Attachment 2 - Washer Dryer - Statement of Work - 22 Aug 2025.pdf
PDF 302 KB Posted
- Attached to
- Commercial Washers and Dryers - Travis AFB, CA Federal contract opportunity
- Solicitation number
- FA442725Q1140
About this file
These Technical Specifications outline a solicitation by the U.S. Air Force 60th Force Support Squadron (60 FSS/FSVS) at Travis Air Force Base to purchase and install two new commercial washers and two commercial dryers for their fitness center. The specific equipment requirements are for UniMac or equivalent 30 lb softmount washer-extractors (model UYT030VN0HXUB0C0BA), an elevated base for the washers, and UniMac 30 lb single tumble dryers (model UTS30EFN0RGG6W0000) with electric heating and 230-240V power specifications.
The project includes removing and disposing of existing washer/dryer units and installing the new replacements. Work is to be performed Monday through Friday from 07:30 to 18:30 hours, with potential weekend or holiday work subject to Contracting Officer approval. The contractor must comply with base regulations, obtain necessary permits, properly dispose of construction debris, ensure site cleanliness, and provide documentation such as warranty information and operation manuals upon project completion. The period of performance is 30 calendar days to allow for material procurement, installation, and cleanup.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 6 - FA442725Q1140 Commercial Washers and Dryers - Questions and Answers.pdf | ||
| Attachment 4 - Dryer Specifications (UTS30).pdf | ||
| Combined Synopsis Solicitation - Commercial Washer and Dryer.pdf | ||
| Attachment 1 - Contractor Responsibility Verification.pdf | ||
| Attachment 5 - TAFB Security Requirements September 2024.pdf | ||
| Attachment 3 - Washer Specifications (UY30).pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Technical Specifications
DATE: August 2025
60 FSS/FSVS
Tanya McCormick
DATE: 22 August 2025
U.S. AIR FORCE
60 AMW
TRAVIS AFB, CA 94535
TECHNICAL SPECIFICATIONS FOR
PURCHASE NEW COMMERCIAL
WASHER & DRYER FOR FITNESS CENTER
TRAVIS AFB, CALIFORNIA
1. SCOPE OF WORK:
PURCHASE AND INSTALL PROJECT: The Contractor shall provide all management, tools, supplies, equipment, transportation and qualified personnel necessary to install two new 30 lb commercial washers and two new 30 lbs commercial dryers. The work will include removal and disposal of existing washer/dryer units and installation of new replacement units.
Contractor shall comply with regulations and laws in force. Contractor shall store their materials in designated areas as specified by Project Inspector or Representative. Period of performance shall be 30 calendar to allow material procurement, work completion and clean
up. This is a Brand name or equal requirement.
Replace two existing washer units:
Replace two existing dryer units:
Request to purchase UniMac or equivalent 30lb softmount washer units:
Item 1: Specifications for the UniMac UYT030VN0HXUB0C0BA 30lb
SOFTBAMOUNT washer-extractor:
• Capacity: 30 lbs (14 kg).
• Controls: UniLinc Touch
• Dimensions:
• Width: 31 5/16 (795)
• Depth: 36 4/5 (935)
▪ Height: 49 (1245)
• Cylinder:
• Diameter: 24 3/8 (620)
• Depth: 17 3/4 (450)
• Volume: 4.8 (135)
• Motor Size: 2.01 (1.50)
• Speeds: Wash speed rpm; Extract speed 1075; Extract G force 400
• Water Inlet Connection: 2 x 3/4 (19)
• Drain: 3 (76)
• Electrical: Voltage/Hz/Phase Circuit options available. Chosen option shall be
200-240V/50-60Hz/1ph
• Features:
• 3 water level settings.
• Up to 5 supply signals for automatic laundry chemical dispensing.
• Self-diagnostic and cycle counter tools.
• Computer-optimized frame designed to handle unbalanced loads efficiently.
• Automatic door unlock module, ozone resistant seals.
