Attachment 2 Data Requirements.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

DD FORM 1423-2, AUG 96

CONTRACT DATA REQUIREMENTS LIST

(2 Data Items)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 220 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER _________________________

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION

12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

14. DISTRIBUTION

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page ____ of ____ Pages

A_CONTRACT_LINE_ITEM_NO:

B_EXHIBIT: A (FY 22)

TIM: Yes

OTHER:

D_SYSTEMITEM: Automatic Dual Indexing Table

E_CONTRACTPR_NO:

FCONTRACTOR:

1_DATA_ITEM_NO1: A002

2_TITLE_OF_DATA_ITEM1: Product Engineering Design Data and Associated Lists

3_SUBTITLE1:

4_AUTHORITY1: DI-SESS-81000F

5_CONTRACT_REFERENCE1: PD 22M-299A-OP Atch

6_REQUIRING_OFFICE1: AFLCMC/WNMM

7_DD_250_REQ1: N/A

8_APP_CODE1: N/A

9_dist1: D

10_FREQUENCY1: ASREQ

11_AS_OF_DATE1: ASREQ

13_DATE_OF_SUBSEQUENT_SUB1: See BLK 16

12_DATE_OF_FIRST_SUB1: See BLK 16 addr1_1:

draft1_1:

reg1_1:

repro1_1:

addr1_2: Ship with unit draft1_2:

reg1_2: 1 repro1_2:

addr1_3:

draft1_3:

reg1_3:

repro1_3:

addr1_4:

draft1_4:

reg1_4:

repro1_4:

addr1_5:

draft1_5:

reg1_5:

repro1_5:

addr1_6:

draft1_6:

reg1_6:

repro1_6:

addr1_7:

draft1_7:

reg1_7:

repro1_7:

addr1_8:

draft1_8:

reg1_8:

repro1_8:

addr1_9:

draft1_9:

reg1_9:

repro1_9:

addr1_10:

draft1_10:

reg1_10:

repro1_10:

addr1_11:

draft1_11:

reg1_11:

repro1_11:

addr1_12:

draft1_12:

reg1_12:

repro1_12:

addr1_13:

draft1_13:

reg1_13:

repro1_13:

addr1_14:

draft1_14:

reg1_14:

repro1_14:

15_total_Draft1: 0

15_TOTALReg1: 1

15_TOTALRepro1: 0

16_REMARKS1: BLK 12: Concurrent with delivery of production unit, contractor shall furnish and pack one (1) product engineering design data and associated lists with each unit. Ship with unit.

17_PRICE_GROUP1:

18_totalprice1:

1_DATA_ITEM_NO2: A003

2_TITLE_OF_DATA_ITEM2: Computer Software Product

3_SUBTITLE2:

4_AUTHORITY2: DI-IPSC-81488

5_CONTRACT_REFERENCE2: PD 22M-299A-OP Atch

6_REQUIRING_OFFICE2: AFLCMC/WNMM

7_DD_250_REQ2: N/A

8_APP_CODE2: N/A

9_dist2: D

10_FREQUENCY2: ASREQ

11_AS_OF_DATE2: ASREQ

12_DATE_OF_FIRST_SUB2: See BLK 16

13_DATE_OF_SUBSEQUENT_SUB2: See BLK 16 addr2_1:

draft2_1:

reg2_1:

repro2_1:

addr2_2: Ship with unit draft2_2:

reg2_2: 1 repro2_2:

addr2_3:

draft2_3:

reg2_3:

repro2_3:

addr2_4:

draft2_4:

reg2_4:

repro2_4:

addr2_5:

draft2_5:

reg2_5:

repro2_5:

addr2_6:

draft2_6:

reg2_6:

repro2_6:

addr2_7:

draft2_7:

reg2_7:

repro2_7:

addr2_8:

draft2_8:

reg2_8:

repro2_8:

addr2_9:

draft2_9:

reg2_9:

repro2_9:

addr2_10:

draft2_10:

reg2_10:

repro2_10:

addr2_11:

draft2_11:

reg2_11:

repro2_11:

addr2_12:

draft2_12:

reg2_12:

repro2_12:

addr2_13:

draft2_13:

reg2_13:

repro2_13:

addr2_14:

draft2_14:

reg2_14:

repro2_14:

15_total_Draft2: 0

15_TOTALReg2: 1

15_TOTALRepro2: 0

16_REMARKS2: BLK 12: Concurrent with delivery of production unit, the contractor shall furnish and pack one (1) computer software product with each unit. Ship with unit.

