Attachment 3 Target MS HiPiMS 1200 (monobloc target).pdf
PDF 48 KB Posted
- Attached to
- Chrome Targets
- Solicitation number
- 2031ZA25Q00174
About this file
This is a technical drawing for a Monobloc Target, dated 08-03-21, drawn in the First Angle projection method at a 1:2 scale. The technical specification indicates precise dimensional tolerances for a rectangular component with key measurements of 402 mm (-0.3) in length and 131 mm (-0.2) in width. The drawing specifies surface preparation requirements, noting that the initial state of the surface must be free from indentations, gouges, and scratches, with angle tolerances of 0 30'. The document is formatted on an A3 sheet size and includes standard engineering drawing conventions for fabrication tolerances, material specifications, and dimensional accuracy.
The drawing appears to be an attachment to a federal contract opportunity (Solicitation Number: 2031ZA25Q00174) for Chrome Targets issued by the Department of the Treasury Bureau of Engraving and Printing. The technical drawing provides detailed manufacturing specifications for a monobloc target, which is likely a critical component for the procurement described in the associated solicitation. The precise engineering details suggest this is a technical specification for a specialized manufacturing or production requirement within the federal contract opportunity.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1 SOW Chrome Targets.doc | DOC document | |
| Attachment 2 Price Schedule.docx | DOCX document | |
| Chrome Targets 2031ZA25Q00174 Combined Synopsis Solicitation Notice v.2.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1 2 3 4 5 6 7 8 9 10 11 12
H
1 2 3 4 5 6 7 8 9 10 11 12
D
G
F
E
A
C
B
D
G
F
E
A
C
B
H
FIRST ANGLE
DATE
DRAWING NUMBER
DRAWN BY
ORIGINAL SCALE
MATERIAL SPECIFICATION
CHECK DATE
MAKE FROM
TREATMENT/HARDNESS/FINISH
SUPPLIER TYPE 0.2
INITIAL STATE OF SURFACE MUST
BE FREE FROM INDENTATIONS,
GOUGES AND SCRATCHES.
ANGLE TOLERANCES 0 30'
ALL HOLES
UNLESS STATED OTHERWISE.
DESCRIPTION
CHECKED BY DESIGN APPROVED BY APPROVAL DATE REVISION
PERMITTED GENERAL
TOLERANCES UNLESS
OTHERWISE STATED;
FABRICATIONS 1
0. 0.2 .0 0.1
.00 0.05 .000 0.005
ORIGINAL SHEET SIZE
ALL DIMENSIONS EXPRESSED
IN mm UNLESS
OTHERWISE STATED.
3.2 6.4
402 -0.3
-0
.2
1:2 08-03-21
A3 MONOBLOC TARGETSEE_NOTE
DO NOT SCALE SHEET 1 OF 1
An.a. n.a. n.a. n.a.
ISSUE AUTHOR DETAIL OF CHANGE ECO REF DATE
A FOR ISSUE ~ n.a.
| Sheet 1 |
| Views |
| new_view_1 |
| bottom_2 |
| Zones |
| A1 |
File details come from the government source that posted it. Updated .