Attachment_2-_Supply_Requirement.pdf

Supply Requirement Amphibious Track Vehicle with Trailer and Cutter Accessory

BODY:

• 15' 10" Long x 8’ 6” Wide x 8’ 4” High

• All Welded 1/8” Aluminum Body with 3/16” High

Strength Pontoon Bottoms

• 6960 LB (approx.)

• 1600 lb. Floating Load Capacity

• Overhead Rack/Brush guard

• Fold out windshield

• Walking deck full width of the tracks with slip resistant coating on decks (Line X or comparable)

• 38.5” Ground Clearance

• All Stainless-Steel Fasteners throughout machine

• Easily accessible and serviceable 29 Gallon Secured

Aluminum Fuel Tank mounted in rear bed area

• Rear mounted hydraulic three-point hitch with quick tach system that allows for implement installation/ removal in 1 minute or less

• Overhead cargo rack capable of supporting 100 lbs.

• Catwalk over winch

• (2) plugs installed in the floorboard of the driver and passenger floorboard for drain purpose

• Rearview camera with cab display

• Removable deck inserts to convert bed area to flat deck

• Removable Doors w/ aluminum Screen & vinyl insert windows

• Cab blowers

DRIVE SYSTEM:

• 74 HP 4-cylinder water Cooled Turbo diesel, comparable to Kohler 2504 TCR

• TIER 4 FINAL CERTIFIED MEETING ALL

REQUIREMENTS SET FORTH BY THE EPA FOR

2019 OFF ROAD DIESEL ENGINES

• Twin Hydrostatic Transmission

• Oil bath lubricated low speed/high torque final drives that requires no external greasing of bearings

• Thermostatic controlled hydraulic driven cooling fan with reversing feature for radiator/oil cooler cleanout

• Side by side radiator/hydraulic oil cooler

SPEED:

• 8 mph on land, 1 mph in water

TRACK SYSTEM:

• 28” Wide Aluminum Cleats on 4" centers (4" pitch)

• Two 10” Wide Low Stretch Rubber Belts per Track

• Four Rows of Urethane Drive Lugs/Track Guides per

Track

• Four UHMW Drive Sprockets per Track (4" pitch)

• Eighteen 10” urethane Bogie Wheels per Track

• Nine oil bath lubricated bogey axle assemblies per pontoon. Must be internally oil bath lubricated and sealed requiring no external greasing. Serviceable at 500 hour interval without removal of bogey wheel or axle. Bolt on design for easy replacement.

• All corrosion-proof stainless-steel track bolts and hardware for saltwater usage

• Front idler shafts and rear drive shafts to be stainless steel. Bearing housings anodized aluminum.

ELECTRICAL SYSTEM:

• 12 Volt Battery Secured in Enclosed Compartment

• Multifunction engine display

• 2 LED Front Lights/2 LED Rear Lights

• 12 Volt Auxiliary Receptacle in cab and rear bed area

• Battery cut-off switch

• 2 additional 10A ignition switched electrical connections.

2 SPST switches with LED indicator for emergency lighting and electric valve located on dashboard.

WINCH-JACK:

• Front Mounted 10,000lb Hydraulic Winch with 135’ of

3/8" cable

• front porthole window allowing operator to see winch cable while winching

• Weight rated jack to lift the machine

FIRE SUPPRESSION SYSTEM

• (2) – 65-gallon Aluminum Water Tank built into each pontoon

• Water Level Gauge for Tanks (Mounted in cab)

• Hydraulic Motor Driven, Self-priming Centrifugal High-

Volume Water Pump

• 15’ 1 1/2 Suction Hose for quick fill from ditch or lake

• 12’ and 25’ 1 1/2” Goodyear Pli-Cord Discharge Hose

• Fog & Stream Brass Spray Nozzle

• Camlock Hose Connections and Caps for Pump

LOW FLOW AND HIGH FLOW AUXILIARY

HYDRAULIC CIRCUITS:

