Attachment_2-_Supply_Requirement_1.pdf
PDF 64 KB Posted
- Attached to
- Compact Track Loader w/ attch, Kirtland AFB, NM Federal contract opportunity
- Solicitation number
- DOIFFBO260077
About this file
This is a Statement of Work specifying the acquisition of a Skid Steer (Compact Track Loader) with attachments for Kirtland Air Force Base in Albuquerque, New Mexico.
Equipment Specifications and Requirements:
The required Skid Steer (CTL) must meet or exceed the following salient characteristics: a minimum 122 horsepower (SAE J1995) diesel engine with 221 cubic inch displacement, 4.7-inch bore, 3.9-inch stroke, and 406 lb/ft peak torque. Operating specifications include a rated operating capacity of 4,205 lbs at 35% tipping load, breakout force of 6,422 lbs on the lift cylinder and 9,963 lbs on the tilt cylinder, and a maximum tipping load of 12,015 lbs. The machine must have an operating weight of 12,705 lbs, ground clearance of 11 inches, and maximum overall height of 165.1 inches. Hydraulic system requirements include a maximum pressure of 4,496 psi and maximum flow of 40 gal/min. The equipment must include a 5-year/2,000-hour warranty, two copies of the owner's/operating manual, and one digital copy of the parts manual. Delivery must be provided to Building 645, S. Gate Road, Kirtland Air Force Base, with four-hour on-site machine orientation and operator training on service and safe operation techniques.
Attachments and Optional Packages:
The Skid Steer must be delivered with the LM2 Land Management Package (including increased 220L/58-gallon fuel capacity, turbo guard, exhaust stack wrap, DPF/emission component wraps, light guarding, quick disconnect guarding, and engine air inlet pre-cleaner with Part numbers 609-9666 auxiliary hydraulic cooler kit and 637-3002 reversing fan kit). Additional dealer-installed options include Part number 638-6745 (amber warning beacon), Part number 596-6898 (fire suppression system), and a 2.5 lb ABC fire extinguisher. Required attachments include Part number 475-2800 (67-inch mulcher head), Part number 610-2780 (72-inch brush hog), Part number 627-8751 (80-inch skeleton grapple bucket), Part number 541-0940 (79-inch 6-way blade), and an 86-inch multipurpose bucket with bolt-on cutting edge and spill guard. Contact for delivery is David Sanchez (505-274-4734) with Brent Higbee (208-912-5421) as secondary contact.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment_1-_Notice_of_Intent_1.pdf | ||
| Attachment_3-_Provisions_and_Clauses-_Notice_of_Intent_1.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
All products must meet standards greater than or equal too.
Name of Item: Skid Steer (CTL) Plus attachments listed in this Statement of Work
Salient Characteristics:
Engine
Gross Power - SAE J1995: must be at least 122hp
Bore: 4.7 inches
Displacement: 221 in
Net Power: ISO 120 hp
Net Power - SAE 82 hp
Peak Torque : 406 lb/ft
Stroke: 3.9 inches
Operating Specifications
Rated Operating Capacities - 35% Tipping Load: 4205 lbs.
Breakout Force - Lift Cylinder: 6422 lbs.
Breakout Force - Tilt Cylinder 9963 lbs.
Ground Pressure - With 450 mm/17.7 in Track: 4.5 psi
Rated Operating Capacities - 50% Tipping Load: 4033 lbs.
Rated Operating Capacity with Optional Counterweight 2996 lbs.
Tipping Load 12015 lbs.
Weights
Operating Weight 12705 lbs.
Dimensions
Clearance at Maximum Lift and Dump: 106.1 inches
Ground Clearance: 11 inches
Height - Top of Cab: 87.8 inches
Length - Track on Ground: 72.3 inches
Length - With Bucket on Ground: 152.8 inches
Maximum Overall Height: 165.1 inches
Overall Length - with Track: 75.8 inches
Turning Radius from Center - Bucket (racked) 91.3 in
Turning Radius from Center - Coupler 60.3 in
Turning Radius from Center - Machine Rear 76 in
Vehicle Width (450 mm/17.7 in tracks): 77.8 in
Maximum Dump Angle: 44.7°
Service Refill Capacities
Cooling System: 4.6 gal.
4.6 gal (US)
Engine Crankcase: 2.4 gal.
Fuel Tank: 36.9 gal.
Hydraulic System:10.8 gal
Hydraulic Tank: 6.9 gal.
Diesel Exhaust Fluid (DEF) Tank: 2.9 gal.
Power Train
Travel Speed - Forward or Reverse - One Speed: 5.2 mile/h
Travel Speed - Forward or Reverse - Two Speed: 7.8 mile/h
Hydraulic System
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure: 4496 psi
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow: maximum 40 gal/min
Hydraulic Flow - XE - Hydraulic Power (calculated): 103.9 hp
Attachments and Other Specifications Needed
Two copies of Owners/Operating Manual and One digital copy of parts manual
Warranty of 5 years/2000 hrs.
LM2 Land Management Package LM2 (HD1 + increased fuel capacity (220 L/58 gal), turbo guard, exhaust stack wrap, DPF/Emission component wraps, light guarding, quick disconnect guarding, hydraulic lines guard cover (under step), screw-to-connect auxiliary hydraulic couplings, and engine air inlet pre-cleaner.) This option will include:
Part number 609-9666 Auxiliary hydraulic cooler kit
Part number 637-3002 Reversing fan kit
Dealer installed options
Part number 638-6745 Amber Warning beacon kit
Part number 596-6898 Fire suppression system
Dealer procured and Installed 2.5 lb ABC Fire Extinguisher, mounted for emergency access
Attachments
Part number 475-2800 MH418 67-inch-wide working width Mulcher Head attachment
Part number 610-2780 BRX418 72-inch-wide cutting width Brush Hog attachment
Part number 627-8751 Graple Bucket 80-inch wide Skeleton Grapple Bucket attachment
Part number 541-0940 79-inch wide 6-way blade attachment
86-inch Multipurpose bucket w/ 1 piece bolt-on cutting edge, and spill guard to prevent material spillage over back of bucket
Delivery location and Point of Contacts
Dealer provides Delivery to Kirtland Air Force Base:
Bldg: 645 S. Gate Road, Albuquerque, NM 87116
POC: David Sanchez 505-274-4734 first then Brent Higbee 208-912-5421as a secondary contact
Four-hour Machine Orientation on site
Service and Safe operation techniques
File details come from the government source that posted it. Updated .