Attachment 2 - Statement of Work (SOW).pdf

STATEMENT OF WORK (SOW)

1. SCOPE: Remove markings and emergency lights from three (3) Chevy Silverado’s. Install

Marking and lights and siren equipment two (2) ford F-250s and one (1) Chevrolet 2500

Silverado.

2. Requirements:

2a. Install the equipment for two (2) Ford F250s. With the following equipment listed.

Equal times must have the same controls and functions.

2 ea./hav-c-as-840-11havis 8' console for light truck/SUV

2 ea./whe-gb2sp3e legacy duo w/c 54" b/c corner/ b/c front rear

Amber/blue whe-linsv2b

4 ea./linz6 v series combo, blue 180 warning /puddle light

4 ea./feniex: fsm-40-bw fusion 40 degree blue/white

4 ea./fn-4016 fusion l-bracket

4 ea./h-2209bw feniex cannon 120 blue/white hideaway

2 ea./whe-sa315p123 db. speaker 100 watt, nylon composite

2 ea./whe-295slsa6 whelen siren switchbox combo includes three

Position slide switch and six push on off switches

2 ea./uni-218036-0002 led spotlight for, back driver’s side

2 ea./uni-8938 install kit, driver’s side

2 ea./graffixshoppe custom decal kit

2 ea./installkit kit includes all wire, connectors, wire loom, Fuse blocks, and fuses

2b. Install the equipment for one (1) 2008 2500 Chevrolet. With the following equipment listed. Equal times must have the same controls and functions.

1 ea./hav-c-as-840-11 havis 8' console for light truck/SUV w/ mount

Kit

1 ea./whe-gb2sp3e legacy duo w/c 54" b/c corner/ b/c front rear

Amber/blue

2 ea./whe-linsv 2blinz6 v series combo, blue 180 warning /puddle light

2 ea./feniex: fsm-40-bw fusion 40 degree blue/white

2 ea./fn-4016 fusion l-bracket

2 ea./h-2209bw feniex cannon 120 blue/white hideaway

1 ea./whe-sa315p 123 db speaker 100 watt, nylon composite

1 ea./whe-295slsa6 whelen siren switchbox combo includes three

Position slide switch and six push on off switches

1 ea./uni-218036-0002 led spotlight for 2021 Silverado, back drivers

Side

1 ea./uni-8938 install kit, driver’s side

1 ea./ graffixshoppe custom decal kit

EXTERIOR GRAPHICS AND MARKINGS

All marking will be in accordance with Technical Manual 36-1-191 TECHNICAL AND

MANAGERIAL REFERENCE FOR MOTOR VEHICLE MAINTENANCE Para 2.78.3

Marking Security Forces Pickup Trucks. Security Forces pickup trucks (2-door and 4-door) used for security duties shall be marked as follows: The text “Police” with the Security Forces badge decal alongside of the text closest to the front of the vehicle will be centered between the front wheel well and the rear of the main cabin. All markings will be made using a temporary adhesive type material (example: magnetic or 3M vinyl), easily removable without damaging painted surfaces. Security Forces badges will be on a white or olive drab background, depending on vehicle color and local requirements. Markings must be uniform as described below and illustrated in Figure 2-33. Blue stripe will start midway above the front tire and curve over the back tire ending at least 5 inches away from the rear light. The beginning of the stripe will measure 5 inches wide and taper to 2.5 inches when curving over the rear wheel. Blue stripe will be positioned under the door handles and run parallel with the natural body lines of the vehicle.

- “Dial 9-1-1” Text Size: 4 inches letters and align with the end of the stripe at the rear light.

-Security Forces Badge Size: 11 inches tall

- “Police” Text - Sides: 11 inches letters

- “Police” Text - Rear: 7 inches letters

--Font-Faces:

- “Dial 9-1-1” Text - TW Cen MT Condensed

- “Police” Text - Bolt Bold

Color:

- “Police” text background and “Dial 9-1-1” text will be: Dark Navy Blue, Pantone 282 C or a color of similar hue and value.

Figure 2-23

3. LOCATION: All repairs will be accomplished at the vendor's facility within 50 Miles of

Seymour Johnson AFB.

4. WORKMANSHIP: All workmanship will comply with standard trade practices. The contractor shall provide all qualified personnel, equipment, and services required to install all

Equipment.

5. DOCUMENTATION: The Contractor will provide complete documentation package to include all manuals, drawings and schematics of installed equipment.

6. CLEANUP: The contractor is responsible to return all work sites to the condition in which they were found.

7. WARRANTY: The contractor will guarantee all workmanship and warranty all new equipment for a period of one year.