• Low flow auxiliary hydraulic circuit 3-8gpm@3000psi and 2000 rpm

• High flow auxiliary hydraulic circuit 30 GPM max @

3500 psi/2600 rpm

MACHINE/ENGINE WARRANTY:

• Factory Direct

• 1 Year/1000 hr. bumper to bumper whichever comes first

• Engine warranty 3yr/2000 hr. 100% parts and labor

TRAILER SPECIFICATIONS:

• EXTRA LONG GALVANIZED TILT DECK TRAILER

WITH FIXED FRONT SECTION

• Maximum 8’4” wide x 20’ long tilt deck (deck height 36”- 38”, maximum overall length 20’ plus coupler)

• 2 x 10 #1 treated pine deck

• (2) 7000 lb top mount, high profile torsion bars

• Cambered with trailing arm position at 45 degrees

• Machine access ladder: bolt on steel galvanized tongue mounted for easy access to machine while loaded on trailer

• Bolt on galvanized steel step each side for deck access

• Load range E Goodyear or comparable 235/75R16 commercial tires, with galvanized rims

• Matching spare tire and rim, mounted on trailer

• 12” - 8 on 6.5 electric brakes

• Electric brake actuator with breakaway

• 2 5/16” forged adjustable coupler

• Minimum GVWR of 14,000 lbs

• Load rating 10,000 lbs

• 5000# tongue jack

• Gravity tilt hydraulic dampener and deck lockdown

• Hot dip galvanized steel frame with 6”x8” channel

• Four (4) ½” D-ring tie downs

• 2 – 36”x 3/8” galvanized safety chains per DOT specs with hooks

• Light package with (4) LED stop/tail, (4) 2” amber clearance lights and (7) red clearance lights w/ rubber grommet connectors

• Reflector package with (4) 2” red and (2) 2” amber and reflective tape side and rear per DOT standards

• 7 pin round lug light connector

• 4 tie down straps weight rated for the machine to secure machine to the trailer

• Coupler - 2 5/16" cast steel flat faced (20,000 lb);

adjustable height: 18.5, 23 or 27.5”

ATTACHMENT SPECIFICATIONS (HYDRAULIC

DRIVEN ROTARY CUTTER):

• Cutting Width: 84”

• Overall Width: 98”

• Cutting Capacity: 3" Diameter soft wood material

• Cutting Heads: Two (2) 38” Diameter

• Blades: Two (2) per Cutting Head; 1/2”x 3” x 11 1/2”

Heat Treated Steel

• Spindle Speed: Approx. 1600 rpms at 2000 rpms engine speed Blade Tip Speed: 19,600 fpm at 2000 rpms engine speed

• Drive Motors: Two (2), 1 per Cutting Head, rated @ 50 hp max power input

• Spindles: Two (2) Extra Heavy Duty with Timken Taper Roller Bearings; Spindle Seals well protected from wrap up, grease lubricated

• Deck: 1/4” thick 5086 Aluminum, with 3/8” thick 6061- T6 Aluminum Pivot Mounts with steel bosses

• Heavy duty height adjustable skis for supporting cutter deck. Replaceable wear pads on ski bottoms.

• Weight: approx. 820 lb

• Tilt & Lift System: Rear cutter 3-point hitch. Hydraulic with Mechanical Controls

• Safety Features: Foot Switch at operator seat in cab must be depressed to power cutter head. Push/pull dash mounted switch to engage cutter. Built in hydraulic blade brake that stops blades from free spinning after shutdown.

• Attachment: Quick Connect Hydraulic Hoses, quick-attach pull frame; 1 minute attach/detach time

Delivery Date:

August 31, 2025

Refuge POC:

Ben Halverson Assist. Fire Management Officer 608-684-0442 office

Delivery Location:

Horicon NWR W4279 Headquarters Rd Mayville WI 53050