Attachment 1 - Technical Specifications.pdf
PDF 97 KB Posted
- Attached to
- Fabrication Band Saw Federal contract opportunity
- Solicitation number
- FA560623Q2089
About this file
This document contains technical specifications for a band saw required under a federal contract opportunity. The specifications call for a DOALL 3613-V5 Band Saw or equal with the following features: a maximum cutting width of 36 inches, maximum cutting height of 13 inches, positive 10 degree and negative 45 degree table tilt, saw blade width capacities from 1/8 to 1 inch, 199 inch saw blade length, 5 horsepower motor, high range band speed of 550 to 5500 fpm, floor space dimensions of 39 by 81 by 82 inches, and a weight of 1550 pounds. Electrical requirements include 230V 3-phase Wye configuration and total amp draw ranging from 10.7 to 5.3 amps depending on voltage. Additional requirements include aluminum bandwheels, guide blocks, tension indicator, safety features, and a recommended DoALL bi-metal saw blade and accessories. The related federal contract opportunity is solicitation number FA560623Q2089 from the Department of the Air Force for the fabrication of a band saw.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Combo FA560623Q2089 - Fabrication Band Saw.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Technical Specification Requirements--DO All 3613-V5 Band Saw or equal item
-Maximum Cutting Width-36”
-Maximum Cutting Height-13”
-Table Tilt Degree- Positive 10 degree, Negative 45 Degree
-Saw Blade Width Capacities: 1/8 inch to 1 inch
-Saw Blade Length: 199 inches
-Band Drive: 5 Horsepower Motor
-Band Speed: High Range 550 to 5500 fpm
-Floor Space Dimensions: 39 Inches Wide by 81 Inches Long by 82 Inches High
-Machine Weight: 1550 Pounds
Electrical
-Voltage Requirement-230V -3ph Wye configuration (Must Specify at Order Placement)
-Total Amp Draw: (FLA) 10.7(208) 10.7(230) 5.3(460)Amps
-20" Aluminum bandwheels with crowned rubber tires.
-Upper wheel adjustment 3"
-Operator controls mounted on column.
-One set of high speed, insert type guide blocks for bands 1/8" to 1/2"
-One set of steel guide inserts for bands 1/4", 3/8", 1/2"
-Band wheel brush
-Variable frequency band drive.
-Work light
-Manual band tension with indicator.
-Post elevating hand wheel.
-Chip box
-Chip blower (plant air required)
-Saw blade guards.
-Band door interlocks.
-Operation and parts manuals on USB stick.
-Recommended job selector
-One (1) DoALL Bi Metal saw blade.
-Insert setting gages with wrench and trunnion wrench
File details come from the government source that posted it. Updated .