Item 2: Specifications for AYBF030X8X110001 Elevated Base for 30 lb washer-Extract UYT30: 7 7/8 Base for 30 lbs washer. Cabinet Softmount
ITEM 3: Unimac 30 lb single tumble dryer model number UTS30EFN0RGG6W0000, here are the specifications for the Unimac dryer or equivalent:
UniMac Industrial Single Tumble Dryer. Dual Digital controls. 30 lbs. capacity. Revering, galvanized cylinder. White front & side panels. Stainless steel door.
(E) Heating: Electric
(G) Voltage: 230-240V/50-60Hz/3Ph
W x D x H: 31.5" x 39.6" x 63.4"
Control Options UniLinc Touch, M Series, Dual Digital
Capacity - lb (kg) 30 (14) Overall Width - in (mm) 31.5 (800)
Overall Height - in (mm) 63.4 (1610)
Cylinder Diameter - in (mm) 30.0 (762)
Cylinder Depth - in (mm) 26.0 (660)
Cylinder Volume - cu. ft (liters) 10.6 (301)
Door Opening Size 22.7 (577)
Heat Input Power Electric 21 kW
Electrical Specs X** 200-240V/50-60/3
ITEM 4: MISC 2020
44391002 Electric Heat Conversion Kit for UTS30 - Change from 240V/3Ph to 208V/3Ph
2. WORK SITE CONDITIONS
The Contractor is permitted to use reasonable quantities of available electricity and water at the work site. The Contractor shall alter characteristics and shall observe conservation practices at all times. All connections shall be the responsibility of the Contractor including restorations to initial conditions.
Interruption of utilities. Utilities shall not be interrupted until approval is received from the Contracting Officer. Any such need shall be requested in writing by the Contractor at least 10 days in advance of the needed interruption. Requests for utility interruption shall indicate the type of utility to be interrupted, the type of operation requiring the interruption, the date and duration. To the maximum extent possible interruption shall be scheduled on weekends or U.S.
holidays in order to minimize impact to base activities.
Authorized work hours and days. Performance of work here under shall be from Monday through Friday excluding holidays from 07.30 to 18.30 hours. Work during weekends or holidays may be requested by the Contractor with a minimum of 10 days advance notice, however the Contracting Officer has the right to deny such request if the reasons requiring weekend and holiday work are not valid or for security or other necessities. A proposal work schedule will be submitted by the Contractor for C.O. approval.
Toilet facilities in the vicinity of the work site shall be available for Contractor use. The Contractor shall use facilities in a manner to maintain their state of cleanliness and hygiene.
If welding is to be performed the Contractor shall ensure a welding permit is obtained from the Travis AFB Base Fire Department prior to performing welding operations.
The Contractor shall not use base refuse containers to discard debris. All construction debris shall be discarded by the Contractor off base at authorized sites according to category of debris/refuse in strict observance of all host country laws, decrees and local regulations in force.
The Contractor shall be responsible for ensuring all personnel engaged in the performance of this contract observe all host country laws concerning safety.
At least 5 days prior to the pre-final inspection, the Contractor shall furnish to the Contracting Officer all installed equipment operation and maintenance documentation, certificates concerning installed systems as required by host country laws, test reports and results and as built drawings where required by host nation laws.
3. GENERAL NOTES
At the end of the work, the Contractor shall provide the Government with three copies of the following documents: for warranty call purpose, 3 copies of letter identifying project number, item, company address, phone number, point of contact, item warranty expiration date, etc.
The Contractor shall return all areas disturbed during construction to their original condition before final acceptance by the Government.
Housekeeping and Site Clean-up: At the end of each working day, the Contractor shall be responsible for cleaning of the area. Such functions include disposal of accumulated waste materials and rubbish and other operations necessary to present a neat appearance at all times.
Contractors shall ensure all light weight debris at the construction site is properly secured in waste receptacles so that it does not blow away to another area.
File details come from the government source that posted it. Updated .