Attachment_3_Contract_Data_Item_List.pdf

CONTRACT DATA REQUIREMENTS LIST

(CDRL)

GENERAL INSTRUCTIONS

FOR THE

AIRCREW FLIGHT EQUIPMENT TEST EQUIPMENT (AFETE)

PRODUCTION AND REPAIR

REPAIR PR Number: FD2060-21-30612

PRODUCTION PR Number: FD2060-21-32351

DATED: 12 June 2023

PREPARED BY:

AGILE COMBAT SUPPORT-AFLCMC/WNU, SUSTAINMENT

HUMAN SYSTEMS DIVISION

ROBINS AIR FORCE BASE, GEORGIA 31098

CDRL MODIFICATION MATRIX.

This matrix identifies the CDRL changes as implemented by contract modification.

PROPOSAL NO.

CDRL REV

NO.

DATE CDRL/PAGES REVISED

Contract Award Basic 12-Jun-2023 All

TABLE OF CONTENTS

1.0 APPLICABLE DOCUMENTS

2.0 REFERENCE DOCUMENTS

3.0 DATA DELIVERIES

3.1 DELIVERY DATES

3.2 TAILORED DATA ITEMS

3.3 APPROVAL OF DATA

3.4 RE-SUBMITTAL OF DATA

3.5 FINAL SUBMITTAL OF DATA

3.6 DD FORM 250 REQUIREMENTS

3.7 CLASSIFIED DATA

4.0 ELECTRONIC DATA TRANSMISSION

4.1 SUBMISSION

4.2 DELIVERY NON-COMPLIANCE

4.3 FINANCIAL INFORMATION FORMAT

5.0 LETTERS OF TRANSMITTAL (LT)

6.0 MODIFICATION OF DATA REQUIREMENTS

7.0 COMMON ABBREVIATIONS

8.0 MARKING TECHNICAL DOCUMENTATION

8.1 DISTRIBUTION MARKING SYSTEM

8.2 MARKING TECHNICAL DATA

8.3 DISTRIBUTION STATEMENTS

8.4 CONTROLLING OFFICE

8.5 EXPORT-CONTROLLED WARNING STATEMENT

8.6 CONTROLLED UNCLASSIFIED INFORMATION (CUI)

8.7 MARKING NON-TECHNICAL DOCUMENTATION

8.8 MARKING EXAMPLES

8.9 INTELLECTUAL PROPERTY/MARKING

9.0 MAILING LISTS

10.0 CDRL TABLE OF CONTENTS

1.0 APPLICABLE DOCUMENTS

Data Item Descriptions (DIDs)/DD Form 1664s, are identified in Block 4 of the individual Contract Data Requirements List (CDRL)/DD Form 1423-1. All DIDs are available to the contractor at the following website: http://quicksearch.dla.mil/.

2.0 REFERENCE DOCUMENTS

DAFI 61-201 Management of Scientific and Technical Information (STINFO)

DFARS 227.71 Rights in Technical Data

DFARS 227.72 Rights in Computer Software & Computer Software Documentation

DoD 5010.12-M Procedures for the Acquisition and Management of Technical Data

DoDD 5230.09 Clearance of DoD Information for Public Release

DoDD 5230.25 Withholding of Unclassified Technical Data from Public Disclosure

DoDD 5400.07 DoD Freedom of Information Act (FOIA) Program

DoDI 2040.02 International Transfer of Technology, Articles, and Services

DoDI 5200.48 Controlled Unclassified Information (CUI)

DoDI 5230.24 Distribution Statements on DoD Technical Information

DoDM 5200.01v1 DoD Information Security Program: Overview, Classification, and Declassification

DoDM 5200.01v2 DoD Information Security Program: Marking of Information

DoDM 5200.01v3 DoD Information Security Program: Protection of Classified Information

EIA 649-1 Configuration Management Requirements for Defense Contracts

3.0 DATA DELIVERIES

The CDRL establishes the data to be delivered by the contractor. The CDRL also identifies the submittal, inspection, approval, acceptance, and distribution requirements of all the CDRL data items contained herein.

3.1 Delivery Dates

In the event a CDRL delivery date falls on a Saturday or Sunday, the delivery will be made by Friday to be counted as an on-time delivery. Unless otherwise specified in Block 16 of the CDRL, all references to “days” will refer to calendar days. If the CDRL delivery falls on a holiday, the submittal must be delivered on the day before the holiday.

Early CDRL delivery is permitted. The contractor must notify the Government of late CDRL deliveries.

http://quicksearch.dla.mil/

3.2 Tailored Data Items

Tailoring instructions are as described in Block 16 of each affected CDRL. If the data preparation instructions contained in Block 16 of the CDRL are different than the instructions contained in the DID, the CDRL shall govern.

3.3 Approval of Data

An "A" designator in Block 8 of the CDRL indicates the Government will formally reply to each data submittal with an approval, approval with comments, or disapproval. The Government will respond by issuing a Procuring Contracting Officer (PCO) letter or e-mail to the contractor within 45 calendar days, unless otherwise specified on the CDRL, Block 16. This does not apply to Engineering Change Proposals (ECPs) and Contract Change Proposals (CCPs).