17_PRICE_GROUP2:

18_totalprice2:

G_PREPARED_BY:

H_DATE: 8/3/21

1_APPROVED_BY:

J_DATE: 8/16/21

Page: 2 of_pages: 2

Reset:

2021-08-16T11:05:17-0400

CAPUANO.FRANK.R.1403209658

2021-08-16T11:10:31-0400

SKINNER.KEVIN.L.II.1024227223

DATA ITEM DESCRIPTION

Title: PRODUCT ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

Number: DI-SESS-81000F Approval Date: 20190417

AMSC Number: 10017 Limitation:

DTIC Applicable: GIDEP Applicable:

Preparing Activity: AR Project Number: SESS-2019-023

Applicable Forms:

Use/relationship: Product Engineering Design Data and Associated Lists provide engineering data adequate to serve as an authoritative and complete technical description of an item. This data, when authorized, is adequate to support competitive procurement and maintenance for items interchangeable with the original items. This data represents the highest level of design disclosure.

a. This Data Item Description (DID) contains the format and content preparation instructions for

Product Engineering Design Data and Associated Lists resulting from the work task described in 5.4.1.3 of MIL-STD-31000.

b. This DID is applicable to acquisitions of military systems, equipment, and components. It is intended for acquiring Product Engineering Design Data and Associated Lists at the end of the Engineering and

Manufacturing Development Phase and during subsequent phases of the DoD materiel life cycle.

c. It is not intended that all the requirements contained herein should be applied to every program. This

DID should be tailored to the minimum data requirements of the applicable contract or purchase order.

d. This DID is related to DI-SESS-81001F, DI-SESS-81002F, and DI-SESS-81003F. This DID supersedes DI-SESS-81000E.

e. A purchased item, as defined by ASME Y14.24, an item which is sold or traded in the course of conducting normal business operations, is used by commercial industry, or is a specialized version of a supplier's general product line which he routinely customizes. Purchased items as used herein have also been referred to as vendor items or vendor-developed items.

Requirements:

1. Reference documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2. General. Product Engineering Design Data and Associated Lists shall meet the requirements of MIL-

STD-31000. Product Engineering Design Data and Associated Lists shall provide the design disclosure information necessary to serve as a clear, complete and accurate technical description of an item sufficient to enable a manufacturer of similar products at the same or similar state of the art to produce and maintain quality control of item(s) so that the resulting physical and functional characteristics duplicate those of the specified item. These design data shall:

a. Reflect the end product at its current level of design maturity.

DI-SESS-81000F

b. Provide the engineering data for logistics support products.

c. Provide the necessary data to permit competitive acquisition and manufacture of the original item(s).

3. Format. Product Engineering Design Data and Associated Lists shall be in either the contractor's format or the Government's format as specified on the TDP Option Selection Worksheet incorporated into the contract or purchase order.

4. Content. Product Engineering Design Data and Associated Lists shall conform to the requirements of

ASME Y14.100, or, if applicable, ASME Y14.100 and Appendices B through E, as required, ASME

Y14.34, ASME Y14.41 and/or ASME Y14.41.1. They shall document directly or by reference the following, as applicable:

a. Details of unique processes, i.e., not published or generally available to industry, when essential to design and manufacture.

b. Performance ratings.

c. Dimensional and tolerance data

d. Critical manufacturing processes and assembly sequences.

e. Toleranced input and output characteristics.

f. Diagrams.

g. Mechanical and electrical connections.

h. Physical characteristics, including form, finishes, and protective coatings.

i. Details of material identification, including material condition, and mandatory treatments and coatings.

j. Inspection, test and evaluation criteria.

k. Equipment calibration requirements.

l. Quality assurance requirements.

m. Hardware marking requirements.

n. Requirements for reliability, maintainability, environmental conditioning, shock and vibration testing and other operational or functional tests.

o. Vendor substantiation data when required by the contract or purchase order.

