Attachment 3 - Item 2 Specifications.pdf

This file contains technical specifications for equipment procurement, specifically a compact tractor with front-end loader and backhoe attachments. The specifications are organized into three sections detailing required capabilities and features.

The tractor specifications require a 35-43 horsepower diesel engine with hydrostatic transmission featuring three ranges and auto throttle, tilt steering wheel, 9-12 gallon fuel tank, and flat deck design. Critical hydraulic specifications include a steering pump capacity of 4.4 GPM and implement pump capacity of 6.1 GPM. The tractor must include a CAT1 three-point hitch with two mechanical adjustable side links and a critical requirement of 2500-2800 lbs lift capacity. Additional requirements include R4 industrial tires for front and rear, minimum 12 inches ground clearance, and a mid-mound loader control valve. The loader attachment specifications require maximum lift height of 101-105 inches with a critical lift capacity to maximum height of 2000-2200 lbs at the pivot pin. The loader must provide breakout force of 3200-3500 lbs at ground level and include a hydraulic third function kit (designated as critical need), skid steer coupler, 60-70 inch bucket, and bolt-on cutting edge. The backhoe specifications require a ladder frame mount with 16-18 inch tooth bucket, 7-8 feet dig depth with 2 feet flat bottom pull, separate seat mounted to the backhoe unit, 180 degree swing arc, minimum 125 inches reach from pivot pin, bucket breakout force of 2500-2800 lbs, and dipper stick force of 2000-2200 lbs.