Attachment 3 CNC Knee Mill Salient Characteristics.docx

DOCX document 23 KB Posted

Attached to
CNC Knee Mill
Solicitation number
FA3099-24-Q-1032
Issued by

About this file

Written by GovTribe AI ·

This document appears to be Attachment 3, titled "CNC Knee Mill Salient Characteristics," which outlines the technical requirements for a CNC Knee Mill being procured under Solicitation FA3099-24-Q-1032.

The key details are:

  • The solicitation is for a Firm-Fixed Price (FFP) Purchase Order (PO) for a CNC Knee Mill, issued by the 47th Contracting Squadron at Laughlin Air Force Base, TX.
  • The required specifications include: 208/230v 3 Phase AC 60 Hertz or 460v 3 Phase AC 60 Hertz power, 5HP motor, 40 Taper Spindle with variable speed up to 4200 RPM, 5" minimum quill travel with tilt capability, 14" x 34" minimum travels on the power knee and Z-axis, 12" x 50" table with T-slots, Acu-Rite G2 MillPWR CNC Control System, 3-axis DRO, and various other features.
  • Offers on other brands must include these salient characteristics to be considered "equal" to the specified Well-Index Model 847 brand.

View the file

Other files

File Type Posted
Attachment 1 Combined Synopsis Solicitation.docx DOCX document
Attachment 2 Provisions and Clauses.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Mill, Computer Numerical Control (CNC). Brand: Well-Index, Model: 847. Brand name or equal. Offers on other brands must include the following characteristics to be considered “equal”:

· Power: 208/230v 3 Phase AC 60 Hertz or 460v 3 Phase AC 60 Hertz;

· 5HP Motor;

· 40 Taper Spindle, variable speed up to 4200 RPM;

· Quill 5” Min. travel head with the ability to tilt RT to LT and Front to back;

· “14 x 34” min. travels Power Knee, Z Axis, 16” min. travel;

· 12” x 50” Table or comparable with "T" Slots,

· Acu-Rite G2 MillPWR CNC Control System;

· 3 Axis DRO, Z Axis Knee or Quill configurations will both be considered;

· Minimum CNC control for the X and Y Axis;

· Table X and Y Axis must be capable of operating with either CNC or Manual Controls;

· Knee must be Powered and have Manual Controls; it may have CNC Controls if it is the designated Z Axis;

· Quill must have Manual Control, can have a Powered CNC Control option if it is the designated Z Axis, but must have the option of Manual Control;

· One Shot/Auto Lubrication System,

· Work Light Mist/Micro Drop Coolant,

· Power Drawbar Chip Pan,

· With or Without Flood Coolant System,

File details come from the government source that posted it. Updated .