For those CDRLs with an "N/A" in Block 8, Government approval of the content is not required; however, compliance with data item format and content requirements as specified in the DID, and as tailored in Block 16 of the CDRL, is mandatory. However, the Government may not provide a formal response back to the contractor. The Government has the right to reject/disapprove any data submittal(s) not in compliance with contract requirements.

3.4 Re-submittal of Data

If re-submittal of a CDRL is required, it shall be resubmitted within 30 calendar days after PCO notification, unless otherwise specified. Should the contractor disagree with the re-submittal requirements, they shall submit their comments to the PCO within 30 calendar days of notification. Each page of a re-submittal shall have changes indicated by a vertical line down the outer right margin designating those areas that have been revised.

The document revision shall be indicated on the title page of the data item, each page, and a summary of document changes section contained within the document.

3.5 Final Submittal of Data

For the final delivery of each data item in the contract/delivery order, the contractor shall clearly state in the Letter of Transmittal (LT), as defined in paragraph 5.0, when it is the last submittal being made, and that all contractual requirements concerning that data item have been fulfilled.

3.6 DD Form 250 Requirements

Block 7 of the CDRL directs the inspection and acceptance of the submittal. Individual DD Form 250s are required only if indicated in Block 7. All other submittals shall be accompanied by a Letter of Transmittal (LT).

3.7 Classified Data

Classified data shall be submitted in accordance with the requirements established by the DD Form 254, Contract Security Classification Specification. The contractor shall contact the PCO for the mailing address(es) if not specified in Block 14 or 16 of the DD Form 1423-1.

4.0 ELECTRONIC DATA TRANSMISSION

4.1 Submission

The contractor shall submit all data deliverables in accordance with the specific submittal instructions indicated in Block 16 of each CDRL. The versions of the software used shall remain compatible with current program office software. Any submittals by other means shall require program office approval prior to delivery of data. Data to be submitted by electronic data transmission (EDT) shall be identified in “Block 14.b Repro” of the CDRL.

The Contractor shall electronically deliver all contractual data using the Government-controlled method of delivery, Multi-user ECP Automated Review System (MEARS), https://mears1.redstone.army.mil/mears/Default.aspx. The Contractor shall work with the Government to ensure that an adequate number of Contractor personnel obtain and possess Public Key Infrastructure (PKI) certification from an accepted Government source. The Contractor shall be receptive to the training offered by the Government on the MEARS system.

Submissions of large data files may be made via a DoD approved site such as Secure Access File Exchange (SAFE) (https://safe.apps.mil/) or CD/DVD mailed to the Government Program Office.

An alternate method of delivery when MEARS is down for maintenance will be the DISA application, known as DOD SAFE, https://safe.apps.mil/. It will be available to all DOD Common Access Card (CAC) holders or Contractor personnel who possess Public Key Infrastructure (PKI) certification from an accepted Government source.

4.2 Delivery Non-Compliance

The contractor shall inform the program office if any of their data deliverables cannot comply with the required electronic formats. In such cases the contractor shall recommend, for program office approval, an alternative delivery format(s).

4.3 Financial Information Format

Financial information provided in excel spreadsheets should be able to be manipulated.

5.0 LETTERS OF TRANSMITTAL (LT)

All data deliveries shall include a LT. The LT may be in the form of a letter or e-mail from the designated contractor representative. As a minimum, the LT shall contain:

Contractor Point of Contact (POC) Contractor’s address Date Contract number and program name Letter control number Document control number Document revision level Document date CDRL sequence number DID Number https://mears1.redstone.army.mil/mears/Default.aspx https://safe.apps.mil/ https://safe.apps.mil/

Data Title/Subtitle Reason or frequency of submittal (monthly, draft, final, update, etc.)

List of distribution addressees as identified in Block 14 of the CDRL

If a paper copy of the LT is prepared, a complete list of addressees shall be placed at the end of the LT, annotating the recipients (as identified on the DD Form 1423-1, Block

14) including the transmittal-letter-only recipients.

If submittal is made via e-mail, the list of addressees in the “TO” line shall include the complete list of addressees and shall be considered sufficient.

6.0 MODIFICATION OF DATA REQUIREMENTS

During the performance of this contract, the PCO may unilaterally increase or decrease the number of addressees and/or number of copies the technical office requires; or may make other administrative or clarification changes to the CDRL.

The PCO may unilaterally make other administrative and/or clarification changes to the CDRLs. The contract price will constitute full satisfaction of any entitlement of equitable adjustment under the “Changes” clause provided the Contractor agrees to accept such change at no change in contract price. Unilateral action shall be by the issuance of a PCO's letter, which will reference this paragraph as its authority. The Contractor shall notify the PCO of the estimated cost if the changes impact the contract price.