DI-SESS-81000F

p. Requirements for programming software into devices or assemblies including a description of the input media and the procedures for validating that the software has been installed correctly.

q. Special consideration items and processes.

5. Item definition. All parameters required to define each unit, assembly, subassembly, part or material shall be presented on the applicable design data document. This includes data such as:

a. All necessary mechanical dimensions to fully define fabrication, acceptance, interface or installation of the item depicted.

b. All necessary electrical parameters to fully define fabrication, acceptance, interface or installation of the item depicted.

c. All other necessary physical parameters to fully define fabrication, acceptance, interface or installation of the item depicted, i.e., weight, pressure, viscosity, etc.

d. All necessary environmental conditions which units, assemblies, subassemblies, parts and materials must meet to perform effectively in the end item, such that the end item will meet its specification requirements.

6. CAGE code and document numbers. Product Engineering Design Data and Associated Lists shall be identified with the contractor's CAGE code and contractor document numbers or with a Government

CAGE code and document numbers as specified in the TDP Option Selection Worksheet incorporated in the contract or purchase order.

7. Selection of design data. The types of design data (e.g. drawings, models, 3Di viewables, etc.) required shall be as stated in the TDP Option Selection Worksheet incorporated in the contract or purchase order.

7.1. Vendor Item Control Documents. Vendor Item Control Documents shall be used to specify the requirements for purchased items when such items have been approved for use in the design and are used without alteration, selection or source qualification (testing of an item prior to procurement action to ensure that it satisfies the specified requirements).

7.2. Source Control Documents. Source Control Documents shall be used to specify the requirements for purchased items only when such items have been approved for use in the design and:

a. the item is for a critical application and

b. the requirements can be met by an item from one or more sources and

c. the application required source qualification (testing of an item prior to procurement action to ensure that it satisfies the specified requirements).

7.3. Standard Microcircuit Drawings. Standard Microcircuit Drawings (MIL-HDBK-780) shall be used to specify the requirements of microcircuits.

End of DI-SESS-81000F.

Computer Software Product

Product Drawings DID

TM-86-01Q 27 Oct 2017 1-01: AF TMSS Linear TMs

Air Force Technical Manual Contract Requirements (TMCR) for

AIR FORCE CALIBRATION AND METROLOGY (AFMETCAL) PROGRAM

Automatic Dual Indexing Table

ATTACHMENT DD FORM 1423, TO CDRL SEQUENCE NUMBER 001, EXHIBIT A REQUEST FOR

PROPOSAL/CONTRACT:

Date: 2 August 2021

SECTION 1. TECHNICAL ORDER (TO) PROGRAM REQUIREMENTS

1. TMCR Tailoring. This TMCR has been tailored by the program office, including the associated tables, matrices and Specification/Standard Interface Records (SIRs). The Contractor may propose and submit, in writing, additional tailoring to the Technical Order Manager Agency/Agent (TOMA), Government

Program Manager (PM), and Procuring Contracting Officer (PCO) for consideration. The tailored TMCR shall be attached to the Contract Data Requirements List (CDRL) for Technical Order (TO) delivery, and shall be included in the proposal as a separate exhibit, referenced in the proposal Statement Of Work

(SOW). Air Force (AF) TO Acquisition procedures, including procedures for tailoring this document, are found in TO 00-5-3, AF Technical Order Life Cycle Management, located at http://www.tinker.af.mil/Home/TechnicalOrders.aspx. A copy may also be obtained from the Program

TO Manager. Any terms or procedures found in this document may be researched there.

