Attachment 2_Salient Characteristics.pdf
PDF 66 KB Posted
- Attached to
- Vehicle Lifts
- Solicitation number
- W50S91-25-Q-A006
- Issued by
-
Department of the Army National Guard
About this file
Attachment 2 provides the salient characteristics for three 2-Post Vehicle Lifts to be procured by the 171st Air Refueling Wing. The vehicle lifts must have a lifting capacity of at least 20,000 lbs, posts separated by 126 inches, a lifting height of 78 inches, and double telescopic arms 76 inches long. Additional requirements include ALI certification, a 2-year parts warranty, 1-year labor warranty, and vendor-provided on-site training and installation.
The vendor must perform a mandatory walk-through with the Civil Engineer Squadron representative before installation, complete all necessary utility rework and minor facility repairs, and ensure proper equipment installation according to manufacturer requirements. The vendor is responsible for shipping, delivering, and installing the lifts, with a requirement to complete the entire project within 120 calendar days of contract award. The solicitation is a 100% small business set-aside with a NAICS code of 333921 and a small business size standard of 1,000 employees.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1_Provisions and Clauses.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 2 – Salient Characteristics
2-Post Vehicle Lift – Quantity 3
Lifting capacity of at least 20,000 lbs.
Posts separated by a minimum of 126 inches.
Lifting Height of at least 78 inches.
Pick Up Height of at least 5 inches.
Double Telescopic Arms with a length of at least 76 inches
Lifting Time of less than one minute.
Power Output of at least 5 HP.
Vehicle Lifts must have a 2-year minimum warranty on parts.
Vehicle Lifts must have a 1-year minimum warranty on labor and installation.
Vehicle Lifts must be Automotive Lift Institute (ALI) certified.
Vendor must be Automotive Lift Institute (ALI) certified.
Vendor responsible for shipping and delivering lifts to the installation site.
Vendor shall provide on-site training of the equipment operation and maintenance requirements.
Vendor shall be responsible for installation of new lifts.
a. Prior to equipment installation work, a mandatory walk through shall be scheduled and accomplished with the Civil Engineer Squadron (CES) representative(s) to review equipment utility requirements for the building or installation location. CES points of contact are Maj Shanna Denny, 412-776-7539, shanna.denny.2@us.af.mil.
b. Vendor shall perform all required installation work, to include minor facility repair work, to properly install the lifts in accordance with manufacture’s requirements.
c. Vendor shall rework existing utilities including, but not limited to, electrical wiring, compressed air, control wiring, and all other necessary utilities to properly complete installation of the new equipment. For the equipment utility connections and rework, the contractor shall comply with all applicable local, state, and federal instructions, codes, standards, and regulations.
d. After installation is complete, the contractor shall perform a startup of the equipment and ensure proper operation of the new equipment in accordance with manufacturer requirements.
File details come from the government source that posted it. Updated .