Attachment 3 Target MS HiPiMS 1200 (monobloc target).pdf

48 KB Posted

Attached to
Chrome Targets
Solicitation number
2031ZA25Q00196
Issued by

About this file

Written by GovTribe AI ·

This is a technical drawing (engineering design document) for a Monobloc Target, dated 08-03-21, drawn at a 1:2 scale on an A3 sheet. The technical drawing specifies precise dimensional requirements, with key measurements including a length of 402 (-0.3) mm and a height of 131 (-0.2) mm. The document includes detailed technical specifications such as angle tolerances of 0 30', general fabrication tolerances ranging from ±0.2 to ±0.005, and a specific requirement that the initial surface state must be free from indentations, gouges, and scratches. The drawing is part of a technical specification for a target component, likely related to the Department of the Treasury Bureau of Engraving and Printing's solicitation for Chrome Targets (Solicitation Number: 2031ZA25Q00196).

View the file

Other files

File Type Posted
Attachment 1 SOW Chrome Targets.doc DOC document
Chrome Targets 2031ZA25Q00196 Combined Synopsis Solicitation Notice v.3.docx DOCX document
Attachment 2 Price Schedule.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

1 2 3 4 5 6 7 8 9 10 11 12

H

1 2 3 4 5 6 7 8 9 10 11 12

D

G

F

E

A

C

B

D

G

F

E

A

C

B

H

FIRST ANGLE

DATE

DRAWING NUMBER

DRAWN BY

ORIGINAL SCALE

MATERIAL SPECIFICATION

CHECK DATE

MAKE FROM

TREATMENT/HARDNESS/FINISH

SUPPLIER TYPE 0.2

INITIAL STATE OF SURFACE MUST

BE FREE FROM INDENTATIONS,

GOUGES AND SCRATCHES.

ANGLE TOLERANCES 0 30'

ALL HOLES

UNLESS STATED OTHERWISE.

DESCRIPTION

CHECKED BY DESIGN APPROVED BY APPROVAL DATE REVISION

PERMITTED GENERAL

TOLERANCES UNLESS

OTHERWISE STATED;

FABRICATIONS 1

0. 0.2 .0 0.1

.00 0.05 .000 0.005

ORIGINAL SHEET SIZE

ALL DIMENSIONS EXPRESSED

IN mm UNLESS

OTHERWISE STATED.

3.2 6.4

402 -0.3

-0

.2

1:2 08-03-21

A3 MONOBLOC TARGETSEE_NOTE

DO NOT SCALE SHEET 1 OF 1

An.a. n.a. n.a. n.a.

ISSUE AUTHOR DETAIL OF CHANGE ECO REF DATE

A FOR ISSUE ~ n.a.

Sheet 1
Views
new_view_1
bottom_2
Zones
A1

File details come from the government source that posted it. Updated .