to information that can be used to distinguish or trace an individual’s identity either alone or when combined with other information that is linked or linkable to a specific individual.

PII may range from common data elements such as names, addresses, dates of birth, and places of employment, to identity documents, Social Security numbers (SSN) or other government-issued identity, precise location information, medical history, and biometrics. Contractor personnel shall protect all PII encountered in the performance of services in accordance with Department of Defense Directive 5400.11, Department of Defense Privacy Program, and DOD 5400.11-R, Department of Defense Privacy Program. If a PII breach results from the contractor's violation of the aforementioned policies, the contractor shall bear all notification costs, call-center support costs, and credit monitoring service costs for all individuals who's PII has been compromised.

4.18. Place of Performance. The contractor shall primarily perform services on Davis-Monthan AFB. However, the contractor may also be asked to perform services within the local area. For this contract the local area is defined as any location where services can be rendered and the contracted employee can return to the greater Tucson area in the same day. An example of potential local area travel may include jump operations in Marana, AZ or a one day training event in Eloy, AZ. Contractor is responsible for travel to and from any local area location.

Local area travel will not be reimbursed by the Government.

4.19. Duty Hours. Contractor employee’s hours of work shall be 8 hours per day, 40 hours per week, during normal duty hours of 7:00 a.m. – 4:00 p.m., Monday through Friday, unless otherwise specified IAW para. 4.20.1 of this PWS.

4.19.1. Flex Hours. Support may be needed outside of the normal duty hours outlined in para.

4.20 of this PWS. Flex hours will be on a case-by-case basis and will conform to a schedule that is agreed upon between the COR and contractor. Flex hour schedules shall not exceed 40 hours a week and shall only be used to accommodate mission requirements.

4.19.2. Overtime Hours. Overtime hours are authorized for necessary support during 5-Level and 7-Level courses. Contracted employees may be asked to work up to 4 hours of overtime per day during these courses. All overtime must be approved by the CO prior to performance.

Maximum effort shall be made to make a flex schedule work prior to overtime hours being approved.

4.20. Programmed Absences. The contractor’s Contract Manager shall notify the COR at least two weeks in advance for employee programmed absences. The Contract Manager shall also notify the COR when contractor employees will be absent for appointments, prior to the appointment dates. Contractor employee absences do not relieve the contractor’s responsibility for providing all contract services.

4.20.1. Medical and Emergency Absences. In the event a contractor employee cannot perform

3 September 2020 Page | 11 services due to medical reasons or an emergency, the contractor’s Contract Manager shall notify the COR, within three hours of contractor employee start time. The Contract Manager will provide an estimated return date for the contractor employee.

4.21. Federal Holidays. The Federal Government observes the following holidays. (Note: If the holiday falls on a Saturday then the holiday will be observed as recognized by the Federal Government). The contractor shall not normally be required to provide routine services on holidays, or the actual day set aside for observation.

New Year’s Day Labor Day Martin Luther King’s Birthday Columbus Day President’s Day Veteran’s Day Memorial Day Thanksgiving Day Independence Day Christmas Day

4.22. Contractor Employee Appearance. Contractor employees shall present a professional, conservative, and neat appearance. Contractor personnel shall report for duty in a professional manner, in appropriate attire befitting the work environment, and have complied with socially acceptable standards of personal hygiene. While performing services, contractor employees shall be neat and clean (free of visible dirt and stains), well-groomed and appropriately dressed.

The contractor employee's clothing shall fit correctly to provide a professional, modest appearance, in keeping with normally accepted commercial standards of dress for the work being performed.

4.23. Communication. Contractor employees shall maintain open, professional, and respectful communication with Government personnel (military and civilian) and other contractor employees. The COR will report valid complaints in writing to the CO for action. Valid complaints will be considered a performance failure. The contractor shall resolve all substantiated complaints immediately upon notification of the complaint. Contractor employees are required to identify themselves as a contractor at all times while on the job, (e.g. in the workplace, when attending meetings, when answering Government telephones, in e-mails, or when making phone calls on behalf of the Government).

4.24. Applicable Publications

Publication Number Publication Name Publication

Date Applicable

Paragraph or Chapter

AFI 11-410 Personnel Parachute Operations 4 Aug 08 All

3 September 2020 Page | 12

AFMAN 11-411

Special Forces

Military Free-Fall Operations

1 Jan 05 All

AFMAN 11-420

Static Line Parachuting

Techniques and Tactics

23 Sep 03 All

AFI 11-301v1 Aircrew Flight Equipment 10 Oct 17 All

AFI 11-301v5 Aircrew Flight

Equipment Career Field Development

9 Jul 15 Chapter 5

AFMAN 11-

301v4

Aircrew Flight Equipment Career Field Development

13 Aug 20 Chapter 5

AFI 36-2651 Air Force Training Program 3 Jan 19 Chapter 6

HAF-

AFECM19042

HQ AF/A3TF

Policy Message

AFE Pre-Meditated Parachute support guidance 1 Mar 19 All

4.25 Applicable Forms

Form Number Form Name Publication Date

AF Form 623A On-The-Job Training Record Continuation Sheet 1 Mar 79

AF Form 797A Job Qualification Standard Continuation/Command JQS 1 Aug 02

AF Form 803A Report of Task Evaluations 1 Jun 84

All applicable publications, AFMANs, AFIs, and forms can be found at:

https://www.e-publishing.af.mil/Product-Index/

Any other applicable memos or publications not found at the website listed above will be provided by the Government upon request from the contractor and/or contractor personnel.

5.0. Items and Services Incidental to Contract

5.1. Office Space, Supplies, and Equipment. Items and office space incidental to the contract such as: office supplies, computer equipment, access to military LAN services (unclassified), https://www.e-publishing.af.mil/Product-Index/

3 September 2020 Page | 13 telephone and fax (local, Defense Switch Network (DSN), and long distance) commensurate with local unit policies, electronic mail, office automation software, LAN support, and reproduction facilities, will be provided by the Government. Use of the LAN and telephone is subject to monitoring at all times, and use constitutes consent to monitoring.

5.2. Contractor Information Access. Access to relevant Government organizations, information and documentation, manuals, texts, briefs, and associated materials as required and available, that are incidental to the contract, will be provided by the Government. All materials will remain the property of the Government and will be returned to the COR upon request or at the end of the period of performance.

5.3. Government E-Mail Access. Government e-mail access through the Local Area Network (LAN) is incidental to the contract and will be provided by the Government. The contractor shall use e- mail "for official use only" and in accordance with AFI 17-130, Air Force Cybersecurity Program Management. The contractor shall not access any other e-mail system on Government computers. The contractor is advised that e-mail use is subject to monitoring.

5.4. Telephone Services. Use of telephones for the transmission of official Government information only; including local, CONUS-wide and overseas calls through standard Government assets via Digital Switching Network (DSN) and access to FTS-2000 is incidental to the contract and for official use only. The contractor shall not use Government telephones to transact personal business. The Government is not responsible for charges for collect calls accepted by contractor employees. The use of Government phones by the contractor constitutes consent to monitoring.

5.5. Emergency Services. Security Forces services (call (520) 228-4444 for emergencies only), and fire protection services (call (520) 228-3333) are incidental to the contract and will be provided by the Government. There is no emergency room on DMAFB, therefore contractor personnel shall call (520) 228-3333 for medical emergencies.

5.6. Recycling Program. Base recycling services are incidental to the contract and the contractor is required to participate in the base-recycling program.