7.0 COMMON ABBREVIATIONS

Block 7: SS Inspection at Source / Acceptance at Source

DD Inspection at Destination / Acceptance at Destination

SD Inspection at Source / Acceptance at Destination

LT Letter of Transmittal

Block 8: A Approval

N/A Approval Not Required

16 See Block 16 for further instructions

Blocks 10, 12 & 13: ANNLY Annually

ASGEN As Generated

ASREQ As Required

BI-MO Bi-Monthly

BI-WE Bi-Weekly

BLK 16 See Block 16

DAILY Daily

DFDEL Deferred Delivery

EOC End of Contract

EOM End of Month

EOQ End of Quarter

MTHLY Monthly

ONE/P One-time Preliminary draft

ONE/R One-time with Revisions

OTIME One Time

QRTLY Quarterly

R/ASR Revisions as Required

SEMIA Every 6 Months

WEKLY Weekly

XDACM X Days after Contract Modification

XDADO X Days after Delivery Order

XDARC X Days after Receipt of Comments

XDARP X Days after Reporting Period

XDATC X Days after Test Completion

XDPTT X Days prior to Test

XTIMES X Times

8.0 MARKING TECHNICAL DOCUMENTATION

8.1 Distribution Marking System

In accordance with Section 1.30 of Title 10, “United States Code” a DoD distribution marking system for technical data has been established by DoD Instruction 5230.24, “Distribution Statements on Technical Documents” and DAFI 61-201, Management of Scientific and Technical Information. The intent of the system is to stem the flow of military-related technical data to our adversaries, without inhibiting technological growth or blocking the exchange of technical data that is vital to progress and innovation. The contractor shall mark all distribution statements and export-control statements, supplemental to any security markings, on all technical data to denote the extent of its availability for secondary distribution, release, and disclosure without need for additional approvals and authorizations from the controlling DoD office.

Distribution statements are annotated in Block 9 of each CDRL and defined in paragraph

8.3. If the contractor feels that a different statement is required, they must notify the contracting officer with the recommended statement, prior to CDRL submittal. The Government will review the request and determine which statement is the most appropriate and provide the contractor with an acceptance of the change or reason for not accepting the contractor’s request for change.

8.2 Marking Technical Data

The contractor shall mark all requested technical information, regardless of its medium, with a distribution statement. This includes technical reports, blueprints, drawings, technical orders, technical manuals, plans, instructions, computer software, viewgraphs, film, technical papers, photographs, etc. If the document contains export-controlled technical data, it also must be marked with an export control warning statement.

Distribution statements can be applied to technical data that contain or reveal proprietary information used.

Technical data categorized as cryptographic/communications security, communications/electronic intelligence, and similar categories as may be designated by the Director, National Security Agency, whose distribution is limited through alternate methods, are exempt from these marking provisions.

Certain types of technical data preclude placing the entire notice on the document. To accommodate this problem, each distribution statement contains an authorized abbreviation form. Abbreviated distribution statements are to be used only when space precludes placing the entire notice on the document. The use and wording of these statements are described in the following paragraphs.

The contractor shall mark Controlled Unclassified Information (CUI) in accordance with DoDI 5200.48, paragraph 3.4.

8.3 Distribution Statements

A DoD distribution marking system for technical data is prescribed in DoD Instruction (DoDI) 5230.24, “Distribution Statements on DoD Technical Information.” The intent of the system is to identify the audience approved for secondary distribution of the data in order to stem the flow of military-related technical data to our adversaries, without inhibiting technological growth or appropriate exchange of technical data that is vital to progress and innovation. These markings are in addition to any security classification or other control markings.

The contractor shall mark all technical information, regardless of its medium, with the appropriate distribution statement as prescribed by the controlling DoD office.

Distribution statements are also applied to technical data that contain proprietary information. Per DAFI 61-201, paragraph 3.4.4.1, “Distribution statements are displayed conspicuously on all technical documents regardless of medium or format.

For standard written or printed material, the Distribution Statement is shown on all pages to the maximum extent practical and at a minimum on the front cover, title page, and SF 298, where applicable. If the technical information is digitally prepared or in any other medium that does not have a cover or title page, the applicable Distribution Statement is affixed to all physical and digital items by other means in a conspicuous position for ready recognition.” Drawings must display the distribution statement on the first sheet at a minimum.

Technical data categorized as cryptographic/communications security, communications/ electronic intelligence, and similar categories as may be designated by the Director, National Security Agency, whose distribution is limited through alternate methods, are exempt from these marking provisions.

Certain types of technical data preclude placing the entire notice on the document.

Abbreviated distribution statements must be approved by the program office and are to be used only when space precludes placing the entire statement on the document.

The distribution statement is identified in Block 9 of each CDRL. If the contractor feels that a different statement or defense category is required, the contractor must notify the PCO with the recommended statement. The Government will review the request, determine which statement is the most appropriate, and provide the contractor with either an acceptance or rejection of the requested change.

Wording for the distribution statements is shown below. The acceptable defense categories for the distribution statements must be chosen from those listed in DoDI

5230.24. The following address will be used on all documentation for the “controlling DoD office” for this program:

DISTRIBUTION STATEMENT B: Distribution authorized to U.S. Government agencies [category] [date of determination]. Other requests for this document must be referred to [controlling DoD office].

