Attachment_2_PKGRQMT_REPORT.pdf
PDF 72 KB Posted
- Attached to
- F108 Engine Mod 14 Container (NSN 8145-01-204-0865 PL) Federal contract opportunity
- Solicitation number
- FA812224Q0002
About this file
This document provides packaging requirements and instructions for a federal solicitation. The solicitation is for an F108 Engine Mod 14 Container with national stock number 8145-01-204-0865 PL, issued by the Department of the Air Force Materiel Command Air Force Sustainment Center. Packaging must meet MIL-STD 129 and MIL-STD 2073-1 standards for preservation, packing, and marking. Wood packaging materials must be heat treated and certified under ISPM15. Existing containers in the DoD inventory should be evaluated for reuse before developing new engineered containers, which require written Air Force acceptance. Shipping containers must be marked per MIL-STD-129 and include additional markings as specified on the provided AFMC Form 158.
The document outlines packaging requirements that offerors must follow when preparing proposals or deliveries in response to the identified federal solicitation for an F108 engine modification container.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA812224Q0002 Amd 02.pdf | ||
| FA812224Q0002 Amd 01.pdf | ||
| Exhibit_A_CDRL.pdf | ||
| Attachment_3_TRNSPDATA_REPORT.pdf | ||
| Attachment_4_DID.pdf | ||
| FA812224Q0002.pdf | ||
| Attachment_1_CFMI.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PACKAGING REQUIREMENTS
PURCHASE INSTRUMENT NUMBER: FD20302101200-02 VERSION: 2
MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN
PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAA No Packaging Data Required
ITEM(S):
8145DTH210099PL
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
VENDOR PACKAGING INSTRUCTIONS:
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAB Engineered or Specialized Container MIL A
ITEM(S):
8145012040865PL
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
VENDOR PACKAGING INSTRUCTIONS:
Engineered or Specialized Containers (CDRS)
a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1, Standard Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor's recommendation shall be based on information received from queries using DI-PACK-80683
Page 1 of 2AFMC 158 Version 2Generated by PRPS using Jasper Reports on 30 Mar 2023
PACKAGING REQUIREMENTS
(packaging specialists fills in current edition), Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 (packaging specialists fills in current edition), Container Design and Retrieval System (CDRS) Data Input.
Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.
ORGANIZATION / OFFICE SYMBOL:
406 SCMS / GULAA
PACKAGING SPECIALIST:
Cox, Sean R
PHONE NUMBER:
405-582-1901 / 852-1901
SIGNATURE:
//SIGNED//Cox, Sean R
DATE:
23081 - 22 MAR 2023
Page 2 of 2AFMC 158 Version 2Generated by PRPS using Jasper Reports on 30 Mar 2023
File details come from the government source that posted it. Updated .