Attachment-3 Technical Capability Factors.pdf

Attachment-3: TECHNICAL CAPABILITY FACTORS

USCGC SEA DRAGON DOCKSIDE FY20

Solicitation #:70Z080-20-Q-PV1978100

PLEASE SUBMIT ALL REQUIRED INFORMATION LISTED BELOW AS A SEPARATE

EMAIL WITH ATTACHMENTS.

Technical Evaluation Factors

1. Technical Approach

Submit a brief overview planning document using any means (computer generated, hand written, etc.) that outlines the strategy for ensuring that this requirement is completed on or before the contract completion date. The planning document shall include at least:

1) Proposed schedule, resources, completion-dates, float, and major millstones for the various tasks required to complete this contract and

2) Identify a list of items that may pose the most contract schedule risk and approach to mitigate or eliminate each risk.

3) Capture schedule coordination with USCG-hired contractors to provide access in order to perform the work outlined in General Requirements, Paragraph 1.1.2.

NOTE: Negative responses are required for any items listed above that the contractor does not identify (i.e. schedule risk).

2. Coatings Certification Requirements

Submit a description of how you intend to meet SFLC Standard Specification 0000 coatings QC/QA requirements for this contract. This plan must include the names of any subcontractors and resumes for any proposed QP1 certified painters and/or independent NACE CIP Level 3 inspectors.

3. Watertight Closure Assessment Qualification Requirements

Submit documentation describing prior experience with repairing and/or grooming watertight hull fittings to include doors, hatches and scuttles, both individually dogged and quick-acting styles. Describe frequently used techniques for alignment and establishing a watertight seal.

4. Thermographic Inspection Certifications/Qualifications

Submit documentation indicating that an employee or subcontractor performing the work possesses a current "ANSI/ASNT LEVEL I certification (or higher) meeting SNT-TC-1A: Personnel Qualification and Certification in Nondestructive Testing", and/or any other relevant job experience or skills that indicate adequate qualifications for performing the work.

5. Structural Experience

Submit corporate experience and/or credentials in conducting major structural repairs repairs/installs on DOD and USCG surface vessels over the past three years. This contract requires extensive knowledge and experience with complex structural repairs. It is imperative that the contractor provide details about experience of key personnel within their workforce who may be performing these complex repairs.

Attachment-3: TECHNICAL CAPABILITY FACTORS

USCGC SEA DRAGON DOCKSIDE FY20

Solicitation #:70Z080-20-Q-PV1978100

PLEASE SUBMIT ALL REQUIRED INFORMATION LISTED BELOW AS A SEPARATE

EMAIL WITH ATTACHMENTS.

6. Electrical/Electronics Experience

Submit corporate experience and/or credentials in conducting major electrical/electronics repairs/installs on DOD and USCG surface vessels over the past three years. This contract requires extensive knowledge and experience with electrical/ electronics systems. It is imperative that the contractor provide details about experience of key personnel within their workforce who may be performing these complex repairs.

7. Welding Certifications/Procedures

Submit welding documentation (e.g. WPSs, welder certs, etc.) in accordance with SFLC Standard Specification 0740, specific to your internal or subcontracted staff for the weld joints that will be installed.

**IMPORTANT NOTE:

ANY INCOMPLETE OR MISSING TECHNICAL INFORMATION AS REQUIRED AND DESCRIBED WITHIN EACH TECHNICAL FACTOR LISTED ABOVE WILL BE CONSIDERED INCOMPLETE AND MAY NOT BE CONSIDERED

FOR AWARD.