Attachment 2 - SPI AK12618124.pdf

PDF 635 KB Posted Apr 30, 2024

Attached to: DDAA SPI KITS Federal contract opportunity
Solicitation number: SP3300-24-Q-0132
Issued by: Defense Logistics Agency Distribution

About this file

Written by GovTribe AI · Apr 30, 2024

This document is a Special Packaging Instruction (SPI) for an Alternator, Part Number 57K4084, National Stock Number 2920-01-261-8124. The SPI provides detailed instructions on the proper methods for cleaning, drying, packing, and marking the alternator for shipment. It includes requirements for segregating and packaging various components, such as gaskets, terminal board assemblies, and hardware, into separate numbered packages. The SPI also specifies the use of a reusable drum container and support disk for the packaged alternator. The document includes illustrations and a bill of materials for the required packaging materials and hardware.

The related federal contract opportunity is a Combined Synopsis/Solicitation (Solicitation Number SP3300-24-Q-0132) issued by the Defense Logistics Agency Distribution for DDAA SPI Kits, including the Alternator SPI AK12618124 described in this document. The solicitation seeks bids for the procurement of these SPI kits.

View the file

Other files for this federal contract opportunity

Other files attached to DDAA SPI KITS, newest first.
File	Type	Posted
Amendment 0002.pdf	PDF	May 20, 2024
TAB 11 - Amendment 0001.pdf	PDF	May 6, 2024
Attachment 1 - SPI AK008306660.pdf	PDF	Apr 30, 2024
Attachment 5 - SPI AK10690483.pdf	PDF	Apr 30, 2024
Attachment 4 - SPI AK10730124.pdf	PDF	Apr 30, 2024
CSS SP3300-24-Q-0132.pdf	PDF	Apr 30, 2024

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 12 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K4084 (19207) ALTERNATOR,SUNSTRAN 19207 AK12618124

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-261-8124 9/10/01 -

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 140.1 4.348 17.3 X 16.9 X 25.7

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1D, SEE BLOCK 17

13. CLEANING

MIL-STD-2073-1D, CODE 1

14. DRYING

MIL-STD-2073-1D

SEE THE NOTES

15. PACKING

a. LEVEL A

MIL-STD-2073-1D AND NOTE P

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

A. REFER TO THE BILL OF MATERIALS FOR ALL OF THE REFERENCED ITEMS AND CIRCLED NUMBERS ON

THE ACCOMPANYING PAGES.

B. THIS KIT, AS SHOWN ON THE INITIAL RELEASE (OR REVISION) OF DRAWING 57K4084, CONSISTS OF THE

PARTS SHOWN BELOW:

SEGREGATED METHOD OF

PACKAGE NO. PART NUMBER CAGE NOMENCLATURE QTY. PRESERVATION

*1 12287177 19207 ALTERNATOR 1 10

12287177-1 19207 ALTERNATOR 1 10

2 12273833 19207 GASKET, ALTERNATOR 1 10

SEGREGATED PACKAGES 3 THROUGH 6 ARE ONLY APPLICABLE TO ONE OF THE ALTERNATORS, P/N 12287177-1.

IF ALTERNATOR P/N 12287177 IS RECEIVED, 2 SEGREGATED PACKAGES WILL BE REQUIRED. IF ALTERNATOR P/N 12287177-1 IS RECEIVED, THEN 6 SEGREGATED PACKAGES WILL BE REQUIRED.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 12 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K4084 (19207) ALTERNATOR,SUNSTRAN 19207 AK12618124

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-261-8124 9/10/01 -

THE FOLLOWING 6 ITEMS ARE REMOVED FROM ALTERNATOR P/N 12287177-1 BEFORE PACKAGING (SEE

NOTE H):