2. TO Program Scope. The Contractor shall develop and deliver technical manuals in accordance with

(IAW) this TMCR that supports the AFMETCAL requirements for technically usable manuals. The technical manuals will include Operation and Maintenance Instructions, Illustrated Parts Breakdown, and

Calibration Process/Procedure in a Portable Document Format (PDF). PDF TO Publications may be produced and distributed as physical media (Paper/CD) or electronically via Enhanced Technical

Information Management System (ETIMS) electronic TO Viewer (eTOV).

3. Commercial Manuals. Contractors shall recommend the use of existing commercial manuals to the maximum extent possible without impairing program support objectives. All proposed commercial manuals are subject to Government review and approval. Contractors shall use Data Item Description

(DID) DI-TMSS-80067C, Technical Manual (TM) Contractor Furnished Aeronautical Equipment or

Contractor Furnished Equipment (CFAE/CFE) Notices, to provide recommendation data. A copy is available through ASSIST at http://quicksearch.dla.mil/qsSearch.aspx.

3.1. The AF requests the ability to electronically store, print, distribute, update and decollate the commercial manual to allow for printing. Commercial manuals shall be delivered as Portable

Document Format (PDF) unless otherwise specified.

3.2. Approved Commercial-Off-The-Shelf (COTS) Manuals shall be delivered with an Identifying

TO Publication Sheet (ITPS), IAW MIL-PRF-32216, Performance Specification: Evaluation Of

Commercial Off-The-Shelf (COTS) Manuals And Preparation Of Supplemental Data. All PDF files of commercial data shall be non-password protected to allow the AF to decollate the manual for printing.

http://www.tinker.af.mil/Home/TechnicalOrders.aspx http://quicksearch.dla.mil/qsSearch.aspx

3.3. If the proposed COTS data is found to be insufficient after review by the Government, the

Contractor shall prepare supplemental data for the COTS manual as required IAW Military Standard

(MIL-STD)-38784. If the COTS data cannot be supplemented sufficiently the Contractor may be tasked to develop new TM data IAW the applicable TMSS listed in Section 2, Table 1.

4. Technical Manual Specifications and Standards (TMSS) Tailoring. The contractor shall develop all

TMs IAW most current version of applicable TMSS for the type manual being developed and comply with the Specification/Standard Interface Records (SIRS) provided within Section 3.

5. Subsequent TO/Data Requirements. (Deleted)

6. TO Development. TOs shall be written to a scope and depth of coverage to support the AFMETCAL operations and maintenance concepts.

6.1. Standard Generalized Markup Language (SGML) tagged TO files shall include required illustration (graphics) files in an approved graphics exchange format. Illustration files developed and delivered for other purposes shall be used in lieu of developing special TM illustration files whenever possible. All delivered graphics shall conform to the approved graphic creation and format guidelines listed in Attachment 1, Graphics Format Guidelines. For assistance with illustration requirements contact AF TMSS via (e-mail: SGMLSupport@us.af.mil).

6.2. (Deleted)

7. TO Numbering. (Deleted)

8. Data Rights. Contractors shall comply with 10 U.S.C. 2320 and cognizant Defense Federal Acquisition

Regulation Supplement (DFARS) provisions and clauses in providing Unlimited Rights for all source data, TO publications, and TO updates prepared specifically for the contract. Government rights in data are specified in the DFARS, 252.227-7013, Rights in Technical Data, Noncommercial Items, 252.227-

7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software

Documentation, and 252.227-7015, Technical Data-Commercial Items. The Government shall be given

Unlimited Rights for all Government-funded business rules (tailoring and application methods and procedures) and documented business processes developed under the contract for the purpose of TO development. For all data delivered to the Government with other than Unlimited Rights, the Contractor shall assert their data rights IAW DFARS 252.227-7017, Identification and Assertion of Use, Release, or

Disclosure Restrictions. The Contractor shall pass through and enforce all requirements in this TMCR to all sub-Contractors.

