Attachment 2 - Cisco Network Equipment SOR 17 Sep 2020.pdf

STATEMENT OF REQUIREMENTS

42MDG Cisco Network Equipment

1. Introduction and Background. The 42nd Medical Group at Maxwell AFB, AL has a requirement to modernize the main Maxwell Non-Classified Internet Protocol Router (NIPR) switch infrastructure. The current equipment is end-of-life and needs to be replaced. There is currently no support for the existing switches.

2. DISCRIPTION OF THE ITEMS. The new equipment requirements consist of new NIPR networking switch equipment.

3. Networking Equipment: The contractor shall provide the following new Cisco Network switching equipment and licensing to be compatible with existing Cisco Networking equipment. Contractor shall provide the equipment in Table 3.1. The contractor will not be required to install equipment listed in Table 3.1.

3.1.

Manufacturer Description Part Nbr U/I QTY

Cisco Cisco Catalyst 2960X-48LPS-L 48-Port Gigabit Ethernet Switch

WS-C2960X-48LPS-L EA 34

Cisco Cisco FlexStack cable 1.6ft CAB-STK-E-0.5M EA 30

Cisco Cisco FlexStack-Plus Network Stacking Module for Catalyst 2960X

C2960X-STACK= EA 30

Cisco Catalyst 3850-S-S 24-Port Fast Ethernet Switch WS-C3850-24S-S EA 2

Cisco Cisco Stackwise 480 stacking cable 1.6 Ft STACK-T1-50CM EA 2

Cisco 350W Hot Plug/Redundant Power Supply for 3850 PWR-C1-350WAC EA 2

Cisco SFP (mini-GBIC) transceiver module - Gigabit Ethernet Single Mode

GLC-LH-SMD EA 72

4. Delivery:

Description Delivery

Ordering 30 Days after receipt of order

5. Warranty: All ITS equipment and cabling supplied must be ITS standard products and supplied from a reputable manufacturer and must carry a minimum 1 year manufacture warranty. No refurbished, recertified, reconditioned, or remanufactured items will be accepted.

Shipping Information: The contractor shall provide and deliver the new equipment to: Maxwell

ADPE Warehouse, 455 S Kelly St Bldg. 1154, Maxwell AFB AL 36112.