Attachment 2 - SALIENT CHARACTERISTICS_Wood Mill Table Saw.pdf

SALIENT CHARACTERISTICS

For

Heavy Duty Table Saw

1.0. SCOPE OF EQUIPMENT:

All proposed products shall meet or exceed the following specifications outlined in this Salient Characterists. All items shall be delivered to the 309th Aerospace Maintenance and Regeneration Group (AMARG) – FOB DESTINATION

1.1. PRODUCT PERFORMANCE SPECIFICATION:

Heavy Duty Table Saw(s) must meet the following specifications:

SPECIFICATIONS

3 ea, Heavy Duty Table Saws Saw Capacity: • 16”-18” saw blade Capacity o Must have the ability to be lowered completely or no-more than 1 inch of the blade expose to allow a safety cover.

• Cross Cut capacity must be 32”

• Must have a 45 degree tilt

• 4” Vertical Saw Adjustment

• Must be electronically balanced o Each table saw must be tested with modern vibration analyzing equipment—vendor must submit a finalized report of said vibration test

Electric Requirement: • 220 Volts AC, 3 Phase

Motor Requirement: • Heavy Duty Direct Motor Drive 7 ½ hp. motor

• Heavy duty sealed bearings

• Enclosed cooling fan

• 1” Arbor diameter with detachable option o 3600 RPM

• Automatic brake—activated by the start/stop push button

Table Saw Top: • Height of table top from floor must be 34” o Wood Mill currently has eight (8) 34” tables that will be used in conjunction with the new table saw

• Must have a precision table top o Seasoned, heavily ribbed and precision planed and polished—to maintain accuracy across the life of the saw

• Must have table top gauges o Minimum of 2 (two) sliding o Combination o Cut-off or miter with dovetail

Table Saw Base: • Must be 1 piece of heavy duty casting o As an indicator of heavy duty material, its required that the unit weigh should be 1500 lbs.+, any alternatives that weighs in less than that, will not be considered “heavy duty” This is a requirement because anybody can place a

“heavy duty” sticker on anything.

• All components must be securely attached to the base to prevent vibrations

• Must have a 6” outlet at the bottom to allow dust connections

• Standard table size must be no less than 36” x 44” to meet current equipment layout Table Saw extra Tables with legs:

• 24” extended Table to RIGHT - 56” rip capacity o 1 per table saw

• 12” extended Table to LEFT – 21” rip capacity o 1 per table saw

Fence: • Biesmeyer “style” Double Face Fence or rack and pinion style o 1 per table saw o Aftermarket install acceptable

Warranty: • Must come with a manufactured warranty of 1 year or longer.

Safety: • Must have an automatic electric break

• 110v push-button start/stop

• Saw Guard

• NEMA 12 Electric with Fused Disconnect

• NEMA Electrical requirements

• Must meet OSHA Safety requirements