The abbreviated form is: “Statement B, US Government, (AFLCMC/WNU).”

DISTRIBUTION STATEMENT C: Distribution authorized to U.S. Government agencies and their contractors [category] [date of determination]. Other requests for this document must be referred to [controlling DoD office].

The abbreviated form is: “Statement C, Gov’t and contractors, (AFLCMC/WNU).”

DISTRIBUTION STATEMENT D: Distribution authorized to the Department of Defense and U.S. DoD contractors only [category] [date of determination]. Other requests for this document must be referred to [controlling DoD office].

The abbreviated form is: “Statement D, DoD & U.S. DoD Contractors, (AFLCMC/WNU).”

DISTRIBUTION STATEMENT E: Distribution authorized to DoD Components only [category] [date of determination]. Other requests for this document must be referred to [controlling DoD office].

The abbreviated form is: “Statement E, DoD Components, (AFLCMC/WNU).”

DISTRIBUTION STATEMENT F. Further distribution only as directed by [controlling DoD office] [date of determination] or higher DoD authority.

The abbreviated form is: “Statement F, (AFLCMC/WNU).”

8.4 Controlling Office

The following address will be used on all documentation for the “controlling office” for this program:

AFLCMC/WNU

Human Systems Division (Program Name) 1981 Monahan Way, Bldg 12 Wright Patterson AFB, OH 45433-7205

8.5 Export-Controlled Warning Statement

Authority to withhold and control the export of certain technical data with military or space application is determined in accordance with Title 10, United States Code section 130, “Authority to withhold from public disclosure certain technical data,” and implemented by DoDD 5230.25, if such data may not be exported lawfully outside the United States without an approval, authorization, or license under the Export Control Reform Act of 2018 or the Arms Export Control Act (AECA) (both cited in the Export Control Warning). Such withholding and export control applies to Defense items listed in the United States Munitions List (USML), which is part of the International Traffic in Arms Regulations (ITAR) (22 CFR 120-130); and Export Administration Regulations (EAR) (15

CFR 730-774).

If a technical document, whether printed or electronic/digital, contains export-controlled technical data, it shall be marked with the export control warning statement prescribed in DoDI 5230.24 and shown below. When it is not feasible to use the entire statement, the abbreviated warning may be used, and a copy of the full warning added to the “Notice to Accompany the Dissemination of Export-Controlled Technical Data,” which is Enclosure 5 of DoDD 5230.25. For assistance in determining what is export controlled, consult the controlling DoD office. The Export Control Warning may be used in conjunction with distribution statements B, C, D, E, and F. Distribution statement A, which denotes public release, cannot be used in conjunction with the export-control warning notice.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties.

Disseminate in accordance with provisions of DoD Directive 5230.25 and DoD Instruction 2040.02.

8.6 Controlled Unclassified Information (CUI)

Unclassified documentation that is associated with a law, regulation, or government-wide policy, and identified as needing safeguarding, is considered CUI and must be marked according to DoDI 5200.48, Controlled Unclassified Information (CUI).

8.7 Marking Non-Technical Documentation

Non-technical documentation that is associated with a law, regulation, or government-wide policy, and identified as needing safeguarding, is considered CUI and must be marked according to DoDI 5200.48, Controlled Unclassified Information (CUI).

8.8 Marking Examples

The marking examples below are for reference. Specific information within the distribution statements and the CUI Designation Indicator will depend upon each individual case.

Marking example for non-technical CUI:

Marking example for technical CUI:

Controlled by: USAF/AFMC Controlled by: AFLCMC/XXXX CUI Category: General Proprietary Business Information Distribution/Dissemination Control: IAW DoDI 5200.48 Limited Dissemination Controls are mandatory for non-technical CUI POC: Gov POC name and email

CUI Designation Indicator IAW DoDI 5200.48

CUI

CUI Mark Top of Page

Mark Bottom of Page

Complete DoDI 5230.24 Distribution Statement

DISTRIBUTION STATEMENT E. Secondary Distribution authorized to DoD components only; Controlled Technical Information; 27 August 2021. Other requests for this document must be referred to AFLCMC/XXXX, Gov address.

Controlled by AFLCMC/XXXX CUI Category: Controlled Technical Information Distribution/Dissemination Control: E POC: Gov POC name and email

CUI Designation Indicator IAW DoDI 5200.48

Marking example for export-controlled technical CUI:

8.9 Intellectual Property/Marking

Any markings that are added to documents for review purposes must be removed prior to formal submittal. If a document still requires a marking not addressed in the contract, the contractor must provide a justification for the marking.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code).

Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive

5230.25 and DoD Instruction 2040.02.

Complete DoDI 5230.24 Distribution Statement

DISTRIBUTION STATEMENT E. Secondary Distribution authorized to DoD components only; Critical Technology, Export Controlled; 27 August 2021.

Other requests for this document must be referred to AFLCMC/XXXX, Gov address.

