Attachment 2 - Facility Definitions - 70Z03826IH0000003.pdf
PDF 185 KB Posted
- Attached to
- Overhaul of Oxygen Regulator(s)
- Solicitation number
- 70Z03826IH0000003
About this file
This document is Attachment 2 – Facility Definitions for a contract numbered 70Z03826IH0000003, detailing three types of facility certifications required for a contractor performing repair services. For FAA-Certified Facilities, contractors must submit a repair station certificate, a capabilities list identifying relevant part numbers, and a self-evaluation affirming they have necessary resources and trained personnel. For OEM Certified Facilities, contractors must provide documentation from the Original Equipment Manufacturer specifically identifying the part numbers to be serviced, or provide a point of contact for verification. For DoD or USCG Certified Facilities, contractors must submit a signed repair source approval memo indicating approval to repair specific components listed in the Schedule.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1 - List of Components - 70Z03826IH0000003.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 2 – Facility Definitions – 70Z03826IH0000003
FAA-Certified Facility To demonstrate that the Contractor is properly certified by the FAA, the Contractor must submit their repair station certificate. If the Contractor holds a limited rating, the Contractor must also submit: 1) a capabilities list identifying the relevant part numbers specified on the schedule of services IAW 14 CFR 145.215, and 2) a self-evaluation affirming that the repair station has all of the housing, facilities, equipment, material, technical data, processes, and trained personnel in place to perform the work on the articles identified in the schedule of services IAW 14 CFR 145.215. At the request of the Contracting Officer, the Contractor may be required to submit a copy of the repair station manual and quality control manual.
OEM Certified Facility To demonstrate that the Contractor is certified by the OEM, the Contractor must submit documentation from the OEM stating that the Contractor is certified to perform the services required herein. This documentation must specifically identify the part numbers identified in the Schedule. Otherwise, the Contractor must provide an OEM point of contact that will allow the USCG to independently verify the Contractor is, in fact, certified by the OEM to repair the components listed on the Schedule.
DoD or USCG Certified Facility To demonstrate that the Contractor is certified by a DoD service or the USCG to perform repair services on the components listed on the Schedule, the Contractor must provide a signed repair source approval memo indicating the Contractor is approved to repair the components listed on the Schedule.
File details come from the government source that posted it. Updated .