Attachment_3_Salient_Characteristics.pdf
PDF 219 KB Posted
- Attached to
- Quantity 1 Resin 3D Printer Federal contract opportunity
- Solicitation number
- 140G0124Q0008
About this file
This document outlines the salient characteristics for a three-dimensional (3D) printer system consisting of a resin-based 3D printer, wash station, and curing system. The system must be capable of printing prototype and functional parts at resolutions up to 7K in various resin materials with layer thicknesses between 50-200 microns. Additional requirements include a build volume over 10.5x6x15.5 inches, print speeds up to 1Z cm/sec, and compatibility with STL file formats. The vendor must also provide installation, training services at the USGS facility in Tuscaloosa, AL, and an optional yearly service/maintenance contract covering priority support, preventative maintenance, upgrades, and recalibration. The related federal contract opportunity is from the Department of the Interior USGS Office of Acquisitions and Grants to procure one resin 3D printer system under solicitation 140G0124Q0008.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment_1_508_Compliance.pdf | ||
| Attachment_2_FISMA.pdf | ||
| Sol_140G0124Q0008.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics H24002
Three-Dimensional (3D) Printer (Resin-Based)
Salient Characteristics:
System shall consist of a 3D resin-based printer, wash station, and curing system.
3D Printer (Resin-Based):
1. Shall consist of an industrial grade, resin-based, high-speed, photopolymer, three-dimensional (3D) printer system.
2. Shall be capable of printing prototype and functional parts.
3. Shall include technology that allows printing an object without lifting the build platform for adding resin.
4. Shall include a built-in touchscreen user interface.
5. Shall have a build volume of at least 10.5” x 6” x 15.5.”
6. Shall be capable of printing layers at 4K resolution with a pixel pitch of 76.5 microns (0.0030”), or better.
7. Shall be capable of XY layer resolution of 75 microns and Z layer resolution of 50-200 microns (0.0019-
0,0080”), or better.
8. Shall be capable of printing at a resolution of 7K (6,480 x 3,600) or better.
9. Shall be capable of printing speeds up to 1Z cm/sec.
10. Shall have a vertical speed of 24 cm/hour (9.4”/hr.), or better.
11. Shall include Ethernet and Wi-Fi communications and a USB port.
12. Shall be capable of an automated resin replenishment.
13. Shall be capable of being powered from 100-120 VAC power source.
14. Shall support STL input file formats.
15. Shall be capable of printing a variety of resin 3D printing materials including, but not limited to, xPEEK, xABS, xFLEX, xGPP (Blue, Transparent, Grey), xCE (Black, White), xMED, xCAST, and xABS3843-Black.
16. Shall be no larger than 30” x 30” x 70”.
17. Shall be capable of complete light uniformity across entire build area.
18. Shall include compatible 3D printing software, with features listed below, for preparing and managing prints.
• Setting parameters for layers, cure times, and resin system setup
• 3D model duplication, manipulation, and editing
• Importing CAD data in STL formats
• File analysis and repair
• Geometry algorithms with end-to-end workflows
• Remote management with live print view
• Slicer features and functionality
• Sending jobs to the printer
• File management and automated report generation
19. Shall be provided with all essential accessories for operating the system including, but not limed to, resin vat, power cable, USB drive, and applicable tools and parts.
Wash Station:
20. Shall consist of a post-processing wash system that is compatible with the 3D printer described above.
21. Shall have the same volume as the printer described above.
Salient Characteristics H24002
22. Shall include features to safeguard against chemical exposure and reduce solvent evaporation.
23. Shall include a touch screen interface with color display.
24. Shall have adjustable cleaning cycle time and cleaner saturation timer.
25. Shall have variable bi-directional speed stirrer agitation.
26. Shall have dedicated drain and fill ports.
27. Shall be capable of being powered from 110/240 VAC power.
Curing System:
28. Shall consist of a post-processing curing system that is compatible with the 3D printer described above.
29. Shall accommodate parts up to 16 liters in volume.
30. Shall be capable of being powered from 100/120 VAC power.
31. Shall include multiple dual wavelength LED’s capable of providing 360o coverage.
32. Shall include an LCD display interface.
33. Shall include profile settings for various resins.
34. Shall have 30 – 60o heating capacity with 1o increments.
35. Shall include optional curing functions such as light only, heat only, or light/heat combination.
36. Shall support up to 3 build plates at a time.
1 EA. Installation and Training Services:
37. The vendor shall provide installation and training services at the U.S. Government facility in Tuscaloosa, AL.
38. The vendor shall setup, install, assemble, adjust, calibrate the system, or perform other setup functions as necessary for proper system operational performance.
39. The vendor shall provide on-site training for 2 days for up to 3 operators. Training, at a minimum, shall cover system use, system setup, part setup/verification, programming, operation, and general maintenance.
1 EA. Optional Yearly Service/Maintenance Contract:
40. The vendor shall offer a yearly optional service/maintenance contract.
41. Contract shall cover, but not be limited to, such service/maintenance as,
- priority on-site support service and response time
- unlimited phone and email support,
- scheduled preventive maintenance,
- application remote support,
- software and hardware upgrades,
- cleaning, adjusting, replacing nozzles and tubes, as applicable,
- inspecting moving parts (bearings, rails, rods, etc., for wear, as applicable,
- lubricating parts as needed,
- updating firmware and software as applicable,
- adjusting belts as applicable,
- recalibrating the system as needed.
File details come from the government source that posted it. Updated .