Attachment 3 - SPI AK12770060.pdf
PDF 373 KB Posted
- Attached to
- SPI Containers for DDAA - SP3300-26-Q-0089 Federal contract opportunity
- Solicitation number
- SP3300-26-Q-0089
- Issued by
- Defense Logistics Agency Distribution
About this file
This is a DD Form 2169 Special Packaging Instruction document for a Lifting Mechanism (National Stock No. 2590-01-277-0060, Part No. 13228E5988, CAGE 97403, Revision C, dated 8/11/2023). The document specifies detailed packaging, preservation, and shipping requirements for this single unit item, which weighs 315 pounds and measures 40.5 x 16.5 x 21.5 inches when packed.
The packaging specification requires military preservation per MIL-STD-2073-1 Method 20, including: cleaning per 1-B procedure, application of MIL-PRF-32033 preservative to bare ferrous surfaces, wrapping per MIL-PRF-121 Type II in 14 x 12 size, drying per 3-D procedure (5 steps), and blocking and bracing shown on pages 2 and 3. The item must be packed in an ASTM D6880 Class 2 Style 2 modified container (37 x 14.5 x 18 inches) constructed with 1-inch nominal lumber for sides and ends, 2-inch lumber for bottom, and 3/4-inch plywood per A-A-55057 for top, supported by two 3 x 4 nominal x 16.5-inch skids. Packing requires nailing blockings 2A and 2B to the container base, positioning the lifting mechanism on blockings 2B, drilling four 1/2-inch bolt holes through multiple layers, and securing with 1/2-inch carriage bolts, washers, and nuts. The container must be closed and banded per ASTM D6880 and serves as the shipping container. Marking must comply with MIL-STD-129, and all preservation, unit pack, and packing inspections must follow MIL-STD-2073-1 and MIL-STD-1186 standards.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 5 - Photos of AM13046100.pdf | ||
| SP3300-26-Q-0089 Amendment 0002.pdf | ||
| SP3300-26-Q-0089 Amendment 0001.pdf | ||
| Attachment 1 - SPI AK13390029 RevC.pdf | ||
| CSS SP3300-26-Q-0089.pdf | ||
| Attachment 4 - SPI AM13046100.pdf | ||
| Attachment 2 - SPI AK13192899.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3
0BSPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BT
EMR
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, Gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of Information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB Control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
13228E5988 (97403) LIFTING MECHANISM 19207 AK12770060
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2590-01-277-0060 8/11/2023
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 315.0 8.315 40.5 X 16.5 X 21.5
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1, METHOD 20
13. CLEANING 1-B A/R PRESERVATIVE: MIL-PRF-32033
MIL-STD-2073-1 2-C 1 WRAP: MIL-PRF-121, TY II, SIZE: 14 X 12
14. DRYING 3-D 5 BLOCKING AND BRACING: SHOWN ON PAGES 2 AND 3
MIL-STD-2073-1 4-E 1 CONTAINER: ASTM D6880, CLASS 2, STYLE 2, (MOD.),
15. PACKING
a. LEVEL A
MIL-STD-2073-1 & NOTE F
b. LEVEL B
NONE
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. APPLY PRESERVATIVE TO BARE FERROUS SURFACES OF ITEM.
C. WRAP SHAFT AND SECURE USING TAPE.
D. NAIL BLOCKINGS 2A AND 2B TO BASE OF CONTAINER (SEE FIGURE 1). POSITION LIFTING MECHANISM ON BLOCKINGS 2B WITH MOUNTING FLANGE BETWEEN BLOCKING 2A AND 2B (SEE FIGURE 2). DRILL HOLES FOR 1/2-INCH BOLTS 3A (4 PLACES) THROUGH BLOCKINGS 2B, 2C, CONTAINER BOTTOM, AND SKIDS. PLACE BLOCKINGS 2C OVER LIFTING MECHANISM (FIGURE 2). SECURE IN PLACE WITH BOLTS
3A, WASHERS 4A, AND NUTS 5A (4 PLACES) SHOWN IN (FIGURE 2).
E. CONTAINER IS MODIFIED USING NOMINAL 1-INCH LUMBER FOR SIDES AND ENDS, 2-INCH FOR BOTTOM, AND A-A-55057 3/4-INCH THICK PLYWOOD FOR TOP. TWO SKIDS 3 X 4 NOMINAL X 16-1/2 ARE REQUIRED.
CLOSE AND BAND CONTAINER IN ACCORDANCE WITH ASTM D6880.
F. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
SIZE: 37 X 14-1/2 X 18
C
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
13228E5988 (97403) LIFTING MECHANISM 19207 AK12770060
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2590-01-277-0060 8/11/2023
17. NOTES/DRAWING
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
13228E5988 (97403) LIFTING MECHANISM 19207 AK12770060
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2590-01-277-0060 8/11/2023
17. NOTES/DRAWING
SPECIAL PACKAGING INSTRUCTION
File details come from the government source that posted it. Updated .