SEGREGATED METHOD OF

PACKAGE NO. PART NUMBER CAGE NOMENCLATURE QTY. PRESERVATION

**3 9029D46-1 83843 TERMINAL BOARD ASSY 1 10

**4 MS51968-14 96906 NUT, PLAIN 1 10

** AN960-816 88044 WASHER, FLAT 1 10

**5 MS35650-3382 96906 NUT, PLAIN 1 10

** AN960-616 88044 WASHER, FLAT 1 10

**6 952B405-1 83843 SHIM **** 10

THE FOLLOWING 6 ITEMS ARE NECESSARY TO REINSTALL THE TERMINAL BOARD ASSY, SEGREGATED

PACKAGE 3, FROM ALTERNATOR P/N 12287177-1, WHICH IS REMOVED IN NOTE H:

SEGREGATED METHOD OF

PACKAGE NO. PART NUMBER CAGE NOMENCLATURE QTY. PRESERVATION

***7 28B8803-86 83843 SCREW, MACHINE 1 10

*** AN502-10-12 88044 SCREW-MACHINE 2 10

*** AN960-10L 88044 WASHER, FLAT 3 10

***8 MS35338-43 96906 WASHER, LOCK-SPRING 3 10

*** MS35338-46 96906 WASHER, LOCK-SPRING 1 10

***9 MS38335-48 96906 WASHER, LOCK-SPRING 1 10

* ONLY ONE ALTERNATOR WILL BE INCLUDED IN THE KIT, EITHER 12287177 OR 12287177-1.

** THESE PARTS ARE REMOVED IN NOTE H.

*** THESE PARTS ARE NECESSARY TO REINSTALL THE TERMINAL BOARD ASSY REMOVED IN NOTE H. ALSO, REFERENCE THE BILL OF MATERIALS (ITEMS 23A, 23B, AND 23C).

**** THE QUANTITY OF SHIMS SUPPLIED BY THE MANUFACTURER OF THE ALTERNATOR MAY VARY.

C. MARKING, SEGREGATED PACKAGE.

MARK EACH SEGREGATED PACKAGE WITH THE SEGREGATED PACKAGE NUMBER.

D. MARKING.

1. MARK THE UNIT CONTAINER IN ACCORDANCE WITH MIL-STD-129. IN ADDITION, ATTACH A PACKING LIST TO THE UNIT CONTAINER IN ACCORDANCE WITH MIL-STD-129. ON THE PACKING LIST, IDENTIFY

THE ITEMS WITHIN EACH SEGREGATED PACKAGE TOGETHER WITH THEIR SEGREGATED PACKAGE

NUMBER.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 12 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K4084 (19207) ALTERNATOR,SUNSTRAN 19207 AK12618124

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-261-8124 9/10/01 -

2. MARK THE REUSABLE CONTAINER AS FOLLOWS: “METHOD II REUSABLE CONTAINER: DO NOT

DESTROY.”

E. 12273833, GASKET, ALTERNATOR, SEGREGATED PACKAGE 2 , QUANTITY 1.

1. POSITION THE GASKET BETWEEN THE STIFFENERS, ITEM 4, AND SECURE WITH TAPE, ITEM 16, IN

SUCH A MANNER THAT THE TAPE WILL NOT TOUCH THE PART OR EXERT PRESSURE THAT WOULD

SUBJECT THE PART TO SET OR DISTORTION.

2. PLACE THE PREPARED GASKET IN A BAG, ITEM 18, AND CLOSE THE BAG BY HEAT SEALING.

F. PREPARE THE BLOCKING ASSEMBLY AS FOLLOWS:

1. USING A GOOD GRADE OF EXTERIOR ADHESIVE, LAMINATE TWO PIECES OF PLYWOOD, ITEM 5, TOGETHER.

2. DRILL AND CUT THE LAMINATED PLYWOOD IN ACCORDANCE WITH THE ILLUSTRATION ON PAGE 8.

3. INSTALL EACH OF THE FOUR BLOCKING PIECES, ITEM 7, AS IT IS SHOWN ON PAGE 8, BY USING A GOOD QUALITY OF EXTERIOR ADHESIVE, AND DRIVING NAILS, ITEM 8B, THROUGH THE PLYWOOD, AND CLINCHING. FOUR NAILS SHALL BE USED IN EACH BLOCK, ARRANGED IN A STAGGERED

PATTERN. TO PREVENT SPLITTING, EITHER BLUNT THE NAILS, OR DRILL PILOT HOLES THROUGH

THE BLOCK THAT ARE SLIGHTLY SMALLER THAN THE DIAMETER OF THE NAIL.