9. Classification, Distribution, Destruction, Disclosure, Export Control Notices, and Cyber Security.

Contractors shall recommend the correct markings and controls for classified and restricted distribution data and TOs IAW the program’s Security Classification Guide (SCG) and Department of Defense

Manual (DODM) 5200.01, Department of Defense Instruction (DODI) 5230.24, Department of Defense

Directive (DODD) 5230.25, Air Force Instruction (AFI) 16-1404, and MIL-STD-38784 (available at http://www.e-publishing.af.mil/ or https://assist.dla.mil/online/start/index.cfm). The markings and notices shall be reviewed during In-Process Reviews (IPR). The Contractor shall also apply policy and procedures for Cyber Security Protection IAW AFI 33-200, Information Assurance (IA) Management, AFMAN 17-1301, Computer Security (COMPUSEC), and MPTO 00-33B-5008, Remanence Security for

Information Systems. NOTE: Distribution limitations will be determined on a case-by-case basis as TOs are developed, dependent upon TO content.

mailto:SGMLSupport@us.af.mil http://www.e-publishing.af.mil/ https://assist.dla.mil/online/start/index.cfm

10. TO Quality. Contractor proposals shall describe how the Government will be allowed to interact with the Contractor’s TO development team. The Contractors shall ensure prepared TOs are: a) technically accurate and safe; b) written to a scope and depth of coverage to support the operations and maintenance concepts; c) properly classified and marked with export control and distribution limitation statements.

11. TO Delivery. TO file delivery requirements are located in Section 2, Table 3 of this document.

11.1. MIL-SPEC (SGML) Tagged Files. The Contractor shall parse all SGML files required for the

TOs prior to Government delivery and shall verify the SGML is compliant with the appropriate DTD.

NOTE: The Government will parse the files prior to acceptance using the public domain SGML parser (http://www.jclark.com/sp/).

12. Source Data Maintenance. (Deleted)

13. TO Maintenance. (Deleted)

14. Schedules. (Deleted)

15. Time Compliance Technical Orders (TCTOs). (Deleted) http://www.jclark.com/sp/

SECTION 2. TM TYPE AND DELIVERY REQUIREMENTS

NOTES:

Mark the TM Type Selection Tables indicating the applicable TO types and related specifications.

(NEW DEVELOPMENT) LINEAR TM TYPE (PUBLICATION) SELECTION TABLES.

TABLE 1

TMSS REQUIREMENTS FOR THE AFMETCAL

Title or Type of Manuals Specification Required

1. Inspection TOs MIL-DTL-5096

a. Inspection and Maintenance Requirements (-6) Manual

b. Acceptance and Functional Check Flight (FCF) Procedures (-6CF)

Manual

c. Acceptance and Functional Check Flight (-6CL) Checklist

d. Inspection Workcards (-6WC)

e. Maintenance/Operations Checklists

2. Cargo Aircraft Loading and Offloading TOs MIL-DTL-5288

a. Loading Instructions Manual

b. Nuclear Weapon Cargo Loading Manual

c. Checklists

3. Weight and Balance (Aircraft) MIL-DTL-5920

a. Loading Data Manual

b. Sample Basic Weight Checklists

4. Flight Manuals MIL-DTL-7700

a. Flight Manual

b. Performance Data Manual

c. Mission Crew Manual

d. Supplemental Manual

e. Abbreviated Flight Crew Checklist

5. List of Applicable Publications MIL-DTL-8031

6. Structural Repair Manuals (for Aircraft) MIL-DTL-9854

7. Munitions/Weapons Loading Procedures, Non- nuclear and Nuclear TOs MIL-DTL-9977

a. Nuclear Weapons Basic Information and Loading Procedures

b. Nuclear Weapons Loading Procedures

c. Non-nuclear Munitions Basic Information

d. Non-nuclear Loading Procedures

e. Non-nuclear Munitions Loading Standard Data Packages (SDPs)

f. Loading Procedures Checklist

g. Single Loading Procedures Checklist

h. Integrated Loading Procedures Checklists

i. Family Group Loading Procedures Checklist

j. Nuclear Weapons Loading Procedure Checklists

k. Functional Check Procedures Checklist

l. NATO Stage B Cross-Servicing Checklists

m. End of Runway (EOR) Procedures Checklist

8. Space Operations and Support Documentation TOs

-- MIL-SPEC (Intercontinental Ballistic Missiles)