Controlled by AFLCMC/XXXX CUI Category: Controlled Technical Information Distribution/Dissemination Control: E POC: Gov POC name and email

CUI Designation Indicator IAW DoDI 5200.48

DoDI 5230.24 Export Control Warning

9.0 MAILING LISTS

The Government will provide the following information for each recipient identified in Block 14: office symbol, mailing address, point of contact e-mail and phone number.

Office/Symbol Addresses Email/Phone

AFLCMC/WNU

For data deliveries

MEARS https://mears1.redstone.army.mil/

(C/DM)

For LOT deliveries

Ms. Clarissa Copta-Soter

Human Systems Division

AFLCMC/WNU

1981 Monahan Way, Bldg 12

WPAFB OH 45433-7205

clarissa.copta-soter.1@us.af.mil

937-656-8989

(PM/LM)

AFLCMC/WNUS

Ms. Caitlen Christensen Warner Robins Air Logistics Complex caitlen.christensen@us.af.mil

478-472-7400

(PCO)

AFLCMC/WNKAC

Mr. John Middlebrooks Warner Robins Air Logistics Complex john.middlebrooks@us.af.mil

478-468-3230

(EN)

AFLCMC/WNUS

Mr. Varrick Horton Warner Robins Air Logistics Complex varrick.horton@us.af.mil

478-472-7447

(PMS)

404 SCMS/

GUMAAC

Mr. Matthew Hawkins Warner Robins Air Logistics Complex matthew.hawkins.8@us.af.mil

478-468-0865

10.0 CDRL TABLE OF CONTENTS

https://mears1.redstone.army.mil/ mailto:clarissa.copta-soter.1@us.af.mil mailto:caitlen.christensen@us.af.mil mailto:matthew.hawkins.8@us.af.mil

6/12/2023 12:44:56 PM CDT CDRL Table of Contents

CONTRACT #: TBD

CONTRACTOR: CHEMRING ENERGETIC DEVICES

SET NAME: AFETE SYSTEM ITEM: AFETE Equipment

PROGRAM: Human Systems

DATA ITEM REQUIRING OFFICE AUTHORITY/TITLE/SUBTITLE SOW PARAGRAPH

A001 AFLCMC/WNUS DI-MGMT-81803A PWS para 4.7.11

Item Unique Identification (IUID) Marking Plan

A002 AFLCMC/WNUS DI-MGMT-81804A PWS para 4.7.1.1

Item Unique Identification (IUID) Marking Activity and Verification Report

A003 AFLCMC/WNUS DI-MGMT-81634C PWS para 4.7.4.2, 4.7.4.3

Commercial Asset Visibility Air Force (CAV AF)/Government Furnished Material Report

A004 AFLCMC/WNUS DI-MGMT-81838 PWS para 4.7.4.2

Commercial Asset Visibility (CAV) Reporting

A005 AFLCMC/WNUS DI-MISC-81832 PWS para 4.7.5.1

Counterfeit Prevention Plan

A006 AFLCMC/WNUS DI-NDTI-80809B PWS para 4.7.2.2 / 4.7.2.3

Test/Inspection Report

A007 AFLCMC/WNUS DI-QCIC-80553A PWS para 4.7.2.2

Acceptance Test Plan

A008 AFLCMC/WNUS DI-NDTI-80603A PWS para 4.7.2.3

Test Procedure

A009 AFLCMC/WNUS DI-SDMP-81748 PWS para 4.7.2.5

Parts Management Plan

A010 AFLCMC/WNUS DI-MISC-80711A PWS para 4.12

Scientific and Technical Reports

A011 AFLCMC/WNUS DI-SESS-80639E PWS para 4.13.1.2, 4.13.1.2.1, 4.13.1.2.2

Engineering Change Proposal (ECP)

A012 AFLCMC/WNUS DI-SESS-80642E PWS para 4.13.1.2

Notice of Revision (NOR)

A013 AFLCMC/WNUS DI-PSSS-81656B PWS para 4.13.2, 7.0

Bill of Materials (BOM) for Logistics and Supply Chain Risk Management

A014 AFLCMC/WNUS DI-IPSC-81442A PWS para 4.8.2

Software Version Description (SVD)

A015 AFLCMC/WNUS DI-MISC-81454D PWS para 4.8.2

6/12/2023 12:44:56 PM CDT CDRL Table of Contents

Computer Program Identification Number (CPIN) Catalog Information

A016 AFLCMC/WNUS DI-IPSC-80590B PWS para 4.8.2

Computer Program End Item Documentation

A017 AFLCMC/WNUS DI-MISC-81618 PWS para 4.13.1.3.2

Service Bulletins

A018 AFLCMC/WNUS DI-MGMT-80441D PWS para 3.1

Government Property (GP) Inventory Report

A019 AFLCMC/WNUS DI-PSSS-81995A PWS para 4.7.4.2

Contract Depot Maintenance (CDM) Monthly Production Report

A020 AFLCMC/WNUS DI-MGMT-82128A PWS para 4.7.4.2

Contract Government Furnished Material (GFM) Monthly Requisition and Inventory Report

