Attachment 3 Regular Aluminum Specs.pdf

PDF 246 KB Posted

Attached to
Coiled Aluminum - CCi
Solicitation number
RFP CFAA 2027000091 2
Issued by
Garfield County, Colorado

About this file

This attachment contains aluminum specifications for license plate material required by Colorado Correctional Industries, a state agency under the supervision of Supervisor Lucas Crocker in Canon City, Colorado. The document specifies detailed technical requirements for regular plate aluminum in coil form, including alloy type 3105H21 at 21 gauge thickness (.027"), coil width of 11.98 to 12.00 inches, ultimate strength of 17,500 to 20,500 PSI, and minimum yield strength of 13,000 to 18,000 PSI. The aluminum must withstand embossing with steel dies to a height of .09375 inches without damage, demonstrate minimum elongation of 16% on standard specimens, and comply with Bonderite M-CR 1430 C pretreatment and ASTM specification B-449-Class 2 surface finish requirements. Delivery requirements specify three truckloads of approximately 37,000 pounds each per month until the order is filled, with receiving limited to Monday through Thursday, barring state holidays. The document indicates an order completion date of September 22, 2026.

The specifications establish strict packaging and handling requirements, including 20-inch diameter cores with outside coil diameters not exceeding 45 inches, individual coil weights not to exceed 1,500 pounds, and secure banding to prevent telescoping and moisture exposure during transit. Coils must be free from edge damage caused by cables, forklifts, or cutting dies and must unwind clockwise when placed on pallets. The conversion coating weight is specified at 35 milligrams per square foot maximum with an optimum median of 25 milligrams per square foot. No pricing terms, set-asides, incumbent information, or funding sources are included in this technical specifications document.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Lucas Crocker • Colorado Correctional Industries • Supervisor III Tag / Tab / Sign 275 West Highway 50 • Cañon City, CO 81212

Phone: (719) 269-4205 • Fax: (719) 269-4238 • email: lucas.crocker@state.co.us

ATTACHMENT 3

REGULAR PLATE ALUMINUM SPECIFICATIONS

License Plate Aluminum, coiled, specifications as follows:

• Alloy type is 3105H21

• Thickness is 21 gauge (.027")

• Coil width is 11.98 to 12.00

• Ultimate strength 17,500 to 20,500 PSI

• Minimum yield strength 13,000 to 18,000 PSI

• Elongation on .0625 standard specimen: minimum 16% (20% nominal)

• Must withstand embossing with all steel dies to a height of .09375" without breaking, cutting, surface tearing, or plate warping.

• Pretreatment: Bonderite M-CR 1430 C.

• Surface finish: conversion coating in conformance with ASTM specification B-449-Class 2

(or as revised); free from any powdery residue, oil, or other substance which might affect adhesion of reflective sheeting; coating weight to 35mg. /sq. ft. with a median of 25 mg./sq. ft. as the optimum.

• Packaging: coils to have 20" diameter cores, with outside coil diameter not to exceed 45", coil weight not to exceed 1,500 lbs, each coil securely banded around the circumference and through the inside core to prevent telescoping, coils laid on their side and banded in pairs and separated by 2" x 2" wood spacers, and packaged to prevent exposure to moisture and foreign material while in transit.

• Coils shall be free from edge damage such as is caused by cables, forklifts, dull cutting dies, rough separator disc, and/or other causes that result in rough, wavy, or damaged edges.

• Aluminum shall be coiled straight and reasonably tight with no more than 1/16" interweave.

• All coils must unwind clockwise when placed on pallets.

• Receiving days are Monday-Thursday ONLY, barring state holidays.

• Delivery of 3 truckloads of approximately 37,000 lbs. each per month until order is filled.

9.22.2026

File details come from the government source that posted it. Updated .