-- MIL-SPEC (Space)

MIL-PRF-38311

MIL-PRF-38314

a. Operations Manual

b. Operations Checklists

c. Technical Manuals and Related Checklists

9. Nuclear and Non-nuclear Weapon Delivery and Aircrew Procedures

Manuals and Checklists

MIL-DTL-38384

a. Non-nuclear Weapon Delivery Manual

b. Aircrew Nuclear Bomb Delivery Manual (Strategic Bomber Aircraft)

c. Aircrew Nuclear Missile Delivery Manual (Strategic Bomber Aircraft)

d. Aircrew Nuclear Bomb Delivery Manual (Tactical Aircraft)

e. Non-nuclear Weapon Delivery Checklist

f. Nuclear Weapon Delivery Checklist (Strategic Bomber Aircraft)

g. Aircrew Nuclear Bomb Delivery Checklist (Tactical Aircraft)

h. Non-nuclear Weapon Delivery Source Data Packages

10. Work Unit Code Manual

a. Standard WUC Manual

b. Two Chapter Manual

c. Three Chapter Manual

MIL-DTL-38769

11. Calibration Procedures MIL-DTL-38793

12. Time Compliance Technical Orders (TCTOs)

a. TCTO

b. TCTO Supplement

MIL-DTL-38804

13. Aircraft Battle Damage Assessment and Repair TOs MIL-DTL-87158

14. Illustrated Parts Breakdown MIL-DTL-38807

15. On-Equipment Organizational Maintenance Manual Set MIL-DTL-83495

a. General Equipment (GE) Manual

b. General System (GS) Manuals

c. Combined GE & GS Manual

d. Job Guide (JG) Manuals

e. Fault Reporting (FR) Manual

f. Fault Isolation (FI) Manual

g. Wiring Data (WD) Manual

h. Schematic Diagram (SD) Manual

16. Operation and Maintenance Instructions in Work Package Format MIL-DTL-87929

a. Maintenance Manuals

(1) Organizational Maintenance

(2) Intermediate Maintenance

(3) Depot Maintenance

(4) Combined (I&D) Maintenance

(5) On Condition Maintenance

b. Operation & Maintenance Instruction Manuals

c. Special Manuals

(1) Aircraft Engine Testing and Trending Procedures

(2) Aircraft Power Package Testing Procedures

(3) Static Firing of Missile Motors

(4) System Peculiar Corrosion Control

(5) Nondestructive Inspection (NDI)

(6) Aircraft Structural Integrity Program (ASIP)

(7) ATE Operator Test Procedures

(8) Special Requirements for Storage and Maintenance Procedures;

AUR Munitions/Launchers and Associated Support Equipment, Conventional Components and CMBR Agents

(9) Parachute Packing Procedures

(10) Operators Instructions (Hand-Held Flight Computers)

(11) Installation-Engineering Facility (Ground C-E Equipment)

d. Checklists (IAW MIL-DTL-5096)

e. With Illustrated Parts Breakdown

17. Commercial Manuals (Evaluate according to MIL-PRF-32216)

18. Aircraft Cross-servicing Guide MIL-DTL-22202

TABLE 3 – LINEAR TM DELIVERY REQUIREMENTS

FOR THE AFMETCAL

NOTES:

For Paper media delivery indicate required quantity

DELIVERY SCHEDULE

Event Number of days data required prior to event

Technical

Review(s)