A021 AFLCMC/WNUS DI-MGMT-81948 PWS para 7.0

Diminishing Manufacturing Sources and Material Shortages (DMSMS) Management Plan

A022 406 SCMS/GUEE TM-86-01R/T PWS para 4.4.1, 8.0

Technical Manual Contract Requirement (TMCR)

Technical Manuals

B001 AFLCMC/WNUS DI-QCIC-80278C PWS para 4.4.1

CALIBRATION AND MEASUREMENTS REQUIREMENTS

SUMMARY (CMRS)

(1 Data Item)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY:

TDP TM OTHER MGMT

D. SYSTEM/ITEM

AFETE Equipment

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

CHEMRING ENERGETIC DEVICES

1. DATA ITEM NO.

A001

2. TITLE OF DATA ITEM

Item Unique Identification (IUID) Marking Plan

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-MGMT-81803A

5. CONTRACT REFERENCE

PWS para 4.7.11

6. REQUIRING OFFICE

AFLCMC/WNUS

7. DD 250 REQ

LT

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

ONE/R

12. DATE OF FIRST SUBMISSION

30DAC

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

NA

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 1:

a. Applicable to the following AFET equipment; P/Ns 6177100-20, 6213100, and 6112300-1.

b. Changes to office symbols and/or e-mail addresses, when necessary, shall be made by letter through the Government CO/ACO without further revision to this CDRL.

Block 4:

a. Submission shall be made electronically to the Program Manager and Program Engineer. The contractor shall request current submission contact names and email addresses at least 5 working days prior to submission.

Block 8,10,13:

a. Government will provide comments/corrections within 30 days of contractor submittal.

b. Contractor shall provide updated/corrected IUID Marking Plan within 15 days of receipt of government comments.

MEARS 1

15. TOTAL 0 0 1

G. PREPARED BY

copta-soter.clarissa.l.1179994425 Configuration and Data Management Specialist

H. DATE

2023/06/12

I. APPROVED BY

Caitlen S. Christensen Head Gear Logistics Management Specialist

J. DATE

2023/06/12

18. ESTIMATED

TOTAL PRICE

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 1 of 1 Pages

17. PRICE GROUP

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER MGMT

D. SYSTEM/ITEM

AFETE Equipment

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

CHEMRING ENERGETIC DEVICES

1. DATA ITEM NO.

A002

2. TITLE OF DATA ITEM

Item Unique Identification (IUID) Marking Activity and Verification Report

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-MGMT-81804A

5. CONTRACT REFERENCE

PWS para 4.7.1.1

6. REQUIRING OFFICE

AFLCMC/WNUS

7. DD 250 REQ

LT

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

ONE/R

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

N/A

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 1:

a. Applicable to the following AFET equipment; P/Ns 6177100-20, 6213100, and 6112300-1.

b. Changes to office symbols and/or e-mail addresses, when necessary, shall be made by letter through the Government CO/ACO without further revision to this CDRL.

Block 10,12,13:

a. Contractor shall submit an IUID Marking Activity and Verification Report with each delivery lot or repair unit.

b. Submission shall be made electronically to the Program Manager and Program Engineer. The contractor shall request current submission contact names and email addresses at least 5 working days prior to submission.

c. All reports shall be stored for a minimum of 3 years at the contractor's facility or until deemed no longer required by

AFLCMC/WNUS.

MEARS 1

15. TOTAL 0 0 1

G. PREPARED BY

copta-soter.clarissa.l.1179994425 Configuration and Data Management Specialist

H. DATE

2023/06/12

I. APPROVED BY

Caitlen S. Christensen Head Gear Logistics Management Specialist

J. DATE

2023/06/12

18. ESTIMATED

TOTAL PRICE

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER MGMT

D. SYSTEM/ITEM

AFETE Equipment

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

CHEMRING ENERGETIC DEVICES

1. DATA ITEM NO.

A003

2. TITLE OF DATA ITEM

Commercial Asset Visibility Air Force (CAV AF)/Government Furnished Material Report

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-MGMT-81634C

5. CONTRACT REFERENCE

PWS para 4.7.4.2, 4.7.4.3

6. REQUIRING OFFICE

AFLCMC/WNUS

7. DD 250 REQ

DD

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

BLK16

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

N/A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 1:

a. Applicable to the following AFET equipment; P/Ns 6177100-20, 6213100, and 6112300-1.

b. Changes to office symbols and/or e-mail addresses, when necessary, shall be made by letter through the Government CO/ACO without further revision to this CDRL.

c. The contractor shall report End Item transactional data through electronic submission in CAV AF using CAV AF web site (https://www.cavaf.com) or CICA XML IAW the referenced DID IAW and/or CAV AF CFM PWS. This information will be accessed by the program office and by 406 SCMS/GUMA in order to ascertain production status.

d. Transactions and data will be submitted by the contractor daily IAW CAV AF User Guide, Version 8.0 or higher. The Contractor shall obtain a valid DoD PKI certificate to log into CAV AF. Each user shall be required to have an Identity Certificate only; an encryption certificate is not required.

e. Training will be provided by 406 SCMS/GUMA, (478)327-6602 or 327- 6603.

f. This DD Form 1423-1 applies to Contractor Furnished Material (CFM) type contracts.