4. INSTALL THE SUPPORT BLOCKS, ITEM 6, AS SHOWN ON PAGE 8, BY USING A GOOD QUALITY EXTERIOR ADHESIVE, AND DRIVING THE NAILS, ITEM 8A, THROUGH THE PLYWOOD AND INTO THE

BLOCKS. THREE NAILS SHALL BE USED IN EACH BLOCK.

5. PLACE THE METAL MOUNTING RING, ITEM 9, ON THE UNDERSIDE OF THE BLOCKING ASSEMBLY, AND THE METAL PLATE, ITEM 10, ON TOP OF THE BLOCKING ASSEMBLY, POSITIONED BETWEEN THE

SUPPORT BLOCKS, ITEM 6, AS IT IS ILLUSTRATED ON PAGE 9.

6. WITH THE HOLES ALIGNED, SECURE WITH HARDWARE, ITEMS 11, 12, 13, AND 14, IN SIX PLACES, AS

IT IS SHOWN ON PAGE 9.

G. 12287177, ALTERNATOR, SEGREGATED PACKAGE 1, QUANTITY 1.

1. IF THE ALTERNATOR HAS ALREADY BEEN CAPPED/PLUGGED, RECAPPING/REPLUGGING MAY BE

ELIMINATED. OTHERWISE, CAP/PLUG THE APPROPRIATE PORT/CONNECTOR ON THE ALTERNATOR

AS FOLLOWS:

PORT/CONNECTOR CAP/PLUG

MS33649-8 3A

MS33649-12 3B

J1 2A J2 2B

2. POSITION THE ALTERNATOR SO THAT THE SPLINE FITS IN THE HOLE IN THE CENTER OF THE

BLOCKING ASSEMBLY, AS IT IS ILLUSTRATED ON PAGE 9.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 12 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K4084 (19207) ALTERNATOR,SUNSTRAN 19207 AK12618124

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-261-8124 9/10/01 -

3. WITH THE FACE OF THE MOUNTING RING, ITEM 9, FLUSH WITH THE FACE OF THE ALTERNATOR, PLACE THE CLAMP, ITEM 15, AROUND THE MOUNTING RING AND THE ALTERNATOR, AND TIGHTEN.

SEE THE ILLUSTRATION ON PAGE 9.

4. PROCEED TO NOTE K.

H. 12287177-1, ALTERNATOR, SEGREGATED PACKAGE 1, QUANTITY 1.

1. IF THE ALTERNATOR HAS ALREADY BEEN CAPPED/PLUGGED, RECAPPING/REPLUGGING MAY BE

ELIMINATED. OTHERWISE, CAP/PLUG THE APPROPRIATE PORT/CONNECTOR ON THE ALTERNATOR

AS FOLLOWS:

PORT/CONNECTOR CAP/PLUG

MS33649-8 3A

MS33649-12 3B

J1 2A J2 2B

2. REMOVE THE TERMINAL BOARD ASSY (PART NUMBER 9029D46-1) FROM THE ALTERNATOR, AND

PREPARE THE FOLLOWING ITEMS AS DESCRIBED BELOW:

a. REMOVE NUTS, PLAIN (PART NUMBERS MS51968-14 AND MS35650-3382), WASHERS, LOCK-SPRING (PART NUMBERS MS35338-48 AND MS35338-46), AND WASHERS, FLAT (PART

NUMBERS AN960-816 AND AN960-616). DISCARD THE WASHERS, LOCK-SPRING.

b. CONSOLIDATE THE NUT, PLAIN (PART NUMBER MS51968-14) AND WASHER, FLAT (PART NUMBER AS960-816) FROM H.2.a. INTO A BAG, ITEM 19B. CLOSE THE BAG BY HEAT SEALING, TAPING, OR

STAPLING. THIS FORMS SEGREGATED PACKAGE 4.

