Attachment 2 - Salient Characteristics List.pdf

105 KB Posted

Attached to
2 MXS Wash Trailer
Solicitation number
FA460824QC064
Issued by

About this file

Written by GovTribe AI ·

This document is an Attachment 2 - Salient Characteristics List that describes the requirements for an Aircraft Wash System to be procured under Solicitation FA460824QC064.

The key details are:

  • The system must comply with Service Manual 1-1-691
  • The system must provide a water pressure of at least 4 gallons per minute (GPM) at 3000 pounds per square inch (PSI)
  • The system must deliver cleaning solution in a non-foam state at 2.5 GPM at 30 PSI
  • The system must use 40-degree flat fan spray nozzles
  • The system must include a 5/8" rubber inlet water hose rated for 200 PSI
  • The system must provide a heat rise of 105-110 degrees with a maximum temperature of 210 degrees
  • The system must include a 100' high-pressure hose, pressure gauge, and ON/OFF switch
  • The solvent spray guns must require 14 cubic feet per minute at 50 PSI to siphon
  • The compressed air pressure must be 40-110 PSI
  • The tank must be stainless steel with an over pressure relief valve
  • The system must support dual gun operation

View the file

Other files

File Type Posted
Attachment 4 - Solicitation QA.pdf PDF
Amendment 01 Wash Trailer.pdf PDF
Attachment 2 Updated Salient Characteristics List.pdf PDF
Combined Synopsis and Solicitation- 24QC064.pdf PDF
Attachment 1 - Provisions and Clauses.pdf PDF
Attachment 3 - Offeror Representations and Certifications.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Attachment 2 – Salient Characteristics List

FA460824QC64

AIRCRAFT WASH SYSTEM SALIENT CHARACTERISTICS

• Compliant with Service Manual 1-1-691

• Water pressure equal to or greater than 4 gallon per minute (GPM) at 3000 pounds per square inch (PSI)

• Deliver cleaning solution in a non-foam state at 2.5 GPM at 30 PSI

• 40-degrees (deg) flat fan spray nozzles

• 5/8” rubber inlet water hose/ 200 PSI rated

• 105-110 deg Heat Rise, 210 deg Max Temperature

• 100’ High-Pressure Hose

• Pressure gauge

• ON/OFF Switch

• Solvent Spray guns require 14 cubic feet per minute at 50 PSI to siphon

• Compressed air pressure: 40-110 psi

• Stainless steel tank

• Over pressure relief valve

• Dual gun operation

File details come from the government source that posted it. Updated .