Block 10, 13:

a. Contractor reporting requirements to CAV AF shall be accomplished daily and/or within 24 hours of a supply or maintenance action occurrence IAW Contractors Users Guide.

b. The method of communication from the contractor to the Air Logistics Center (ALC) will be mechanized using the CAV AF Online web site IAW CAV AF Contractor Users Guide.

Block 11:

a. Data shall be current within 24 hours of last End Item maintenance occurrence.

Block 12:

a. Date of first submission shall be within 24 hours following a supply or maintenance transaction after the contractor award date and government training as specified in IAW CAV AF Users Guide.

Block 14:

a. Submit electronic copies via email (preferred) or on any PC based formatted media such as CDROM. Submissions will be addressed to the designated and alternate points of contact as identified by the POC.

MEARS 1

15. TOTAL 0 0 1

G. PREPARED BY

copta-soter.clarissa.l.1179994425 Configuration and Data Management Specialist

H. DATE

2023/06/12

I. APPROVED BY

Caitlen S. Christensen Head Gear Logistics Management Specialist

J. DATE

2023/06/12

18. ESTIMATED

TOTAL PRICE

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER MGMT

D. SYSTEM/ITEM

AFETE Equipment

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

CHEMRING ENERGETIC DEVICES

1. DATA ITEM NO.

A004

2. TITLE OF DATA ITEM

Commercial Asset Visibility (CAV) Reporting

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-MGMT-81838

5. CONTRACT REFERENCE

PWS para 4.7.4.2

6. REQUIRING OFFICE

AFLCMC/WNUS

7. DD 250 REQ

DD

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

BLK16

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block: 1

a. Applicable to the following AFET equipment; P/Ns 6177100-20, 6213100, and 6112300-1.

a. Changes to office symbols and/or e-mail addresses, when necessary, shall be made by letter through the Government CO/ACO without further revision to this CDRL.

Block 5:

a. Contract Reference: PWS and CAV AF Reporting Requirements Document.

Block 10, 11, 12, 13:

a. Date of first submission shall be within 24 hours following a supply or maintenance transaction, after the contract award date.

b. Contractor reporting requirements to CAV AF shall be submitted daily and/or within 24 hours of a supply or maintenance action occurrence IAW the CAV AF Reporting Requirements Document.

c. Data shall be current within 24 hours of the last End Item maintenance occurrence.

MEARS 1

15. TOTAL 0 0 1

G. PREPARED BY

copta-soter.clarissa.l.1179994425 Configuration and Data Management Specialist

H. DATE

2023/06/12

I. APPROVED BY

Caitlen S. Christensen Head Gear Logistics Management Specialist

J. DATE

2023/06/12

18. ESTIMATED

TOTAL PRICE

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER MISC

D. SYSTEM/ITEM

AFETE Equipment

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

CHEMRING ENERGETIC DEVICES

1. DATA ITEM NO.

A005

2. TITLE OF DATA ITEM

Counterfeit Prevention Plan

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-MISC-81832

5. CONTRACT REFERENCE

PWS para 4.7.5.1

6. REQUIRING OFFICE

AFLCMC/WNUS

7. DD 250 REQ

LT

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

R/ASR

12. DATE OF FIRST SUBMISSION

30DAC

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

N/A

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 1:

a. Applicable to the following AFET equipment; P/Ns 6177100-20, 6213100, and 6112300-1.

b. Changes to office symbols and/or e-mail addresses, when necessary, shall be made by letter through the Government CO/ACO without further revision to this CDRL.

Blocks 8,10,12,13:

a. Submission shall be made electronically to the Program Manager and Program Engineer. The contractor shall request current submission contact names and email addresses at least 5 working days prior to submission.

b.. Government will provide comments/corrections within 45 days of contractor submittal.

c. Contractor shall provide updated/corrected CPP within 15 days of receipt of government comments.

d. Contractor shall provide an updated CPP within 30 days of any change to documented counterfeit prevention or detection processes.

MEARS 1

15. TOTAL 0 0 1

G. PREPARED BY

copta-soter.clarissa.l.1179994425 Configuration and Data Management Specialist

H. DATE

2023/06/12

I. APPROVED BY

Caitlen S. Christensen Head Gear Logistics Management Specialist

J. DATE

2023/06/12

18. ESTIMATED

TOTAL PRICE

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER NDTI

D. SYSTEM/ITEM

AFETE Equipment

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

CHEMRING ENERGETIC DEVICES

1. DATA ITEM NO.

A006

2. TITLE OF DATA ITEM

Test/Inspection Report

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-NDTI-80809B

5. CONTRACT REFERENCE

PWS para 4.7.2.2 / 4.7.2.3

6. REQUIRING OFFICE

AFLCMC/WNUS

7. DD 250 REQ

LT

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

ASREQ

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 1:

a. Applicable to the following AFET equipment; P/Ns 6177100-20, 6213100, and 6112300-1.

b. Changes to office symbols and/or e-mail addresses, when necessary, shall be made by letter through the Government CO/ACO without further revision to this CDRL.

