Attachment 2.pdf

108 KB Posted

Attached to
DELRIN AF DE 588 ROD AND SHEET
Solicitation number
SPMYM325Q9023
Issued by

About this file

Written by GovTribe AI ·

This document is a federal contract attachment specifying technical requirements for a Delrin plastic sheet manufactured by DuPont (AF DE 588). The contract (SPMYM325Q9023) requires a specific plastic sheet with precise material properties, including 1-1/4" thick x 12" wide x 48" long dimensions. The technical specifications detail exact mechanical and physical characteristics to be tested using ASTM methods, such as specific gravity (1.50 - 1.57), tensile strength (6100 PSI minimum), melting point (172 - 184 deg C), and Teflon fiber content (18 - 23%). Additional requirements include dimensional stability testing in a mineral oil bath and submission of mechanical property test reports and compliance certification through Exhibit A, Sequences A001 and A002.

View the file

Other files

File Type Posted
Combined Synopsis Solicitation SPMYM325Q9023 Fillable Format.pdf PDF
Exhibit A.pdf PDF
Exhibit B.pdf PDF
Attachment 1.pdf PDF
Combined Synopsis Solicitation SPMYM325Q9023.pdf PDF
Full Text Provisions and Clauses 25Q9023.pdf PDF
Security Agreement For Protection of NNPI.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CONTRACT

PRINTED 04/25/2023 ATTACHMENT PAGE

9330 1X

C DESCRIPTION/SPECIFICATIONS

C. DECRIPTION/SPECIFICATION

C.1 MANUFACTURE DELRIN, DUPONT AF DE 588 IN ACCORDANCE WITH NAVSEA DWG 803-4384678 REV C , GENERAL NOTES 7.C.(9) AND 7.D WITH ALL APPLICABLE NOTES, EXCEPT AS AMPLIFIED OR MODIFIED

HEREIN:

ITEM PROPERTY ASTM TEST METHOD (L/R) VALUE

(A) SPECIFIC GRAVITY D792 (NOTE 1) 1.50 - 1.57

(B) MELTING POINT D2133 OR D3418 172 - 184 DEG C (342 - 363 DEG F)

(C) TENSILE STRENGTH (MIN) D638 (NOTES 1 & 4) 6100 PSI

(D) TENSILE IMPACT (MIN) D1822 TYPE S (NOTES 1 & 4) 5 FT-LB/SQ IN

(E) COMPRESSIVE STRESS D695 2100 @ 1% DEF.

(MIN - PSI) (NOTES 1 & 4) 11,000 @ 10% DEF.

(F) WATER ABSORPTION D570 .30% MAX 24 HOURS

(G) ROCKWELL HARDNESS (R) D785 (NOTE 1) 115 +/- 15

(H) TEFLON FIBER CONTENT 2584 OR D3171 (NOTE 2) 18 - 23%

(I) DIMENSIONAL CHANGE (NOTE 3) .7% MAX

NOTES:

1. Material conditioning prior to test is at the vendor�s option.

2. Teflon Fiber Content - Use Dupont Gravimetric method. White Teflon string inclusions shall not exceed the following A. Diameter 1/32"

B. Length 1/8"

C. Density 6 indications per 100 SQ IN

ITEM NO.

STOCK NUMBER

9330-LL-L01-0024

SPECIAL CHARACTERISTICS

1-1/4" THK X 12"WIDE X 48"LONG **DWG ON FILE AT CODE 245.1***

ITEM NAME SHEET, PLASTIC (DELRIN AF DE 588)

SECTION B

SMIC

9G

SPMYM325Q9023

2 1 of 2

CONTRACT

PRINTED 04/25/2023 ATTACHMENT PAGE

9330 1X

3. The test method to determine dimensional stability shall be performed as follows: The test specimens (finished pieces) tested shall be measured at 23 +/- 3 deg C (73 +/- 5F) and placed in a mineral oil* bath maintained at 160 +/- 3 deg C (320 +/- 5F) the specimens shall remain in the bath for six (6) hours at temperature and allowed to slow cool in the bath at a rate not to exceed 23 +/- 3 deg C (73 +/- 5F) per hour. When the bath reaches 23 +/- 3 deg C (73 +/- 5F), the test specimens shall be removed and measured. The percent change in each dimension, outside diameter, inside diameter and thickness shall not be greater than the value specified.

*Mineral oil meets the specification as listed below:

Description.....................................Passes U.S.P. Test (USP XX, P.1143) Solubility.........................................Passes U.S.P. Test (USP XX, P.1143) Neutrality........................................Passes U.S.P. Test (USP XX, P.532) Readily Carbonizable Substances...Passes U.S.P. Test (USP XX, P.532) Limit of Polynuclear Compounds....Passes U.S.P. Test (USP XX, P.532) Solid Paraffin...................................Passes U.S.P. Test (USP XX, P.532) Specific Gravity @ 25 deg C (77 deg F).0.8600 to 0.8900 Viscosity @ 37.8 deg C (100F).........73.6 to 84.4 Centistokes (340-390 SUS) Flash Point Cleveland Open Cup�..420 deg F (216C) (Typical) Refractive Index @ 20C (68F)..........1.480 (Typical)

C.2 DATA REQUIREMENTS:

C.2.1 TEST REPORTS (MECHANICAL PROPERTY TEST RESULTS), SEE EXHIBIT A, SEQUENCE A001

C.2.2 CERT. OF COMPLIANCE. SEE EXHIBIT A, SEQUENCE A002

C.3 C500 MERCURY CONTROL (SUPPLIES)

D PRESERVATION/PACKAGING/PACKING

D.1 D4 PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)

E INSPECTION ACCEPTANCE

E.1 E1 RESPONSIBILITY FOR INSPECTION

H SPECIAL PROVISIONS

K Section

L Section

M Section

SPMYM325Q9023

File details come from the government source that posted it. Updated .