c. CONSOLIDATE THE NUT,PLAIN (PART NUMBER MS35650-3382) AND WASHER, FLAT (PART NUMBER AN960-616) FROM H.2.a. INTO A BAG, ITEM 19B. CLOSE THE BAG BY HEAT SEALING, TAPING, OR STAPLING. THIS FORMS SEGREGATED PACKAGE 5.

d. REMOVE THE SCREW, MACHINE (PART NUMBER 28B8803-86), THE SCREW-MACHINE(S) (PART

NUMBER AN502-10-12), THE WASHERS, LOCK-SPRING (PART NUMBER MS35338-43), AND THE

WASHERS, FLAT (PART NUMBER AS960-10L) THAT SECURE THE TERMINAL BOARD ASSY TO THE

ALTERNATOR STATOR HOUSING. DISCARD THE WASHERS, LOCK-SPRING (PART NUMBER

MS35338-43).

e. CONSOLIDATE THE ITEMS THAT WERE NOT DISCARDED IN H.2.d. INTO A BAG, ITEM 19B, AND

CLOSE THE BAG BY HEAT SEALING, TAPING, OR STAPLING. THIS FORMS SEGREGATED

PACKAGE 7.

f. LIFT THE TERMINAL BOARD ASSY OFF OF THE ALTERNATOR.

g. WRAP THE TERMINAL BOARD ASSY WITH CUSHIONING, ITEM 1, AND SECURE IT WITH TAPE, ITEM 17A. THIS FORMS SEGREGATED PACKAGE 3.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 12 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K4084 (19207) ALTERNATOR,SUNSTRAN 19207 AK12618124

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-261-8124 9/10/01 -

h. REMOVE THE SHIMS (PART NUMBER 952B405-1) FROM EACH TERMINAL STUD, AND PLACE THEM INTO A BAG, ITEM 19A. CLOSE THE BAG BY HEAT SEALING, TAPING, OR STAPLING. THIS FORMS

SEGREGATED PACKAGE 6

i. PLACE THE TOTAL QUANTITY OF WASHERS, LOCK-SPRING, ITEMS 23a AND 23b, INTO A BAG, TEM 19A. CLOSE THE BAG BY HEAT SEALING, TAPING, OR STAPLING. THIS FORMS

SEGREGATED PACKAGE 8.

j. PLACE THE WASHER, LOCK-SPRING, ITEM 23C INTO A BAG, ITEM 19A. CLOSE THE BAG BY HEAT

SEALING, TAPING, OR STAPLING. THIS FORMS SEGREGATED PACKAGE 9.

k. CONSOLIDATE THE BAGGED ITEMS FROM H.2.b., H.2.c., H.2.e., H.2.h., H.2.i., AND H.2.j. INTO A BAG, ITEM 19C, AND CLOSE THE BAG BY HEAT SEALING, TAPING, OR STAPLING. IDENTIFY WITH

THE FOLLOWING: “TERMINAL BOARD ASSY HARDWARE”, IN ADDITION TO THE NOTE C

MARKING.

3. POSITION THE ALTERNATOR SO THAT THE SPLINE FITS IN THE HOLE IN THE CENTER OF THE

BLOCKING ASSEMBLY, AS IT IS ILLUSTRATED ON PAGE 9.

4. WITH THE FACE OF THE MOUNTING RING, ITEM 9, FLUSH WITH THE FACE OF THE ALTERNATOR, PLACE THE CLAMP, ITEM 15, AROUND THE MOUNTING RING AND THE ALTERNATOR, AND TIGHTEN.

SEE THE ILLUSTRATION ON PAGE 9.

I. SECURE THE CUSHIONED TERMINAL BOARD ASSY FROM NOTE E TO THE ALTERNATOR WITH TAPE, ITEM 17B, IN THE ORIENTATION SHOWN ON PAGE 9. WRAP THE TAPE AROUND THE ALTERNATOR AND THE

TERMINAL BOARD ASSY TWICE, TO PREVENT ANY MOVEMENT OF THE TERMINAL BOARD ASSY.