Block 10, 11, 12, 13, 14:

a. Contractor shall submit Test/Inspection Report, in editable WORD format, NLT 30 calendar days after final test/repair event.

Government will be allowed up to 30 days, after receipt from contractor, to provide Comment Resolution Matrix (CRM), which allows up to 21 days for formal review, and 9 days for consolidation.

b. The contractor has up to 4 days after CRM receipt from government to provide government with CRM decision (i.e. provide accept/modify/reject response) and updated Test/Inspection Report with accepted CRM comments implemented.

c. The contractor has up to 4 days to conduct a meeting with the government for CRM modify/reject resolution. The contractor has up to 4 days to submit adjudicated Test/Inspection Report (i.e.

Test/Inspection Report modified to include CRM accepted comments and adjudicated modify/reject decision comments) to government for signature/approval. The government has up to 15 days, after receipt from contractor, to approve Test/Inspection Report.

d. Submission shall be made by email to Program Manager and Engineer.

MEARS 1

15. TOTAL 0 0 1

G. PREPARED BY

copta-soter.clarissa.l.1179994425 Configuration and Data Management Specialist

H. DATE

2023/06/12

I. APPROVED BY

Caitlen S. Christensen Head Gear Logistics Management Specialist

J. DATE

2023/06/12

18. ESTIMATED

TOTAL PRICE

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER QCIC

D. SYSTEM/ITEM

AFETE Equipment

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

CHEMRING ENERGETIC DEVICES

1. DATA ITEM NO.

A007

2. TITLE OF DATA ITEM

Acceptance Test Plan

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-QCIC-80553A

5. CONTRACT REFERENCE

PWS para 4.7.2.2

6. REQUIRING OFFICE

AFLCMC/WNUS

7. DD 250 REQ

LT

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

BLK16

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 1:

a. Applicable to the following AFET equipment; P/Ns 6177100-20, 6213100, and 6112300-1.

b. Changes to office symbols and/or e-mail addresses, when necessary, shall be made by letter through the Government CO/ACO without further revision to this CDRL.

Block 8, 10, 11, 12, 13:

a. Submittal shall be delivered 60 days prior to test.

b. Contractor shall request current submission contact names and email addresses at least 5 working days prior to submission.

b. The Air Force will provide a disposition NLT 30 calendar days after receipt.

c. In instances where comments are provided, the contractor shall provide an updated submittal NLT 10 calendar days after receipt. In the event of no Air Force response, the contractor shall notify the Government PM for approval.

MEARS 1

15. TOTAL 0 0 1

G. PREPARED BY

copta-soter.clarissa.l.1179994425 Configuration and Data Management Specialist

H. DATE

2023/06/12

I. APPROVED BY

Caitlen S. Christensen Head Gear Logistics Management Specialist

J. DATE

2023/06/12

18. ESTIMATED

TOTAL PRICE

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER QCIC

D. SYSTEM/ITEM

AFETE Equipment

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

CHEMRING ENERGETIC DEVICES

1. DATA ITEM NO.

A008

2. TITLE OF DATA ITEM

Test Procedure

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-NDTI-80603A

5. CONTRACT REFERENCE

PWS para 4.7.2.3

6. REQUIRING OFFICE

AFLCMC/WNUS

7. DD 250 REQ

LT

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

BLK16

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 1:

a. Applicable to the following AFET equipment; P/Ns 6177100-20, 6213100, and 6112300-1.

b. Changes to office symbols and/or e-mail addresses, when necessary, shall be made by letter through the Government CO/ACO without further revision to this CDRL.

Block 8, 10, 11, 12, 13:

a. The first submittal shall be delivered NLT 30 calendar days after test or IAW a Air Force approved schedule.

b. Contractor shall request current submission contact names and email addresses at least 5 working days prior to submission.

c. The Air Force will provide a disposition NLT 45 calendar days after receipt.

d. In instances where comments are provided, the contractor shall provide an updated submittal NLT 15 calendar days after receipt.

e. In the event of no Air Force response, the contractor shall notify the Headgear PM for approval.

f. Final Air Force approval will not occur until preproduction test sample have been successfully tested.

MEARS 1

15. TOTAL 0 0 1

G. PREPARED BY

copta-soter.clarissa.l.1179994425 Configuration and Data Management Specialist

H. DATE

2023/06/12

I. APPROVED BY

Caitlen S. Christensen Head Gear Logistics Management Specialist

J. DATE

2023/06/12

18. ESTIMATED

TOTAL PRICE

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER SDMP

D. SYSTEM/ITEM

AFETE Equipment

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

CHEMRING ENERGETIC DEVICES

1. DATA ITEM NO.

A009

2. TITLE OF DATA ITEM

Parts Management Plan

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-SDMP-81748

5. CONTRACT REFERENCE

PWS para 4.7.2.5

6. REQUIRING OFFICE

AFLCMC/WNUS

7. DD 250 REQ

LT

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

ASREQ

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 1:

a. Applicable to the following AFET…