(30 DACA)

Final TO

Distribution

(Ship With

Prod Unit)

Enter physical mailing address, electronic delivery location or web access point

Legend: DACA - After Contract Award

DAFAOK - Days after First Article accepted (passes

Acceptance testing)

Engineering (Draft) Copy AFLCMC/WNMRP/AFMETCALDivision

ATTN: Mike Hickey michael.hickey.2@us.af.mil 813 Irving Wick Drive West, Bldg 2

Heath, Ohio 43056

IPDF / 1 IPDF / IPDF / IPDF /

Proposal Evaluation unit Bionetics Transportation ATNN: Deanna Neece 813 Irving Wick Drive West, Bldg 4, Door

15 Heath, Ohio 43056

IPDF / IPDF / IPDF / IPDF /

Administrative (Logistics) Copies AFLCMC/WNMRP/AFMETCALDivision

ATTN: Mike Hickey michael.hickey.2@us.af.mil 813 Irving Wick Drive West, Bldg 2

IPDF / IPDF / IPDF / IPDF /

Final (Production) Copies (ship w/ unit) Bionetics Transportation ATNN: Deanna Neece 813 Irving Wick Drive West, Bldg 4, Door 15

IPDF / IPDF / IPDF / IPDF / 1

Total Paper Copies Required: 1 1

SECTION 3. DELETED

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

14. DISTRIBUTION

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

A_CONTRACT_LINE_ITEM_NO:

B_EXHIBIT: A(FY 22)

TDP:

TM: x

OTHER:

DSYSTEMITEM: Automatic Dual Indexing Table

E_CONTRACTPR_NO:

FCONTRACTOR:

1_DATA_ITEM_NO: A001

2_TITLE_OF_DATA_ITEM: Technical Manual Contract Requirements (TMCR)

3_SUBTITLE:

4_AUTHORITY_Data_Acquisit: TM-86-01

5_CONTRACT_REFERENCE: PD 22M-299A-OP Atch

6_REQUIRING_OFFICE: AFLCMC/WNMM

7_DID_250_REQ: N/A

8_APP_CODE: N/A

DIST_STATEMENT: D

10_FREQUENCY: ASREQ

11_AS_OF_DATE: ASREQ

12_DATE_OF_FIRST_SUBMISSI: See BLK 16

13_DATE_OF_SUBSEQUENT_SUB: See BLK 16 addressee1:

draft1:

reg1:

repro1:

addressee2: 1. AFMETCAL draft2:

reg2:

repro2:

addressee3: Attn: Mike Hickey draft3:

reg3:

repro3:

addressee4: 813 Irving Wick Dr., W. Horton Building draft4: 1 reg4:

repro4:

addressee5: Heath, OH 43056 draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12: Ship to addressee draft12:

reg12: 1 repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 reg38t: 1 total_repro: 0

16_REMARKS: BLK 8: A copy of the Draft Manual is due 410 days after contract award. The Government has 30 calendar days to review the preliminary draft. The contractor has 10 calendar days after receipt of Government comments to prepare and deliver revised data. Criteria for approval shall meet the Government comments. Reference the contract number in all correspondence.

BLK 9: The following statement shall be included on the manuals:

DISTRIBUTION STATEMENT D: DoD and US DoD contractors only

Blk 13: No later than 500 days after contract award, concurrent with delivery of production unit, the contractor shall furnish and pack 1 set of manuals with the production unit. Manuals shall be on CD/DVD in Indexed Portable Document Format (iPDF). Ship with unit.

17_PRICE_GROUP:

ESTIMATED_TOTAL_PRICE:

G_PREPARED_BY:

H_DATE: 8/16/21

1_APPROVED_BY:

J_DATE: 8/16/21

Page: 1 of_pages: 2

Reset:

2021-08-16T11:01:39-0400

CAPUANO.FRANK.R.1403209658

2021-08-16T11:09:50-0400

SKINNER.KEVIN.L.II.1024227223