J. SECURE THE CONSOLIDATED ITEMS FROM NOTE H.2.k. TO THE ALTERNATOR WITH TAPE, ITEM 17A.

K. SECURE THE PACKAGED GASKET FROM NOTE E TO THE ALTERNATOR WITH TAPE, ITEM 17A, IN SUCH A

WAY AS TO AVOID BENDING THE STIFFENERS.

L. SLIDE A BAG, ITEM 20, OVER THE ALTERNATOR AND THE ITEMS SECURED TO IT. GATHER THE BAG MATERIAL UP BETWEEN THE CLAMP, ITEM 15, AND THE BLOCKING ASSEMBLY, WHERE THE MOUNTING RING, ITEM 9, IS ATTACHED. SECURE WITH TAPE, ITEM 17A, IN A MANNER THAT TIGHTLY WRAPS THE

GATHERED BAG MATERIAL AROUND THE CIRCUMFERENCE OF THE MOUNTING RING.

M. ATTACH THE DESSICANT, ITEM 21, TO THE BAG FROM NOTE L WITH TAPE, ITEM 17A.

N. PLACE THE ALTERNATOR IN THE DRUM, ITEM 22, ALLOWING THE BLOCKING ASSEMBLY TO REST ON THE INVERTED BEAD, SHOWN ON PAGE 9. PLACE THE SUPPORT DISK (SEE PAGE 6) ON TOP OF THE

SUPPORT BLOCKS, ITEM 6.

O. SEAL THE DRUM WITH THE PROVIDED STYLE 1 COVER, AND THE LOCKING RING.

P. THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL A AND LEVEL B SHIPPING CONTAINER. FOR BOTH LEVEL A AND B, WHEN MULTIPLE QUANTITIES ARE TO BE SHIPPED TO THE SAME DESTINATION, EXTERIOR

PACKS WITHOUT SKIDS SHALL BE PALLETIZED. MIL-HDBK-774 MAY BE USED FOR GUIDANCE.

Q. INSPECT THE PRESERVATION (SEE NOTE B), THE SEGREGATED PACKAGES, CONSOLIDATION PACKS (WHEN A METHOD IS SPECIFIED), UNIT PACK AND PACKING IN ACCORDANCE WITH MIL-STD-2073-1D AND

THE APPLICABLE CONTAINER SPECIFICATION.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 6 of 12 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K4084 (19207) ALTERNATOR,SUNSTRAN 19207 AK12618124

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-261-8124 9/10/01 -

METAL PLATE

4-1/2

60 0

2 DIA. THRU.

THICKNESS:

12 GAUGE

1/4 DIA. THRU. 6 PLACES

5-13/16 DIA.

EQUALLY SPACED.

SUPPORT DISK3/4

2 DIA.

15-1/4 DIA.

- MAKE FROM ITEM NUMBER 5

ON THE BILL OF MATERIALS.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 7 of 12 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K4084 (19207) ALTERNATOR,SUNSTRAN 19207 AK12618124

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-261-8124 9/10/01 -

200 0 015'+

5 DIA.

6.625 +

.000

.005 DIA.

1/4 DIA. THRU.-

0 CSK. 9/16 DIA.

6 HOLES EQUALLY SPACED.

6.24 +

.00

.04 DIA.

.148 +

.000

.005

5/8

DIA.5.81 .06+

MOUNTING RING 9

3/4

65 0

5-1/8 R 7-5/8 R

BLOCKING

SECTION A-A

BLOCKING

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 8 of 12 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K4084 (19207) ALTERNATOR,SUNSTRAN 19207 AK12618124

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-261-8124 9/10/01 -

1-1/2

7-5/8 R

5-13/16

SUPPORT

BLOCK

PLACEMENT

6 R

2 PLACES

1-1/4

2 PLACES

SUPPORT

BLOCK

PLACEMENT

TOP VIEW

3-1/83-1/8

1-1/2

EQUALLY SPACED.

1/4 DIA. 6 PLACES

2-1/4

4-1/4

SEE NOTE F.

2 DIA.

BLOCKING ASSEMBLY (SEE NOTE F)

6 2 PLACES

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 9 of 12 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K4084 (19207) ALTERNATOR,SUNSTRAN 19207 AK12618124

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-261-8124 9/10/01 -

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 10 of 12 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K4084 (19207) ALTERNATOR,SUNSTRAN 19207 AK12618124

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-261-8124 9/10/01 -

BILL OF MATERIALS

DESCRIPTION SIZE SPECIFICATION DATA QTY.

1 CUSHIONING 14 X 12 X 1/4 A-A-59135, CLASS 2, GRADE A. 1

2* CAP MS90376.

2A MS90376-8R. 1

2B MS90376-16R. 1

3* PLUG NAS833.

3A NAS833-8. 1

3B NAS833-10. 1

4 STIFFENERS 7 X 7 ASTM-D4727, TYPE CF, CLASS D,

GRADE 125.

5 PLYWOOD 15-1/4 DIA. X 3/4 A-A-55057, TYPE A, EXTERIOR

EXPOSURE, GRADE C-D.

6 SUPPORT BLOCK 1-1/2 X 2 X 12 ASTM-D6199-97, GROUP II OR III. 2

7 BLOCKING SEE PAGE 7 ASTM D6199-97, GROUP IV, CLASS 1. 4

8 NAILS COMMERCIAL GRADE BOX CEMENT

COATED.

8A 8d 6

8B 10d 16

9 MOUNTING RING SEE PAGE 6 MATERIAL: STEEL ASTM-A576 OR

ASTM-A108. FINAL PROTECTIVE

FINISH: MIL-STD-171 5.3.1.3 OR

5.3.2.3.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 11 of 12 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K4084 (19207) ALTERNATOR,SUNSTRAN 19207 AK12618124

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-261-8124 9/10/01 -

BILL OF MATERIALS

DESCRIPTION SIZE SPECIFICATION DATA QTY.

10 METAL PLATE SEE PAGE 5 MATERIAL: STEEL ASTM-A576 OR

ASTM-A108. FINAL PROTECTIVE

FINISH: MIL-STD-171 5.3.1.3 OR

5.3.2.3.

11** MACHINE SCREW 1/4 X 2-1/2 82 DEGREE FLAT COUNTERSUNK

HEAD.

12** FLAT WASHER 1/4 6

13** LOCK WASHER 1/4 HEAVY DUTY. 6

14** HEX NUT 1/4 6

15 CLAMP PART NUMBER 12310653, NSN:

5340-01-139-3747, FSCM: 19207.

16 TAPE 3/4 X AS REQUIRED A-A-883, TYPE I. 4

17 TAPE MIL-T-22085, TYPE II.

17A 2 X AS REQUIRED A/R

17B 2 X 66 1

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 12 of 12 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K4084 (19207) ALTERNATOR,SUNSTRAN 19207 AK12618124

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2920-01-261-8124 9/10/01 -

BILL OF MATERIALS

DESCRIPTION SIZE SPECIFICATION DATA QTY.

18 BAG 10 X 10 MIL-B-117, TYPE I, CLASS E, STYLE 1. 1

19 BAG MIL-B-117, TYPE I, CLASS B, STYLE 2.

19A 2-1/2 X 3 3

19B 3 x 5 3

19C 4 X 8 1

20 BAG 24 X 30 MIL-B-117, TYPE I, CLASS B, STYLE 2,

6 MIL.

21 DESICCANT MIL-D-3464, TYPE 1. 88 UNITS

22*** DRUM MS27683-1-I (MODIFIED). 1

23 LOCK WASHER

23A MS35338-43. 3

23B MS35338-46. 1

23C MS35338-48. 1

* OR EQUIVALENT

** COMMERCIAL QUALITY STEEL IS ACCEPTABLE WITH ZINC PLATING, OR PRESERVATIVE COATING

CONFORMING TO MIL-PRF-16173, GRADE 4.

*** THE DRUM IS MODIFIED AS IT IS SHOWN ON PAGE 9.

File details come from the government source that posted it. Updated Apr 30, 2024.